• 한국세라믹학회지
• /
• 제43권4호
• /
• pp.203-206
• /
• 2006

Polyacrylonitrile (PAN) nanofibers, which are pH-sensitive and exhibit soft actuation as a linear actuator and artificial muscles, were prepared by electrospinning to investigate the effect of viscosity on the morphology of PAN fibers. Experimental results revealed that higher viscosity is critical for the formation of unbeaded nanofibers because surface tension is almost constant throughout the experiment. Uniform, smooth, and continuous fibers with diameters of about 700 nm were achieved for the 10 wt% PAN fibers at a flow rate of 0.5 mL/h and an electric field of 0.875 kV/cm.

• 대한조선학회논문집
• /
• 제33권4호
• /
• pp.133-141
• /
• 1996

하중 전달형 필릿 용접 이음부에서 피로파괴는 용접투우부와 용접루트부로 부터 발생된 피로균열 발생 및 전파의 특성에 지배된다. 또한 그 피로균열의 특성은 필릿의 형상과 응력범위에 따라 큰 영향을 받는다. 본 연구의 목적은 하중 전달형 십자형 필릿 용접 이음부에서 피로하중 작용시 용접토우부에서 파괴하기 이한 용접부의 임계다리길이와 응력범위등을 검토하는 것이다.

• 대한화장품학회지
• /
• 제10권1호
• /
• pp.42-48
• /
• 1984

The comparative detergency of Sodium dodecyl sulfate (SDS) solution near the first critical micelle concentration (CMC) was measured by means of a 131 I-labelled castor oil as a soil. More than 95% radiochemical purity of 131 I-labelled castor oil was obtained using potassium lidide as a carrier. Polyester test fabric was soiled with 131 I-labelled castor oil, and washed in a conventional washing apparatus mounted on appropriate devices. Fabric radioactivities were measured before and after washing by a scintilation counter. Near the first CMC, the detergency of SDS was increased with decreasing of surface tension of SDS. It was also shown that 131 I-labelled castor oil was useful for studying the detergency of SDS.

• 대한화학회지
• /
• 제20권6호
• /
• pp.460-468
• /
• 1976

액체분자는 고체 및 기체와 같은 자유도를 갖는다는 가정하에 물에 관한 이론을 얻었다. 고체와 같은 분자의 진동수를 알아내는 데에 분광학적인 데이타를 이용하였다. 몰부피, 증기압, 엔트로피, 증발 엔트로피, 팽찰률, 압축률, 일정한 부피 및 일정한 압력하에서의 열용량, 표면장력, 임계점등을 계산한 결과 모두가 실험치와 아주 잘 일치하였다.

• 한국응용과학기술학회지
• /
• 제9권1호
• /
• pp.1-6
• /
• 1992

New five N-acyl-N-methyl taurate and their sodium salts were synthesized by acylating sodium N-methyl taurate in water in the presense of inorganic alkali as a catalyst. Wherein acyl group is a straight-chain radical of 10 to 18 carbon atoms. These compounds were identified by infrared spectroscopy. Surface activities of these sodium N-acyl-N-methyl taurate including surface tension, Ross-Miles foaming powers, foam stabilities, emulsifying powers and detergency were measured respectively. Also critical micelle concentration(cmc) were evaluated. Consequently these anionic surfactants with long chain acyl amine showed good emulsifying power of O/W type and had a good detergence.

• 대한화학회지
• /
• 제8권3호
• /
• pp.125-127
• /
• 1964

고체상태에서 trans-form으로 존재하는 염화에틸렌은 액체로 되면서 그 일부가 gauche-form으로 변한다. H. Eyring 등에 의해서 제안된 액체구조에 관한 이론에 따라서 이 물질에 대한 분배함수를 정하고, 분배함수속에 들어 있는 parameters $E_s$, ${\theta}$, $V_s$ 및 a를 정하였다. 이와 같이 해서 정한 분배함수를 써서 몰부피, 증기압, 한계점 성질, 증발엔트로피 및 표피장력 등을 계산하여 실험치와 비교하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.391-394
• /
• 2005

A theoretical model was developed to predict the shear strength of slender reinforced concrete beams. The shear force applied to a cross-section of the beam was assumed to be resisted primarily by the compressive zone of intact concrete rather than by the tensile zone. The shear capacity of the cross section was defined based on the material failure criteria of concrete: failure controlled by compression and failure controlled by tension. In the evaluation of the shear capacity, interaction with the normal stresses developed by the flexural moment in the cross section was considered. In the proposed strength model, the shear strength of the beam and the location of the critical section were determined at the intersection between the shear capacity and shear demand curves. The proposed strength model was verified by the comparisons to prior experimental results.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.63-66
• /
• 2003

1 km length of Bi-2223/Ag superconducting wires were fabricated by stacking, drawing process with advanced heat-treatment schedules. Intermediate annealing was carried out to increase the homogeneity and uniformity of the superconducting filaments embedded in the silver matrix. Phase modification from tetragonal to orthorhombic Bi-2212 by pre heat treatment(PHT) was executed to improve the texture and phase transformation of Bi-2223. Drawing stress was measured to Predict the sausaging and stress limit, Rolling parameters such as thickness, width and winding tension were investigated to roll the tape with uniformity. Critical current of 1 km length of superconducting tapes was measured about 50 A continuously after final sintering.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.277-284
• /
• 2003

One of important problem, in large space structure, is to overcome the self-weight of roof structure. This problem can be solved with using tension members effectively. Thus the rapid progress of hybrid structure, that makes effective use of the means of settling, has a good effect on realizing the large space. These systems of hybrid structure have the advantages of light weight and its own internal redundancy, but are occurred unstable phenomenon such as bifurcation or snap-through buckling, when the load level is come to the critical point. Among the hybrid structure, cable dome is shown the strong nonlinearity of unstable phenomenon in accordance with the external force. Therefore, the purpose of this study is to analyze and verify comparatively the unstable phenomenon of the Geiger and Flower type cable dome structures under axismmetric load.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.107-110
• /
• 2004

In this paper, a new structural health monitoring technique for composite laminates through the use of embedded fiber Bragg grating (FBG) sensors is presented. The method traces the ply stress states of a laminate and compares them with failure criteria during the service time of structures. The ply stress state of every ply composing the composite laminate can be obtained using classical lamination theory by embedded FBG sensors in the laminate. Graphite/epoxy laminate specimens, embedded with three FBG sensors, were fabricated. Tension tests were performed to evaluate the ply stress states tracing technique. Experimental results show that laminates experience fracture when the ply stress states are over the boundaries of failure criteria. In this method, critical damage can be detected by the ply stress states which are close to the boundaries of the failure criteria.