• Journal of The Korean Society of Grassland and Forage Science
• /
• v.21 no.3
• /
• pp.123-128
• /
• 2001

This study was carried out to determine the effects of sowing methods after herbicide application on botanical composition, forage yield and chemical contents in the pasture dominated Hypochoeris radicata in Jeju area over two years. It was arranged as a randomized block design with five treatrnents(contro1: none, TI : herbicide application, T2 : herbicide application + oversowing, T3 : herbicide application + overdrilling, T4 : herbicide application + cultivation). In the pasture dominated Hypochoeris radicata, the herbicide (dicamba) treatments improved grass rate with orchardgrass and perennial ryegrass by 97%. The DM yield per ha were much higher(p<0.05) in T2(7,152kg), T3(7,608kg) and T4(8,010kg) than that of control. The chemical compositions of grass (% of DM basis) were not different among treatments, but the overdrilling and cultivation treatments tended to increase the forage crude protein(CP). These results indicate that oversowing or overdrilling after herbicide application can efficiently improve botanical compositions and forage productivity in the pasture dominated Hypochoeris radicata. (Key words : Herbicide, Sowing methods, Botanical composition, Forage production)

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.12
• /
• pp.1740-1744
• /
• 2017

This paper describes the preparation and characteristics of a battery capacitor and module for solar power system. A cylindrical 30,000F battery capacitor ($60{\times}138mm$) was assembled by using the $LTO(Li_4Ti_5O_{12})$ electrode as an anode and $NMC(LiNiMnCoO_2)-LCO(LiCoO_2)$ as a cathode. The battery capacitor has reduced energy density and power density under high CC(constant current) and CP(constant power) conditions. Battery capacitor module (16V, 11Ah) was fabricated using an asymmetric hybrid capacitor with a capacitance of 30,000F. In order to determine the characteristics of the battery capacitor Module for solar power system, battery capacitor cells were connected in series with active balancing circuit. As a result of measuring the 100w LED lamp, it was discharged at the voltage of 15V~10V, and the compensation time at discharge was measured to be about 4979s. Experimental results show that it can be applied to applications related to solar power system by applying battery capacitor module.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.30 no.1
• /
• pp.35-42
• /
• 2010

The study was conducted to investigate the effect of dietary energy and protein levels on milk production in Saanen (Capra hircus) dairy goats fed the diets with the different ratio of forage and concentrate. Four lactating goats in mid lactation ($57.5{\pm}10.8\;kg$ BW) were used in a $4{\times}4$ Latin square with 21-d periods. Animals were randomly allocated to one of the four groups; 10.59 MJ ME/kg and 11.90% CP (TJ), 10.14 MJ ME/kg and 12.73% CP (T2), 9.45 MJ ME/kg and 15.19% CP (T3), 8.75 MJ ME/kg and 16.60% CP DM (T4). Also ratio of forage to concentrate was 49: 51 (Tl), 59: 41 (T2), 74: 26 (T3) and 90: 10 (T4). Intakes of forage and concentrate were linearly increased (p<0.05) with their increasing energy levels in the diets. No significant differences were found in total dry matter intake and body weight between treatments. Milk yield in T3 was the highest among treatments (p<0.05). Relative to other treatments, T4 significantly (p

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.5
• /
• pp.642-653
• /
• 2006

Purpose : The purpose of this study was to investigate the effect of the output energy(voltage) of laser welding on the strength and properties of joint of cast titanium(CP Gr II) and titanium alloy(Ti-6Al-4V). Material and method : Cast titanium and its alloy rods(ISO6871) were prepared and perpendicularly cut at the center of the rod. After the cut halves were fixed in a jig, and the joints welded with a laser-welding machine at several levels of output voltage of $200V{\sim}280V$. Uncut specimens served as the non-welded control specimens The pulse duration and pulse spot size employed in this study were 10ms and 1.0mm respectively. Tensile testing was conducted at a crosshead speed of 0.5mm/min. The ultimate tensile strength(MPa) was recorded, and the data (n=6) were statistically analyzed by one-way analysis of variance(ANOVA) and Scheffe's test at ${\alpha}$=0.05. The fracture surface of specimens investigated by scanning electron microscope (SEM). Vickers microhardness was measured under 500g load of 15seconds with the optimal condition of output voltage 280V. Results : The results of this study were obtained as follows, 1. When the pulse duration and spot size were fixed at 10ms and 1.0mm respectively, increasing the output energy(voltage) increased UTS values and penetration depth of laser welded to titanium and titanium alloy. 2. For the commercial titanium grade II, ultimate tensile strength(665.3MPa) of the specimens laser-welded at voltage of 280V were not statistically(p>0.05) different from the non-welded control specimens (680.2MPa). 3. For the titanium alloy(Ti-6Al-4V), ultimate tensile strength(988.3MPa) of the specimens laser-welded at voltage of 280V were statistically(p<0.05) different from the non-welded control specimens (665.0MPa). 4. The commercial titanium grade II and titanium alloy(Ti-6Al-4V) were Vickers microhardness values were increased in the fusion zone and there were no significant differences in base metal, heat-affected zone.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.1
• /
• pp.1-19
• /
• 2003

