• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제37회 하계학술대회 초록집
• /
• pp.400-400
• /
• 2009

• 한국초전도ㆍ저온공학회논문지
• /
• 제6권3호
• /
• pp.6-11
• /
• 2004

YBa$_2$Cu$_3$$O_{7-x}$ (YBCO) films were deposited on MgO(100) and SrTiO$_3$(100) single crystal substrates by cold-wall type MOCVD method using continuous source supplying system. Under the deposition temperature of 740∼76$0^{\circ}C$, c-axis oriented YBCO films were obtained. In case of the YBCO films deposited on MgO (100) single crystal substrate, the critical temperature (T$_{c}$) was under 81 K regardless of the deposition conditions, whereas T$_{c}$ of the YBCO films deposited on SrTiO$_3$(100) single crystal substrate was 83∼84 K. The critical current (I$_{c}$) of the YBCO film deposited on SrTiO$_3$(100) single crystal substrate for 30 min was 49 A/cm-width and the critical current density (J$_{c}$) was 0.82 MA/$\textrm{cm}^2$ to film thickness of 0.6 ${\mu}{\textrm}{m}$. I$_{c}$ increased to 84.4 A/cm-width as the deposition time increased to 50 min, but J$_{c}$ decreased to 0.53 MA/$\textrm{cm}^2$ to film thickness of 1.8 ${\mu}{\textrm}{m}$.rm}{m}$.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2019년도 학술발표회
• /
• pp.162-162
• /
• 2019

Water Distribution Network (WDN) is a critical infrastructure to be maintained ensuring proper water supply to wide-spread consumers. The WDN consists of pipes, valves, pumps and tanks, and these elements interact each other to provide adequate system performance. If elements fail by internal or external interruptions, it may result in adverse impact to water service with different degree depending on the failed element. To determine an appropriate maintenance priority, the critical elements need to be identified and mapped in the network. In order to identify and prioritize the critical elements in WDN, an element-based simulation approach is proposed, in which all the elements composing the WDN are reviewed one at a time. The element-based criticality is measured using several resilience indexes that are newly developed in this study. The proposed resilience indexes are used to quantify the impacts of element failure to water service degradation. Here, three resilience indexes are developed, such as User Demand Severity, Economic Value Loss and Water Age Degradation, each of which intends to measure different aspects of consequences, such as social, economic, and water quality, respectively. For demonstration, the proposed approach is applied to a benchmark water network to identify and prioritize the critical elements.

• Nuclear Engineering and Technology
• /
• 제54권7호
• /
• pp.2650-2659
• /
• 2022

The dense granular flow spallation target is a new target concept proposed for an Accelerator-Driven Sub-critical (ADS) system. In this paper, the beam-target configurations of a tungsten granular flow target for the ADS with a thermal power of 1 GW is explored. The beam profile options using different scanning methods are discussed. The critical geometry parameters are adjusted to investigate the performance of the granular target from the aspects of neutron efficiency, stability and temperature distribution in target medium. To figure out how the target under accident conditions would behave, different clogging conditions are induced in the simulation. The dynamic processes are analyzed and some important parameters such as abnormal temperature rise and beam cutoff time window are obtained. The response of the sub-critical reactor to a clogging accident is also investigated. It is indicated that the monitoring of the granular flow by the neutron detectors in the sub-critical core will be effective.

• 터널과지하공간
• /
• 제16권1호
• /
• pp.85-94
• /
• 2006

본 연구에서는 장대 터널 화재시 발생되는 역기류를 제압하는 최적의 임계속도를 결정하기 위하여 제연설비를 가동시키는데 소요되는 시간, 피난자들의 대피시간 등에 대한 연구 자료들을 취합, 분석하였고, 이를 토대로 화재 시나리오를 설정하여 축소 모형실험을 실시하였다. 비상 환기시스템 가동시점을 분석한 결과, 화재 발생후 약 240초(약 4분)후 비상 환기시스템이 가동하게 되며, 제연팬 가동 후 4분 이내에 역기류를 제어할 수 있는 임계속도를 확보하는 것이 실제 터널에 적합한 시간 시나리오였다. 화재지점 주변의 역기류 분포를 분석하기위해 Froude 상사이론에 기초한 아크릴 재질의 축소비 1/50의 모형(직경 : 0.2m, 연장 : 20 m)을 제작하였고, Tetzner 식의 보정계수$(\beta)$를 변화시키며 화재지점 주변의 CO농도를 측정한 결과, 보정계수가 0.5인 경우에 피난허용시간 기준에 적합한 제연효과를 나타내었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제19권2호
• /
• pp.19-24
• /
• 2017

