• 한국공간정보시스템학회:학술대회논문집
• /
• 2004.05a
• /
• pp.75-82
• /
• 2004

Many researcher's efforts have made a significant advancement of space frame structure with various portion, and it becomes the most outsanding one of space structures. However, with the characteristics of thin and long term of spacing, the unstable behavior of space structure is shown by initial imperfection, erection procedure or joint, especially space frame structure represents more. This kind of unstable problem could not be set up clearly and there is a huge difference between theory and experiment. Moreover, the discrete structure such as space frame has more complex solution, this it is not easy to derive the formulation of design about space structure. In this space frame structure, the character of rise-span ratio or load mode is represented by the instability of space frame structure with initial imperfection, and snap-through or bifurcation might be the main phenomenon. Therefore, in this study, space frame structure which has a lot of aesthetic effect and profitable for large space covering single layer is dealt. And because that the unstable behavior due to variation of inner force resistance in the elastic range is very important collapse mechanism, I would like to investigate unstable character as a nonlinear behavior with a geometric nonlinear. In order to study the instability. I derive tangent stiffness matrix using finite element method and with displacement incremental method perform nonlinear analysis of unit space structure, star dome and 3-ring star dome considering rise-span $ratio(\mu}$ and load $ratio(R_L)$ for analyzing unstable phenomenon.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.58.2-58.2
• /
• 2015

We present a library of high spectral resolution (R ~ 40,000) and high signal-to-noise ratio (S/N ~ 200) near-infrared spectra of ~50 late-type stars. The spectra of late-type stars were obtained with Immersion GRating INfrared Spectrograph (IGRINS) covering the full H and K band. The stars are mainly from MK standard stars which have well-defined spectral types and luminosity classes and cover wide ranges of effective temperatures and surface gravities. The spectra are corrected for telluric absorption lines and absolutely flux calibrated using the Two Micron All Sky Survey (2MASS) photometry. In this work, we present the preliminary results of spectroscopic diagnostics for stellar physical parameters. Our ultimate goal is to provide a library of near-infrared spectra of standard stars, which covers all spectral types and luminosity classes, with a high spectral resolution and high signal-to-noise ratio.

• Journal of Powder Materials
• /
• v.10 no.6
• /
• pp.415-421
• /
• 2003

The study for producing the flake powders by milling of aluminum foil and gas atomized powders was carried out. The effects of lifter bars on the ball motions and milling of aluminum foils were also investigated. The aluminum foils were laminated each other, elongated, fragmented into small foils and finally formed into the flake powders during the dry ball-milling. The spherical atomized-powders were milled to coarse flake powders with high aspect ratio and then changed to fine flake powders with lower aspect ratio. Even though long times were required for making flake powders by milling of foils, the water covering areas of them were higher than those of powders milled using gas-atomized powders, suggesting aluminum foils were more plastically deformed by micro-forging. On the other hand, as the number of lifter bars increased, the necessary rotation speeds of milling jar for cascading mode and cataracting mode decreased drastically. It was possible to achieve same quality of milled flake powder by using the lifter bars under the lower milling speeds. The painting test showed that the appearance of painted surface was good and optimum content range of aluminum paste in car paint to maximize the degree of gloss was 3-5%.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.11
• /
• pp.1773-1777
• /
• 2006

We evaluated the usefulness of DNA microarray as a comparative genomics tool, and tested the validity of the cutoff values for defining absent genes in test genomes. Three genome-sequenced E. coli strains (K-12, EDL933, and CFT073) were subjected to comparative genomic hybridization with DNA microarrays covering almost all ORFs of the reference strain K-12, and the microarray results were compared with the results obtained from in silico analyses of genome sequences. For defining the K-12 ORFs absent in test genomes (reference strain-specific ORFs), we applied and evaluated the cutoff level of -1. The average sequence similarity between ORFs, to which corresponding spots showed a log-ratio of>-1, was $96.9{\pm}4.8$. The numbers of spots showing a log-ratio of <-1 (P<0.05, t-test) were 90 (2.5%) and 417 (10.6%) for the EDL933 genome and the CFT073 genome, respectively. Frequency of false negatives (FN) was ca. 0.2, and the cutoff level of -1.3 was required to achieve the FN of 0.1. The average sequence similarity of the false negative ORFs was $77.8{\pm}14.8$, indicating that the majority of the false negatives were caused by highly divergent genes. We concluded that the microarray is useful for identifying missing or divergent ORFs in closely related prokaryotic genomes.