The surface of metals should be as smooth as possible for optimum comfort, oral hygiene, low plaque retention, and resistance to corrosion. In this study five specimens of each precious metal(type III gold alloy, ceramic gold alloy, and Ag-Pd alloy) were divided into five groups according to finishing and polishing procedures : group 1(sandblaster), group 2(group 1+stone), group 3(group 2+brown rubber), group 4(group 3+green rubber), and group 5(group 4+rouge). Six specimens of each non-precious metal(Co-Cr alloy, Ni-Cr alloy, and Co-Cr-Ti alloy) were divided into six groups: group 1(sandblaster), group 2(group 1+hard stone), group 3(group 2+electrolytic polisher), group 4(group 3+brown hard rubber point), group 5(group 4+green hard rubber point), and group 6(group 5+rouge). Considering factors affecting the rate of abrasion, the same dentist applied each finishing and polishing procedure. In addition, the surface roughness of enamel, resin, and porcelain was evaluated. The effect of finishing and polishing procedures on surface roughness of precious and non-precious metals, enamel, resin, and porcelain was evaluated by means of Atomic Force Microscope(AutoProbe CP. Park Scientific Instruments, U.S.A.) that can image the three dimensional surface profile and measure average surface roughness values of each sample at the same time. The obtained results were as follows : 1. According to finishing and polishing procedures, the surface roughness of type III gold alloy, ceramic gold alloy, and Ag-Pd alloy was decreased in the order of group 1, 2, 3, 4, and 5 (P<0.01). 2. According to finishing and polishing procedures. the surface roughness of Co-Cr alloy, Ni-Cr alloy, and Co-Cr-Ti alloy was decreased in the order of group 1, 2, 3, 4, 5, and 6 (p<0.01). 3. There was not statistically significant difference in the surface roughness among three metals of precious metals in group 1 but was significant difference in group 2, 3, 4, and 5 (P<0.05). 4. There was not statistically significant difference in the surface roughness among three metals of non-precious metals in all groups. 5. When the surface roughness of the smoothest surface of each metal, enamel. porcelain, and resin was compared, porcelain was the smoothest and the surface roughness was decreased in the order of Ni-Cr alloy. Co-Cr alloy. Co-Cr-Ti alloy, resin. Ag-Pd alloy, ceramic gold alloy type III gold alloy, and enamel (P<0.01). The results of this study indicate that the finishing and polishing procedures should be carried out in a logical, systematic sequence of steps and the harder non-precious metals may be less resistance to abrasion than are the softer precious metals.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.1
• /
• pp.65-72
• /
• 2011

Purpose: The purpose of this study was to evaluate the level of electro-chemical corrosion and surface roughness change for the cases of Ti abutment connected to restoration made of base metal alloys. Materials and methods: It was hypothesized that Ni-Cr alloys in different compositions possess different corrosion resistances, and thus the specimens ($13{\times}13{\times}1.5\;mm$) in this study were fabricated with 3 different types of metal alloys, commonly used for metal ceramic restorations. The electrochemical characteristics were evaluated with potentiostat (Parstat 2273A) and the level of surface roughness change was observed with surface roughness tester. Paired t-test was used to compare mean average surface roughness (Ra) changes of each specimen group. Results: All specimens made of nickel-chromium based alloys, average surface roughness was increased significantly (P < .05). Among them, the Ni-Cr-Be alloy ($0.016{\pm}.007\;{\mu}m$) had the largest change of roughness followed by Ni-Cr ($0.012{\pm}.003\;{\mu}m$) and Ni-Cr-Ti ($0.012{\pm}.002\;{\mu}m$) alloy. There was no significant changes in surface roughness between each metal alloys after corrosion. Conclusion: In the case of galvanic couples of Ti in contact with all specimens made of nickel-chromium based alloys, average surface roughness was increased.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.82.1-82.1
• /
• 2012