Cryogenic milling which is a combined process of low-temperature treatment and mechanical milling was applied to fabricate high critical current density $(J_c)MgB_2$ bulk superconductors. Liquid nitrogen was used as a coolant, and no solvent or lubricant was used. Spherical Mg ($6-12{\mu}m$, 99.9 % purity) and plate-like B powder (${\sim}1{\mu}m$, 97 % purity) were milled simultaneously for various time periods (0, 2, 4, 6 h) at a rotating speed of 500 rpm using $ZrO_2$ balls. The (Mg+2B) powders milled were pressed into pellets and heat-treated at $700^{\circ}C$ for 1 h in flowing argon. The use of cryomilled powders as raw materials promoted the formation reaction of superconducting $MgB_2$, reduced the grain size of $MgB_2$, and suppressed the formation of impurity MgO. The superconducting critical temperature ($T_c$) of $MgB_2$ was not influenced as the milling time (t) increased up to 6 h. Meanwhile, the critical current density ($J_c$) of $MgB_2$ increased significantly when t increased to 4 h. When t increased further to 6 h, however, $J_c$ decreased. The $J_c$ enhancement of $MgB_2$ by cryogenic milling is attributed to the formation of the fine grain $MgB_2$ and a suppression of the MgO formation.

• Progress in Superconductivity
• /
• 제12권1호
• /
• pp.6-11
• /
• 2010

The milling effects of a precursor $Y_2BaCuO_5$ (Y211) powder having 1 wt.% $CeO_2$ on the microstructure and critical current density ($J_c$) of liquid infiltration growth (LIG) processed $YBa_2Cu_3O_{7-y}$ (Y-123) bulk superconductors were investigated. The microstructure analysis revealed that the Y211 size in the final Y-123 products decreased with increasing the milling time and a relatively high density and uniform distribution of Y211 inclusions were observed in the sample prepared using 8 h milled powder. However, the unexpected Y211 particles coarsening was observed from the 4 h milled sample which was further increased for 10 h milled sample. Critical current density ($J_c$) of the LIG processed Y-123 bulk superconductors was found to be dependent on the milling time of the Y211 precursor powder. The $J_c$ increased with the increase of milling time and reached up to a maximum at 8 h in the self field while 10 h milled sample showed lower $J_c$ at the same field which might be due to the exaggerated growth and non-uniform distribution of Y211 particles.

• 간호행정학회지
• /
• 제17권1호
• /
• pp.66-73
• /
• 2011

Purpose: The purpose of this study was to demonstrate effects of a critical pathway (CP) for stroke patients seen in emergency rooms (ER). Method: The CP developed by the CP committee consisted of 8 criteria: behavior of doctors and nurses, laboratory tests, Image testing, medication, treatment, activity, and nutrition. According to application of CP, a control group (n=17) and experimental group (n=17) were defined. Time was checked by the electronic medical records. Result: Use of CP for stroke patients in the ER, resulted in a decreased length of stay in ER (t=2.341, p=.026), and time required for image testing (t=2.623, p=.021), and an increased number of patients using rtPA ($x^2$=4.802, p=.049). Time required for neurology doctor contact, for neurology doctor to see patient in the ER, and for report of blood tests decreased, but there were no statistical significance. Conclusion: Quick responses are most important in the ER, so CP for these patients is a very effective patient management tool. To reduce delay in stroke diagnosis, continuous education programs for similar symptoms are necessary. CPs for other patients in the ER should be developed, and studies on cost and satisfaction, as well as length of stay, should be done.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2006년도 춘계공동학술대회
• /
• pp.237-249
• /
• 2006

Critical incident can be happened at any time, any places without any pre-notification. For minimizing the loss of the life safety, financial and so on caused by the risk, most of company needs a system what can activate the critical incident management plan to prevent, plan for and respond to events that become critical incident. But a lot of company still don't have such a detailed system in our country and almost company has no effective training way for to boot. This paper shows the way to activate the risk management system to work efficiently the plan. The training way, proposed by this paper, is a incident command simulator based on virtual reality and scenario generation software.

• International Journal of Railway
• /
• 제5권1호
• /
• pp.48-54
• /
• 2012

The main purpose of this study is to highlight the importance and validity of introduction of stress-concerned aptitude items for the safety critical workers, corresponding to the radical environmental change in railway industry. To attain this purpose, the author performed a brief literature survey, and scrutinized the western practice in detail. Then, the necessity of introduction of stress-related aptitude items was suggested, based on the statistics resulted from a survey which has been once performed for experts and drivers. The final conclusion is that the present selection system through which the safety critical workers are being staffed, without any rigorous screening mechanisms cannot but have some limitations. So, an overall restructuring for aptitude management system needs to be done in order for us to advance to the position of upper-class railway country.