• Advances in Computational Design
• /
• v.3 no.1
• /
• pp.71-86
• /
• 2018

Thin-walled cross-sections can be optimized to enhance their resistance and progress their behaviour, leading to more competent and inexpensive structural system. The aim of this study is to afford a methodology that would facilitate progress of optimized cold formed steel (CFS) column section with maximum ultimate strength for practical applications. The proposed sections are designed to comply with the geometrical standards of pre-qualified column standards for CFS structures as well as with the number of industrialized and practical constraints. The stiffening evaluation process of CFS lipped channel columns, a five different cross section are considered. The experimental strength and behaviour of the proposed sections are verified by using the finite element analysis (FEA). A series comprehensive parametric study is carried out covering a wide range of section slenderness and overall slenderness ratio of the CFS column with and without intermediate web stiffeners. The ultimate strength of the sections is determined based on the Direct Strength Specification and other design equation available from the literature for CFS structures. A modified design method is proposed for the DSM specification. The results indicate that the CFS column with complex edge and intermediate web stiffeners provides an ultimate strength which is up to 78% higher than standard optimized shapes with the same amount of cross sectional area.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.509-509
• /
• 2011

Superhydrophobic surfaces on alloyed steels were fabricated with a non-conventional method of plasma etching and subsequent water immersion procedure. High aspect ratio nanopatterns of nanoflake or nano-needle were created on the steels with various Cr content in its composition. With CF4 plasma treatment in radio-frequence chemical vapor deposition (r.-f. CVD) method, steel surfaces were etched and fluorinated by CF4 plasma, which induced the nanopattern evolution through the water immersion process. It was found that fluorine ion played a role as a catalyst to form nanopatterns in water elucidated with XPS and TEM analysis. The hierarchical patterns in micro- and nano scale leads to superhydrophobic properties on the surfaces by deposition of a hydrophobic coating with a-C:H:Si:O film deposited with a gas precursor of hexamethlydisiloxane (HMDSO) with its lower surface energy of 24.2 mN/m, similar to that of curticular wax covering lotus surfaces. Since this method is based on plasma dry etching & coating, precise patterning of surface texturing would be potential on steel or metal surfaces. Patterned hydrophobic steel surfaces were demonstrated by mimicking the Robinia pseudoacacia or acacia leaf, on which water was collected from the humid air using a patterned hydrophobicity on the steels. It is expected that this facile, non-toxic and fast technique would accelerate the large-scale production of superhydrophobic engineering materials with industrial applications.

• Structural Engineering and Mechanics
• /
• v.90 no.3
• /
• pp.273-285
• /
• 2024

Tapered girders emerged as an economical remedy for the challenges associated with constructing long-span buildings. From an economic standpoint, these systems offer significant advantages, such as wide spans, quick assembly, and convenient access to utilities between the beam's shallow sections and the ceiling below. Elastic-local buckling is among the various failure modes that structural designers must account for during the design process. Despite decades of study, there remains a demand for efficient and comprehensive procedures to streamline product design. One of the most pressing requirements is a better understanding of the tapered web plate girder's local buckling behavior. This paper conducts a comprehensive numerical analysis to estimate the critical buckling coefficient for simply supported tapered steel web plates, considering loading conditions involving compression and bending stresses. An eigenvalue analysis was carried out to determine the natural frequencies and corresponding mode shapes of tapered web plates with varying geometric parameters. Additionally, the study highlights the relative significance of various parameters affecting the local buckling phenomenon, including the tapering ratio of the panel, normalized plate length, and ratio of minimum to maximum compressive stresses. The regression analysis and optimization techniques were performed using MATLAB software for the results of the finite element models to propose a separate formula for each load case and a unified formula covering different compression and bending cases of the elastic local buckling coefficient. The results indicate that the proposed formulas are applicable for estimating the critical buckling coefficient for simply supported tapered steel web plates.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.12
• /
• pp.7613-7619
• /
• 2013

