• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.179-180
• /
• 2016

This study has a purpose of producing precast concrete for rapid construction of urban railway system. However, previous precast concrete has problem of its weight itself and there has been a keen interest in effect of carbon emission reduction and eco-friendly in our society. Therefore, in order to solve these two problems, we are about to produce precast concrete using lightweight aggregate and eco-lightweight concrete, with which much mineral had been replaced. As a result, we could confirm that it was possible to produce RMC B/P production satisfying the requirement performance of eco-lightweight concrete, which is replaced with a great amount of mineral for reduction of precast concrete's weight and environmental performance. Also, by confirming the possibility of producing precast concrete which lightweight concrete is used, if producing precast concrete by using eco-lightweight concrete, it would be effective to avoid destruction of environment and much useful to use multiple tower crane when constructing. Afterward, we will proceed our study by constructing precast concrete at which eco-lightweight concrete is used for continuous quality improvement.

• Industrial Engineering and Management Systems
• /
• 제15권1호
• /
• pp.19-31
• /
• 2016

A design method of the network for automated transporters mounted on rails is addressed for automated container terminals. In the network design, the flow directions of some path segments as well as routes of transporters for each flow requirement must be determined, while the total transportation and waiting times are minimized. This study considers, for the design of the network, the waiting times of the transporters during the travel on path segments, intersections, transfer points below the quay crane (QC), and transfer points at the storage yard. An algorithm, which is the combination of a modified Dijkstra's algorithm for finding the shortest time path and a queuing theory for calculating the waiting times during the travel, is proposed. The proposed algorithm can solve the problem in a short time, which can be used in practice. Numerical experiments showed that the proposed algorithm gives solutions better than several simple rules. It was also shown that the proposed algorithm provides satisfactory solutions in a reasonable time with only average 7.22% gap in its travel time from those by a genetic algorithm which needs too long computational time. The performance of the algorithm is tested and analyzed for various parameters.

• 한국항만경제학회지
• /
• 제18권2호
• /
• pp.109-133
• /
• 2002

The China entered World Trade Oganization(WTO) last year, thus opening its border to more - and freer - trade. With its foreign trade rapidly expanding and with economic growth continuing at a substantial -rate, China will be the largest container traffic generating country in the world. In the light of this potential trade bonanza, regional ports in North-East Asia strive to gain a competitive-edge. The Port of Busan, the world's third largest container port, wants to capture a significant share of the china's container cargoes. In this circumstance, development strategies of the Port of Busan are suggested as follows. First, to cope with increasing volumes, the New Busan Port on Gaduk island should be constructed without failure. Second, it is necessary to add modernized high-performance gantry cranes and to train crane operators' skill. Third, it needs to apply Dwell Time- Sliding Scale System for transshipment cargoes. Fourth, it needs to develop the EDI network in terminal areas or adjacent hub ports to exchange trustworthy and satisfactory informations Fifth, port authority -needs to enlarge designated Free Trade Zone to facilitate the free flow of cargoes. Sixth, the restoration of rail links between North and South Korea is abundantly clear. Thus it needs to enlarge railroad facilities in advance. Seventh, it needs to establish the Port Authority of Busan immediately. Finally, it needs to strengthen port sales and to open events like 'Marine Week 2001' regularly to attract potential canters or big shippers.

• 한국컴퓨터정보학회논문지
• /
• 제24권3호
• /
• pp.135-141
• /
• 2019

The purpose of this study was to analyze the direct measurement data of 20-25 years male university students of 7th Size Korea data and to characterize and to type the body shape of lower body. It was to provide basic data for male university students' pants pattern production. The lower body part consisted of the 'horizontal factor' of the lower body composed of circumference, thickness, width, and 'vertical factor' of the lower body composed of the length and height. This was consistent with the analysis of the body shape factor of the lower half of male adolescents. The lower body shape was classified into four types. Type 1 was thick and relatively long in the lower body and was named 'thick long leg'. Type 2 was named 'short bird legs' because the lower body was thin and relatively short. Type 3 was relatively thin and long, so the lower body was named 'long crane leg'. In Type 4, the lower body was relatively thick and short, which means 'short pillar leg'. In the case of 20-25 year-old male university students, they have different body shapes depending on the girth and length of the lower half of their body as they have reached adulthood. Therefore, it would be necessary to provide a sales system that allows the repair of the length of the pants to be facilitated, and the length of the pants to be repaired when the pants are selected according to the circumference. Future studies will need to classify the body shape according to angle and flatness.

• Nuclear Engineering and Technology
• /
• 제53권4호
• /
• pp.1378-1389
• /
• 2021

TRIUMF, Canada's particle accelerator centre, is constructing a new high-power ISOL (Isotope Separation On-Line) facility called ARIEL (Advanced Rare IsotopE Laboratory). Thick porous targets will be bombarded with up to 48 kW of 480 MeV protons from TRIUMF's cyclotron, or up to 100 kW of 30 MeV electrons from a new e-linac, to produce short-lived radioisotopes for a variety of applications, including nuclear astrophysics, fundamental nuclear structure and nuclear medicine. For efficient release of radioisotopes, the targets are heated to temperatures approaching 2000 ℃, and are exposed to GSv/h level radiation fields resulting from intended fissions and spallations. Due to these conditions, the operational life for each target is only about five weeks, calling for frequent remote target exchanges to limit downtime. A few days after irradiation, the targets have a residual radiation field producing a dose rate on the order of 10 Sv/h at 1 m, requiring several years of decay prior to shipment to a national disposal facility. TRIUMF is installing new remote handling infrastructure dedicated to ARIEL, including hot cells and a remote handling crane. The system design applies learnings from multiple existing facilities, including CERN-ISOLDE, GANIL-SPIRAL II as well as TRIUMF's ISAC (Isotope Separator and ACcelerator).

