• Journal of Energy Engineering
• /
• v.20 no.1
• /
• pp.36-43
• /
• 2011

Plant biomass has been proposed as an alternative source of petroleum-based chemical compounds. Especially, aromatic chemical compounds can be obtained from lignin by depolymerization processes because the lignin consist of complex aromatic materials. In this study, kraft lignin, the largest emitted substance among several kinds of lignin in Korea, was used as a starting material and was characterized by solid-state $^{13}C$-Muclear Magnetic Resonance($^{13}C$-NMR), Fourier Transform Infrared Spectroscopy(FT-IR), Elemental Analysis(EA). The depolymerization of kraft lignin was studied at water-phenol mixture solvent in near critical region and the experiments were conducted using a batch type reactor. The effects of water-to-phenol ratio and reaction temperature($300-400^{\circ}C$) were investigated to determine the optimum operating conditions. Additionally, the effects of formic acid as a hydrogen-donor solvent instead of $H_2$ gas were examined. The chemical species and quantities in the liquid products were analyzed using gas chromatography-mass spectroscopy(GC-MS), and solid residues(char) were analyzed using FT-IR. GC-MS analysis confirmed that the aromatic chemicals such as anisole, o-cresol(2-methylphenol), p-cresol(4-methylphenol), 2-ethylphenol, 4-ethylphenol, dibenzofuran, 3-methyl cabazole and xanthene were produced when phenol was added in the water as a co-solvent.

• Microbiology and Biotechnology Letters
• /
• v.17 no.3
• /
• pp.236-240
• /
• 1989

The isolated bacterial strain 1K1 able to grow on extremely high concentration of toluene was morphologically and physiologically best described as Pseudomonas putida. This strain could grow on at least eight aromatic compounds, e.g., benzene, benzoate, phenol, o-cresol, m-cresol, toluene, m-tolunte, and xylene, but did not Brow on alkanes, such as hexane, octane, decane, and cyclohexane. Strain 1K1 could grow on above 95% toluene, but it could not grow on above 1% of other aromatic compounds. In the point of survival, strain 1K1 was resistant to high concentration of alkanes, appreciably resistant to toluene and xylene, and damaged by to other aromatic compounds. Strain 1K1 which grew on high concentration of toluene had irregular cell shape in comparing with normal cell shape of the genus Pseudomonas. Strain 1K1 was shown to have at least two aromatic compound dissimilation pathway, one for benzoate and the other for toluene.

• Applied Biological Chemistry
• /
• v.39 no.6
• /
• pp.472-476
• /
• 1996

The major portions of two DNA fragments, one from degradative plasmid, pRA4000 from Pseudomonas putida NCIMB 9866, and the other from degradative plasmid, pRA500 from P. putida NCIMB 9869, which harbor the structural genes for the flavoprotein (pchF) and cytochrome (pchC) subunits of p-cresol methylhydroxylase (PCMH), have been sequenced. The DNA and deduced amino acid sequences for pchC and pchF have been published. In these fragments, a coding region (dhal) for an aldehyde dehydrogenase has been identified. It is proposed that this gene encodes for the aldehyde dehydrogenase which converts p-hydroxybenzyaldehyde to p-hydroxybenzoate. p-Hydroxybezealdehyde is the product of oxidation of p-cresol by PCMH. The fragment from P. putida 9869 also harbors the genes for the ${\alpha}$ (pcaG) and ${\beta}$ (pcaH) subunits of protocatechuate 3,4-dioxigenase. The fragment from 9866 does not have any portion of these genes in the corresponding region A possible open reading frame (ORF) between pchC and pchF is seen for both clones, and a second putative open reading frame (ORF') also exists in the 9866 clone. The gene organizations are dhal-pchC-ORF-pchF-pcaGH for the DNA fragment from 9869, and ORF-dhal-pchC-ORF-pchF for the DNA fragment from 9866.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.175-175
• /
• 2016