란타늄 산화물 ($La_2O_3$) 박막은 하프늄 산화물 ($HfO_2$) 박막보다 높은 유전 상수와 높은 밴드 오프셋으로 인해 dynamic random access memory(DRAM)에서 유전체 재료로써 연구되어 왔다. 그리고 Lanthanum이 도핑된 HfO2이 더 높은 유전 상수와 낮은 누설 전류 밀도를 갖는 다는 사실이 이전에 보고 된 바 있다. 본 연구에서 우리는 ALD를 이용하여, TiN 하부 전극 위에 $La_2O_3$의 위치를 달리하는 $La_2O_3/HfO_2$의 나노 층상조직 구조(두께 10 nm)를 금속 - 절연체 - 금속 (MIM) 구조로 제작 하였다. ALD는 좋은 comformality와 넓은 지역 균일성을 가지며, 원자수준의 두께를 조절할 수 있다는 장점을 갖고 있다. 또한, 다양한 화학 물질들을 이용한 복합적 계층구조를 만들 수 있는 점과 $HfO_2$ 및 $La_2O_3$ 계층의 수직 위치를 정확하게 조절할 수 있는 점으로 본 연구에 적합한 증착 방법이다. HfO2 속에 $La_2O_3$ 층을 깊이에 따라 삽입함으로써 $HfO_2$ 계층에 La 도핑의 효과와 더불어 TiN 하부 전극 위의 $La_2O_3$과 $HfO_2$의 차이점을 확인 하였다. $HfO_2$은 $250^{\circ}C$에서 TDMAH와 물을 사용하여, $La_2O_3$은 동일한 온도에서 $La(iPrCp)_3$와 물을 사용하여 제작되었다. 화학적 구성 및 binding 구조는 X선 광전자 분광법 (XPS)을 통해 분석하였다. 전기적 특성(유전 상수 및 누설 전류)은 Capacitance-Voltage (CV)와 Current-Voltage (IV) 측정으로 확인하였다. 결과적으로, $La_2O_3$ 또는 $HfO_2$을 한 종류만 사용한 절연층의 전기적 특성보다, $La_2O_3/HfO_2$의 나노 층상조직 구조가 더 나은 특성 (누설 전류 밀도 : $5.5{\times}10^{-7}\;A/cm^2$ @-1MV/cm, EOT : 14.6)을 갖는다는 것을 확인했고, 더불어 $La_2O_3$의 흡습 성질로 인한 화학 구조와 전기적 특성의 일부 차이를 확인하였다. 본 연구에서는 $HfO_2$ 속에 $La_2O_3$층이 TiN 하부 전극 바로 위에 위치할 때, 즉, 공기 중에 노출되지 않은 $La_2O_3/HfO_2$ 구조에서 가장 좋은 특성의 MIM capacitor를 얻을 수 있었다.

• Macromolecular Research
• /
• v.15 no.5
• /
• pp.430-436
• /
• 2007

The dinuclear half-sandwich CGCs (constrained geometry catalyst) with a polymethylene bridge, $[Ti({\eta}^5 : {\eta}^1-indenyl)SiMe_2NCMe_3]_2(CH_2)_n]$[n = 6 (1) and 12 (2)], have been employed in the copolymerization of ethylene and norbornene (NBE). To compare the mononuclear metallocene catalysts; $Ti({\eta}^5 : {\eta}^1-2-hexylindenyl)SiMe_2NCMe_3$ (3), $(Cp^* SiMe_2NCMe_3)$Ti (Dow CGC) (4) and ansa-$Et(Ind)_2ZrCI_2$ (5), were also studied for the copolymerization of ethylene and NBE. It was found that the activity increased in the order: 1 < 2 < 3 < 5 < 4, indicating that the presence of the bridge between two the CGC units contributed to depressing the polymerization activity of the CGCs. This result strongly suggests that the implication of steric disturbance due to the presence of the bridge may playa significant role in slowing the activity. Dinuclear CGCs have been found to be very efficient for the incorporation of NBE onto the polyethylene backbone. The NBE contents in the copolymers formed ranged from 10 to 42%, depending on the polymerization conditions. Strong chemical shifts were observed at ${\delta}$42.0 and 47.8 of the isotactic alternating NBE sequences, NENEN, in the copolymers with high NBE contents. In addition, a resonance at 47.1 ppm for the sequences of the isolated NBE, EENEE, was observed in the $^{13}C-NMR$ spectra of the copolymers with low NBE contents. The absence of signals for isotactic dyad at 48.1 and 49.1 ppm illustrated there were no isotactic or microblock (NBE-NBE) sequences in the copolymers. This result indicated that the dinuclear CGCs were effective for making randomly distributed ethylene-NBE copolymers.