Background and Aims: Helicobacter pylori infection may be associated with an increased risk of colorectal carcinoma. However, as most studies on this subject were relatively small in size and differed at least partially in their designs, their results remain controversial. In this study, we aimed to carry out a meta-analysis to evaluate the potential association of H. pylori infection with colorectal adenoma and adenocarcinoma risk, covering all of the different testing methods. Methods: We conducted a search in PubMed, Medline, EBSCO, High Wire Press, OVID, and EMBASE covering all published papers up to March 2013. According to the established inclusion criteria, essential data were then extracted from the included studies and further analyzed by a systematic meta-analysis. Odds ratios were employed to evaluate the relationship between H. pylori infection and the risk of colorectal neoplasms. Results: Twenty-two studies were included, and the odds ratio for the association between H. pylori infection and colorectal cancer was 1.49 (95% confidence interval 1.30-1.72). No statistically significant heterogeneity was observed. Publication bias was ruled out. Conclusion: The pooled data suggest H. pylori infection indeed increases the risk of colorectal adenoma and adenocarcinoma.

• Journal of Environmental Health Sciences
• /
• v.9 no.2
• /
• pp.55-65
• /
• 1983

This survey was carried out to investigate the pattern of taking psychotropic drugs for 618 cases who visited 48 drugstores located as such four types of areas as business sections, gay quarters, residential sections and quasi-industrial areas from May, 1982 to March, 1983. The results are summarized as follows: I. The age distribution: The age group of 20-29 showed the highest distribution covering 35.6% as 220 out of 618 cases. The age groups of thirties and forties covered 23.0% and 19.0% respectively. The sex ratio was estimated as 1:1.86. 2. The occupational distribution: The unemployees composed the largest portion covering 53.7% as 332 out of 618. Above all the class of the housewives was 32.7%. 3. The marital status: The degree of distribution was higher on the sides of the group of married people than that of single and its percentage was 30.1. 4. The educational level: Most of the people who purchased the drugs had no knowledge of the effect of the drugs, and they covered 80.9%. 5. As for the motives, the twenties took psychotropic drugs in order to relief insomnia and that was the biggest major motive at the portion of 59.1%, 130 out of 618. 6. The age group of twenties who took the drugs for about 6 months showed the highest percentage of 52.7%. 7. The highest distribution appeared in the case that takes one or two tablets a day for less than 6 months. 8. The dosage distribution by the number of times taking the drugs The group of people that took the drugs more than 3 to 4 tablets a day as the number of 1 to 3 times covered 41.7\ulcorner0 of 187. 9. The most favorite psychotropic drugs: Lorazepam was showed to be the most favorite drugs by either male or female covered 50.9o70, 54.2\ulcornero respectively. 10. The motives of selecting drugs: The optional motives of selecting psychotropic drugs were showed 269 (43.5%) out of 618 cases that chose the drugs for themselves.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.3
• /
• pp.55-62
• /
• 2010

This is an experimental research in order to judge the applicability of sewage sludge incineration ash having applied the mixing proportion needed to manufacture bricks and to do plaster work with addition of hwangtoh and slaked lime as a part of the methods for utilizing the wastes produced from sewage sludge incineration ash. Based on the results from experiment and analysis, it is judged that, in case of mixing proportion of 1:2 for the purpose of plastering and masonry work, the cement mortar produced by using a 10% addition ratio of sewage sludge incineration ash with mixture of hwangtoh covering all range of addition ratio, and also the cement mortar produced by using a 20% of sewage sludge incineration ash together with 0% and 10% addition ratio of hwangtoh, was possible to be applied to the practical use. In case of mixing proportion of 1:7 for manufacture of bricks and blocks, if such brick and block products are produced with 10% and 20% addition ratio of sewage sludge incineration ash having added aggregate fines or stone dust that has been actually used in brick and block manufacturing, it is judged that these bricks and blocks could be practically used in the job sites, although strength development is a little bit lower.