Sn도금액은 강산에서는 $Sn^{2+}$, 강알칼리에서는 $Sn^{4+}$석출이 안정하다. 중성영역은 도금액에 $Sn^{2+}$침전을 방지하기 위하여 착화제가 필요하다. 기록에 남아 있는 가장 오래된 Sn도금은 1856년 Gore가 4가의 주석산염을 사용한 알칼리성용액이다. 그 후 50~60년 사이에 2가의 염화주석($SnCl_2$)과 KOH에 Cyan 등의 착화제를 첨가한 도금액이 발표되었다. 최초의 실용적인 알칼리주석용액은 1931년 Oplinger의 4가 주석산 염으로서, $CH_3COONa$를 완충제로 사용하였고, $Sn^{2+}$을 산화시키기 위하여 과산화물이나 과 붕산염을 첨가하였다. 알칼리성 Sn용액은 Natrium용액과 Kalium용액이 있지만, Kalium염이 용해성이 좋고, Sn농도를 높여 전류밀도를 높일 수 있다. 알칼리성용액은 도금속도가 산성용액의 1/2로 되고, 음극효율도 80~90% 정도 낮아, 두꺼운 피막이나 생산성을 중시하는 부품에는 적합하지 않다. 초기의 산성용액은 Sn의 정련목적으로 사용되었고, Pb정련에 사용된 Fluor규산용액에 Gelatine을 첨가하였다. Mathers는 Cresol산을 첨가하여 미량의 Cresol포화용액을 사용하여 고속으로 두껍게 석출시킬 수 있었다. 독일의 Schloetter도 다양한 방향족 술폰산으로써 반 광택피막을 실현하였다. 산성Sn도금액은 첨가제에 어떠한 유기화합물을 사용하는가는 도금장치나 석출상태로써 결정할 수 있다. Hothersall과 Bradshaw는 Cresol술폰산을 첨가하여 도금액 안정성 향상을 발견했다. Cresol술폰산은 $Sn^{2+}$의 안정제이며, Gelatine은 분산제기능을 한다. 붕 불화용액은 Sn농도를 높일 수 있고, $2{\sim}12A/dm^2$의 고 전류밀도의 도금이 가능하다. 1937년 Schloetter가 개발하여 미국의 제철회사에서 사용되었다. Sn-Ni도금은 Ni도금보다도 뛰어난 내식성이 있기 때문에 자전거, 자동차부품에 사용되고 있다. 실용도금액은 1951년 Parkinson이 발표한 HBF/HCL용액이다. $SnCl_2$산성용액에서 표준전위는 -0.136V인데 비하여, Ni이온의 표준전위는 -0.25V이다. HF용액에서는 불화물이온이 $Sn^{2+}$의 석출전위를 (-)방향으로 이동시켜서 합금석출이 가능하다. Sn-Co도금은 Cr도금의 색조에 가깝고, 장식목적으로 사용된다. Cr도금 대체용으로 사용된다. 내마모성이나 내식성은 Cr도금보다도 떨어지기 때문에 장식목적에 한정된다. 1953년 Parkinson은 Sn-Ni도금연구에서 동일한 용액조성으로부터 Co 30%를 석출시켰다. Sn-Zn도금은 방식도금으로서 자동차부품에 많이 사용되고 있다. Sn과 Zn의 표준전위는 서로 멀리 떨어져 있기 때문에 산성용액에서는 공석될 수 없다. 1980년대에 들면서, 방식Cd(Cadmium)도금의 독성 때문에 Sn-Zn도금을 재인식 하게 되었다. 1957년 Vaid 등이 No Cyan도금액을 발표했다. 그 후 러시아의 연구자가 안정한 도금액을 연구하였고, Srivastava와 Muckergee가 1976년에 종합하였다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.2
• /
• pp.251-256
• /
• 2002

Fresh bamboo (Phyllostachys bambuoides sieb. et zucc.) was charred at the mechanical steel kiln and traditional earth kiln with subsequent condensation of its smoke to 10$0^{\circ}C$. It was settled down for 12 months to remove tar components and then the middle layer of the liquid was collected as a bamboo smoke distillates to analyze its chemical composition and physicochemical characteristics for use as food additives or processing aids. The gravity, transmittance, reflectivity, and viscosity were 1.008, 89.05%, 1.36%, and 12.48 cp in the bamboo smoke distillates processed by mechanical steel kiln (MBSD) and 1.012, 98.33%, 1.34% and 9.05 cp in the bamboo smoke distillates by traditional earth kiln (TBSD), respectively. The color of TSBD was brighter than that of MBSD. The pH and titratable acidity, tar and remains were 3.55 and 2.830%, 2.803% and 0.671%, respectively, in the MBSD and 2.93 and 3.470%, 0.051% and 0.004%, respectively, in the TBSD. The major phenolic compounds of bamboo smoke distillates (BSD) were phenol, Ο-cresol, p-cresol, and guaiacol and the major organic acids were acetic acid, propionic acid, iso-butyric acid, and n-butyric acid, and major alcohols were methanol, furfuryl alcohol, and maltol. The contents of phenolic compound and alcohol were more in MBSD than in TBSD whereas the content of organic acid was more in TBSD than in MBSD. Therefore, toxic compounds for the human body, such as methanol from BSD should be removed for use as a food ingredient in the future.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 1997.04a
• /
• pp.55-57
• /
• 1997