• The Journal of the Petrological Society of Korea
• /
• v.10 no.3
• /
• pp.157-171
• /
• 2001

This study investigated the effects of Pb/Tl ratio, Pb concentration and concomitant matrix elements on the measurement of Pb isotope ratios using multi-collector ICP/MS (AXIOM MC model). Accuracy and reproducibility of Pb isotope ratios in NBS 981 solution were estimated for 42 data measured from March to August 2001. Pb isotopes measured in rocks, bronzes and sediments were compared to data measured by TIMS. Reproducibilities for $^{206}Pb/^{204}Pb,\; ^{207}Pb/^{204}Pb,\;and\;^{208}Pb/^{204}Pb$ ratio were about 500 ppm (2sd) and for $^{207}Pb/^{206}Pb$\;and\;^{208}Pb/^{206}Pb$ were 100~200 ppm for 200 ng of Pb in NBS 981 solution. The optimum conditions for the analysis of Pb isotope ratios with AXIOM MC for best accuracy and reproducibility were defined as follows; 1) Pb/Tl ratio is about 10 2) Pb concentration is about 100 ng/ml 3) correction for mass discrimination is performed by exponential law using 2.3887 of $^{205}Tl/^{203}Tl$ and Pb mass fractionation factor empirically obtained from $ln(^{208}Pb/^{206}Pb)-ln(^{205}Tl/^{203}Tl)$ relationship. The sample data measured with MC/ICP/MS for acid-digested and chemically separated rock samples, and acid-digested bronze samples and sediment samples coincide with those of TIMS within analytical errors. Therefore, MC/ICP/MS is a rapid analytical technique for Pb isotope ratios with the similar precision compared with TIMS.

• Korean Journal of Veterinary Service
• /
• v.20 no.2
• /
• pp.143-150
• /
• 1997

Total viable cells and lactose non-fermenting cells were counted from animal feedstuffs (n=65). And isolation of Gram negative lactose nonfermenting enterobacteria and antibiotics susceptibility of isolates were performed. 1. The ranges of total viable cells / lactose non-fermenters in animal feedstuffs from Korean cattle were counted as 9$\times$$10^4$-1$\times$$10^7$ / 1$\times$$10^2$-6$\times$$10^3$, milking cow as 1$\times$$10^4$-2$\times$$10^8$ / 2$\times$$10^2$-8$\times$$10^3$, pig as 1$\times$$10^4$-1$\times$$10^6$ / 2$\times$$10^2$-6$\times$$10^3$, and chicken as 7$\times$$10^4$-1$\times$$10^9$ / 4$\times$$10^2$-1$\times$$10^5$ cfu/g, respectively. 2. Among the 214 isolates from feedstufs, 87 from Chinan(n=23), 66 from Changsu (n=23) and 61 from Mooju(n=19) were isolated. Of these isolates, 60 from pigs (n: 19), 51 from milking cows(n=15), 45 from chikens(n=11) and 58 from Korean cattle(20) were isolated. 3. Among the 6 genuses of Gram negative lactose nonfermenting enterobacili, Salmonella sp, Y pseudotuberculosis, Ent agglomerans and Sal choleraesuis were frequently encountered. 4. A majority of isolates were sensitive to 19 antibiotics, singly or in combination. These isolates were completely susceptible to Cp, Gm, Imp and Pi, 93% to Ak and To, 73% to Cax and Ts, 66% to Cft and Tim, 46-53% to Caz, Cf and Cz, 33-40% to Am, Azt, Cfz and Ti, and 6% to Cfx, in order, but not susceptible to Crm. 5. Among the antibiotic resistant strains, a total of 23 resistant patterns was noted, and of these Crm 40(18.7%), Am Cf Cfx Cfz Crm Ti 27(12.6%), each of Azt Ctx Crm and Azt Cax Caz Cft Cfx Crm 22(10.3% ) were frequently encountered.