• 한국초전도ㆍ저온공학회논문지
• /
• 제23권4호
• /
• pp.35-38
• /
• 2021

Conventional direct current (DC) rotating machines are usually used for crane and press machine using high torque in metal and steel industries, because of a constant output power along variable rotating speed. A general DC motor with permanent field magnets could not increase a magnetic flux density at a gap between armature coils and field magnets. However, a superconducting DC motor has field magnets composed with high temperature superconducting (HTS) coils and it could increase the magnetic flux density at the gap to over 10 times than those of a general DC motor by control the excitation current into HTS coils. The superconducting DC motor could be operated with extremely high torque and constant output power at a low rotational speed. In this paper, a 500 W superconducting DC rotating machine was conceptually designed with a LN₂ (Liquid Nitrogen) cooling method and the operation characteristics results of HTS field magnets were presented. The two no-insulation HTS magnets for a 500 W superconducting DC rotating machine were fabricated. The excitation current for the HTS magnets could be controlled from 0 to 40 A. This test results will be available to design large-sized HTS magnets for a number of hundred kW class superconducting DC rotating machine under LN₂ cooling system.

• 국제학술발표논문집
• /
• The 7th International Conference on Construction Engineering and Project Management Summit Forum on Sustainable Construction and Management
• /
• pp.42-51
• /
• 2017

Due to the high degree of mechanization and the good environmental benefits, the prefabricated buildings are being promoted in China. The construction site layout of the prefabricated buildings has important influence on its safety benefit. However, few scholars have studied the safety problem on it. Firstly, in order to give a follow-up study foreshadowing the characteristics of prefabricated buildings are analyzed, the research assumptions are given and three types of safety buffers are established. And then a mult-objective model for the prefabricated buildings site layout is presented: taking into account the limits of noise, the coverage of the tower crane and the possibility of exceeding boundaries and overlapping, the constraints are and designed established respectively; Based on the improved System Layout Planning (SLP) method, the efficiency\cost\safety interaction matrices among the facilities are also founded for objective function. For the sake of convenience, a hypothetical facility layout case of the prefabricated building is used, the optimal solution of that is obtained in MATLAB with particle swarm algorithm (PSO), which proves the effectiveness of the model presented in this paper.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 추계학술대회
• /
• pp.311-316
• /
• 2004

LMTT는 항만 자동화를 위한 수평 이송이 가능하도록 설계된 셔틀카(shuttle car)와 격자구조의 레인에 부착된 스테이터 모듈 (stator module)로 구성된 PMLSM(Permanent Magnetic Linear Synchronous Motor)에 의해 구동된다 본 논문에서는 강도기준을 고려하고 경량화 설계를 위하여 셸(shell) 요소로 유한요소 모델링된 이동체(mover)의 구조최적설계를 수행하였다. 설계변수로는 가로 빔, 세로 빔, 휠 빔의 두께와 높이 방향의 치수를 결정하는 형상 변수를 포함시켰다. 목적함수로는 중량, 제한조건 함수로는 안전율이 고려된 응력으로 실정하였다.

• International Journal of Automotive Technology
• /
• 제7권1호
• /
• pp.83-90
• /
• 2006

The purpose of this paper is to describe the design and implementation of an unmanned ground vehicle, called the TailGator at CIMAR (Center for Intelligent Machines and Robotics) of the University of Florida. The TailGator is a gas powered, four-wheeled vehicle that was designed for the AUVSI Intelligent Ground Vehicle Competition and has been tested in the contest for 2 years. The vehicle control model and design of the sensory systems are described. The competition is comprised of two events called the Autonomous Challenge and the Navigation Challenge: For the autonomous challenge, line following, obstacle avoidance, and detection are required. Line following is accomplished with a camera system. Obstacle avoidance and detection are accomplished with a laser scanner. For the navigation challenge, waypoint following and obstacle detection are required. The waypoint navigation is implemented with a global positioning system. The TailGator has provided an educational test bed for not only the contest requirements but also other studies in developing artificial intelligence algorithms such as adaptive control, creative control, automatic calibration, and internet-base control. The significance of this effort is in helping engineering and technology students understand the transition from theory to practice.

• 정보처리학회논문지A
• /
• 제10A권5호
• /
• pp.519-528
• /
• 2003

컨테이너 터미널에서느 매일 24시간, 365일 운영하는 데에 있어서 다양한 의사결정을 필요로 하며, 이 모든 의사결정들은 상호 관계를 가지게 된다. 이러한 의사결정의 궁극적인 목표는 선박 작업시간, 작업 처리를 위해 사용되는 자원들, 터미널 내부 도로의 혼잡도 등을 최소화하는 것이다. 또한 필요한 저장 공간을 효율적으로 이용하는 것이다. 따라서 컨테이너 터미널의 운용 효율을 더 한층 강화하기 위해서는 이러한 의사결정의 범위와 복잡성이 더해지게 되어 의사결정 도구의 필요성이 강조될 수 밖에 없다. 이 논문은 이러한 목적을 위해 의사결정시스템을 위한 평가요소들을 도출하고, 의사결정시스템 설계에 가장 큰 영향을 주는 평가요소, 즉 야드장치장 배경, RTGC 배정, QC당 YT 배정의 최적화 전략을 제안한다. 그리고 G2 언어를 상요한 시뮬레이션에 의해 의사결정시스템 설계의 효율성을 선박작업시간 비교를 통하여 평가한다.