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.251.2-251.2
• /
• 2010

Plant biomass has been proposed to be an alternative source for petroleum-based chemical compounds. Especially, phenolic chemical compounds can be obtained from lignin by chemical depolymerization processes because lignin consists of complex aromatic polymer such as trans-p-coumaryl, coniferyl and sinapyl alcohols, etc. Phenolic chemical compounds from lignin were usually produced in super critical water. However, we applied Near-critical water (NCW) system because NCW is known as a good solvent for lignin depolymerization. Organic matter like lignin can be solved in NCW system and the system has a unique acid-base property without conventional non-eco-friendly chemicals such as sulfuric acid and sodium hydroxide. In this work, we tried to optimize the NCW depolymerization system by adjusting the processing variables such as reaction time, temperature and pressure. Moreover, the amount of additional phenol was optimized by changing the molar ratio between water and phenol. Phenol was used as capping agent to prevent re-polymerization of active fragment such as formaldehyde. Alkali-lignin was used as a starting material and characterized by a Solid State 13C-NMR, FT-IR and EA (Elemental Analysis). GC-MS analysis confirmed that o-cresol, p-cresol, anisole and 4-hydroxyphathalic acid were the main product and they were quantitatively analyzed by HPLC.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.979-984
• /
• 1998

The conducting composites were prepared by blending of polyaniline(PANI) as conducting polymer and nylon6,6 as matrix in m-cresol. The PANI was protonated with alkylbenzenesulfonic acid such as camphorsulfonic acid(CSA) or dodecylbenzenesulfonic acid(DBSA). The miscibility of the composites was improved and the electrical conductivity was increased by adding dioctylphthalate(DOP). The electrical conductivity of the composites depending on the amount of protonating agent and PANI complex and the morphology were investigated. When it was protonated with DBSA having long alkyl chain and the content of PANI complex was 25 wt%, the electrical conductivity of the compsosite was increased up to 1.02 S/cm.

• Journal of the Korean Applied Science and Technology
• /
• v.13 no.3
• /
• pp.145-153
• /
• 1996

Naphthoquinone-1,2-diazide-5-sulfonyl[NDAS] derivatives members of quinone diazide compound that are utilizable as photosensitive polymer material were synthesized, and photoresist were prepared by mixing these derivatives with m-cresol novolak(a matrix resin) at various weight ratios. Photosensitive characteristics of photoresist were studied by examining UV and IR, relative sensitivity using a Gray scale method, and SEM to analyze if they can be used as photosensitive material in printing process. Experimental results showed that, by UV, NDAS derivatives were photoconverted and developer-soluble photoresist were produced. The mixing ratio of 1:4(by mass) of NDAS+p-ydroxybenzophenone+sensitizer and m-cresol novolak gave rise to the highest dissolution rate. In addition, photoresist obtained at this condition resulted in the most superior sensitivity and contrast.

• Journal of Sensor Science and Technology
• /
• v.26 no.6
• /
• pp.414-419
• /
• 2017

The optical characteristics of cresol red, phenol red, and neutral red immobilized in the thin film were investigated with absorbance measurement in order to find a sensing part of a fiber-optic pH sensor. Sol-Gel method with tetramethyl orthosilicate as a precursor was used to immobilize the pH indicators in the thin film. The absorbance spectra were measured when pH indicators were immobilized in the film and were dissolved in the buffer solution. Experimental results showed that the absorbance spectra could be changed when the pH indicator is immobilized in the thin film. As compared with other pH indicators, the neutral red exhibited similar absorbance spectra regardless of physical conditions and was sensitive over whole pH range between 4 and 11. In addition, the absorbance ratio of base peak to acid peak tended to increase in proportion to the increase in pH. Experimental results indicate that the neutral red is a good pH indicator for fabrication of a sensing part of the fiber-optic pH sensor.