• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.462-467
• /
• 2005

Design standard specifications for structures applied to Seoul-Pusan High Speed Rail construction were established in 1991. Those specifications have been changed and supplemented in the process of above construction, and need to improve in accordance with the new criteria for construction works of Korean government. Also, a settlement of the criteria for prevention against disasters of Seoul-Pusan High Speed Rail is needed, and related specifications have been revised. The design criteria for Seoul-Pusan High Speed Rail are enacted with knowhow which resulted from High Speed Rail construction, and those are enacted for the purpose of establishing criteria for High Speed Rail construction in the inside and outside of Korea.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.209-212
• /
• 2007

It is increased electrical energy consumption with the development of intelligence society in buildings and thus an energy conservation through efficient use of electricity and reliability, safety, etc became more important. This research paper intensively investigated performance based construction specifications and design criteria of electrical installations in domestic and foreign country. It is necessary to analyze the key features based on performance and general trend about contractor guarantee, warranty method, performance design criteria from the investigated data. This paper shows a reasonable performance based construction specifications and design criteria of electrical installations.

• Proceedings of the Korean Reliability Society Conference
• /
• 2001.06a
• /
• pp.267-268
• /
• 2001

We consider some guidance on specifying required dependability characteristics in product and equipment specifications, together with specifications of procedures and criteria for verification.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.2
• /
• pp.397-407
• /
• 2017

This study investigated current status of rest area for drowsy drivers on the highways and drew the related issues to define specifications and design criteria regarding expressway rest area for drowsy drivers on the highways. Based on the investigation result, geometric structure specifications and improvement plans are suggested. The entry part of a rest area for drowsy drivers on the highways was divided into deceleration transition section, deceleration lane and entry connection road while the exit part was divided into exit connection road, acceleration lane and acceleration transition section. The optimum length was estimated by considering the main lane vehicle traveling speed, traveling speed at the beginning/end point of entry/exit connection roads, deceleration and acceleration. In addition, reasonable design criteria were suggested by dividing the parking section of rest area for drowsy drivers according to parking style and cross-section composition, and length of parking space and then considering the ratio of vehicles using rest area for drowsy drivers, the ratio of heavy vehicles, and the design speed within a rest area for drowsy drivers. It is believed that the suggested design criteria on rest area for drowsy drivers on the highways can be utilized in the future planning and maintenance of rest area for drowsy drivers. Additionally, the defined criteria on installing rest area for drowsy drivers on the highways will prevent traffic accidents in resting facilities and highways as well as improve usage and safety of them.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.1 s.53
• /
• pp.145-151
• /
• 2009

The span deflection among the monitoring items of bridge measurement system in real time is representative behaviour and important index of superstructure condition. the limit of span deflection in Standard Specifications for Highway Bridge in Korea has been applied to the method that is making the management-criteria for span deflection in bridge measurement system. But the limit concern mainly serviceability of divers. So it is difficult to find the safety factor of the limit from the viewpoint of bridge safety. This study estimated the safety factor of the limit of span-deflection in Standard Specifications for Highway Bridge in Korea from the viewpoint of bridge safety by the indoor structural test.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.2
• /
• pp.144-156
• /
• 2010

When existing parts are re-used for the development of a new product or business-to-business transactions, a method for searching parts from a part database that meets user's requirements is necessary. To this end, it is important to develop a part search method which is able to measure similarity between parts and user's input data with generality as well as robustness. In this paper, the authors suggest a method for measuring part similarity using ontology and multi-criteria decision making method and address its technical details. The proposed method ensures the interoperability with existing engineering information management systems, represents part specifications systematically, and has generality in the procedure for comparing part specifications. The case study for ejector pins having been conducted to demonstrate the proposed method is also discussed.

• Journal of the Korean Society of Costume
• /
• v.52 no.2
• /
• pp.59-70
• /
• 2002

For the purpose of providing basic data for the development of size specifications for middle-aged women in Busan, one dimensional measurements were made with the subjects. ranging 45 to 59 in age. The following are the conclusions : 1) According to ages, the middle and elder groups of the middle-aged women shared similar body types, having shorter height, more lowered bust. and increased upper-body depth and girth factors, compared with the earlier middle-aged women group. But the thigh girth of the elder middle-aged group (age: 55∼59) was the lowest, maybe owing to the aged lower-body muscles. 2) In the comparison with national averages. armhole girth, elbow girth, wrist girth. back waist length, side neck point-B.P.-waist line, and sleeve length showed great differences. This is problematic in that the national size standards fail to reflect each legion\`s peculiar body type characteristics. 3) Even though body types were classified according to drop value criteria suggested by KS specifications, 23.05% did not belong to the criteria. They were thus classified as A, N, and H body types, following the distribution of the present experiment. 4) In consideration of the economy factor of the production and sales of the clothes industry, the combinations of height and chest garth for the middle-aged Busan women were as follows: 155cm-85cm (Body Type A) 150cm-88cm (Body Type N), and 155cm-94cm (Body Type H).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.27-30
• /
• 2000

In this paper, we determine the design criteria of haptic device considering the human haptic system and determine the design specifications. We developed a new 2DOF haptic device based on the specifications. It has the wide workspace, statically-balanced, constant inertia matrix, well-conditioned Jacobian matrix and so on. There also is not singularity point within workspace of the device. We show that it has better performance than other 2DOF haptic device in the many aspects.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.8
• /
• pp.1028-1034
• /
• 2007

In order to establish a criteria of solid particle separation performance test on marine centrifugal purifier at factory acceptance test, an investigation had been done on criteria of test standards, regulations and test specifications of purifier manufactures. KS V 7836, fuel oil and lubricating oil purifiers for marine use-centrifugal type, the criteria of solid particle separation is studied in the point of reality, restricts and analysis method. It is proposed that a reasonable criteria and analysis method should be adopted, and the current criteria shall be revised to adequate levels considering reasonable basis and industrial technology levels. Also, the test analysis conceptions, separation efficiency method and particle size restriction method, are reviewed to fulfil separation performance test for marine centrifugal purifiers.

• English Language & Literature Teaching
• /
• v.16 no.4
• /
• pp.153-184
• /
• 2010

On the bases of the 5 principles and the 4 criteria for designing and developing of the listening and the reading test of National English Ability Test (NEAT), this study presents Item-Types Decision-Making Model as a blueprint for designing and constructing the two tests. It sets up the criteria for validating item types, designs a modular type of test specifications, constructs an item-types bank, and specifies a complementary type of test specifications of the two tests. To gather all these threads up, it constructs Item-Types Decision-Making Model which consists of such components as the item-type pool, the validity criteria and the procedures of testing item types, the item-types bank, the modular and the complementary type test specification. Thus, it shows how the Model works in developing and constructing the two level-differentiated listening and reading tests (the 2nd and the 3rd rank) of NEAT. Finally, it discusses some implications and applications of the Model to the two level-differentiated tests (the A and the B type) of 2014 CSAT (College Scholastic Ability Test) systems, National Assessment of Educational Achievement (NAEA), and classroom testing. In conclusion, Item-Types Decision-Making Model functions as a testing template in an item development system and as a matrix in an item-types bank system.