• Journal of electromagnetic engineering and science
• /
• 제16권4호
• /
• pp.219-224
• /
• 2016

In this paper, coupled-mode theory (CMT) is used to obtain a transient solution analytically for a wireless power transfer system (WPTS) when unit energy is applied to one of two resonators. The solutions are compared with those obtained using equivalent circuit-based analysis. The time-domain CMT is accurate only when resonant coils are weakly coupled and have large quality factors, and the reason for this inaccuracy is outlined. Even though the time-domain CMT solution does not describe the WPTS behavior precisely, it is accurate enough to allow for an understanding of the mechanism of energy exchange between two resonators qualitatively. Based on the time-domain CMT solution, the critical coupling coefficient is derived and a criterion is suggested for distinguishing inductive coupling and magnetic resonance coupling of the WPTS.

• 한국정밀공학회지
• /
• 제24권2호
• /
• pp.86-94
• /
• 2007

In this paper, a dual stage servo mechanism has been developed for image tracking system to improve control performances such as small rise time, small overshoot, small settling time, small stabilization error etc. A secondary stage, a platform, actuated by a pair of electro-magnets is mounted on a conventional elevation gimbal. In this mechanism, the gimbal provides large range but slow motion and the platform provides small range but fast positioning. A sliding mode control is applied to the platform positioning to attain robust performances and stability in the presence of the disturbance related to dynamic coupling of the gimbal and the platform. Results from experiments illustrate that the suggested dual stage mechanism controlled by the sliding mode control is effective in improving responses and attenuating the disturbance response related with dynamic coupling.

• Current Optics and Photonics
• /
• 제5권5호
• /
• pp.538-543
• /
• 2021

The evanescent wave coupling of a microring resonator is controlled by changing the gap distance between the bus waveguide and the microring waveguide. However, the interdependence of the bus waveguide's width and the coupling is not well understood. In this paper, we investigate the dependence of coupling strength on the bus waveguide's width. The strength of the evanescent wave coupling is analytically calculated using coupled-mode theory (CMT) and numerically calculated by three-dimensional finite-difference-time-domain (FDTD) simulation. The analytic and numerical simulation results show that the phase-matching condition in evanescent wave coupling does not provide maximum coupling strength, because both phase-matching and mode confinement influence the coupling. The analytic and simulation results for the evanescent coupling correspond to the experimental results. The optimized bus-waveguide width that provides maximum coupling strength results in intrinsic quality factors of up to 1.3 × 10⁶. This study provides reliable guidance for the design of microring resonators, depending on various applications.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.45-46
• /
• 2006

In this paper, a dual stage servo mechanism has been developed for image tracking system to improve transient control performances such as small rise time, small overshoot, small settling time, etc. A secondary stage, a platform, actuated by a pair of electro-magnets is mounted on a conventional elevation gimbal. In this mechanism, the gimbal provides large range but slow motion and the platform provides small range but fast positioning. A sliding mode control is applied to the platform positioning to attain robust performances and stability in the presence of the disturbance related to dynamic coupling of the gimbal and the platform. Results from experiments illustrate that the suggested dual stage mechanism controlled by the sliding mode control is effective in improving transient responses and attenuating the disturbance related with dynamic coupling.

• Journal of Astronomy and Space Sciences
• /
• 제26권3호
• /
• pp.287-294
• /
• 2009

In helioseismology it is normally assumed that p-mode oscillations are excited in a statistically independent fashion. Unfortunately, however, this issue is not clearly settled down in that two experiments exist, which apparently look in discrepancy. That is, Appourchaux et al. (2000) looked at bin-to-bin correlation and found no evidence that the assumption is invalid. On the other hand, Roth (2001) reported that p-mode pairs with nearby frequencies tend to be anti-correlated, possibly by a mode-coupling effect. This work is motivated by an idea that one may test if there exists an excess of anticorrelated power variations of pairs of solar p-modes. We have analyzed a 72-day MDI spherical-harmonic time series to examine temporal variations of p-mode power and their correlation. The power variation is computed by a running-window method after the previous study by Roth (2001), and then distribution function of power correlation between mode pairs is produced. We have confirmed Roth's result that there is an excess of anti-correlated p-mode pairs with nearby frequencies. On the other hand, the amount of excess was somewhat smaller than the previous study. Moreover, the distribution function does not exhibit significant change when we paired modes with non-nearby frequencies, implying that the excess is not due to mode coupling. We conclude that the origin of this excess of anticorrelations may not be a solar physical process, by pointing out the possibility of statistical bias playing the central role in producing the excess.

• 한국자동차공학회논문집
• /
• 제6권2호
• /
• pp.21-31
• /
• 1998

In this paper, a thermo-mechanical model for viscous coupling(VC) was suggested and torque equation in viscous mode was derived considering the effects of geometry of the plates, thermo-mechanical dynamics, silicon oil characteristics and dissolved air characteristics in the silicon oil. Theoretical results were in good accordance with experimental results demonstrating that VC thermo-mechanical model and the theoretical equations, response of the torque transmitted, pressure, temperature and time to the hump were investigated. Simulation results showed that filling rate of the silicon oil plays an integral role not only in the steady state torque characteristics but also in determining the time to hump.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권6호
• /
• pp.359-365
• /
• 2005

This paper presents an reduced-order near-optimal controller for the congestion control of Available Bit Rate (ABR) service in Asynchronous Transfer Mode (ATM) networks. We introduce the model, of a class of ABR traffic, that can be controlled using a Explicit Rate feedback for congestion control in ATM networks. Since there are great computational complexities in the class of optimal control problem for the ABR model, the near-optimal controller via reduced-order technique is applied to this model. It is implemented by the help of weakly coupling and singular perturbation theory, and we use bilinear transformation because of its computational convenience. Since the bilinear transformation can convert discrete Riccati equation into continuous Riccati equation, the design problems of optimal congestion control can be reduced. Using weakly coupling and singular perturbation theory, the computation time of Riccati equations can be saved, moreover the real-time congestion control for ATM networks can be possible.

• 한국전자파학회논문지
• /
• 제27권1호
• /
• pp.1-7
• /
• 2016

본 논문에서는 기계식 스위치를 이용한 1.5 GHz 대역 고출력 Cavity 기반 튜너블 필터를 설계하고 제작하였다. 불요파를 제거하기 위해 저역통과필터를 삽입하고, 출력을 추출하기 위해 Coupler를 내장하였으며, 고출력에 적합한 기계식 스위치를 사용하여 튜너블 필터의 시스템을 구성하였다. 저역통과필터는 4~12.75 GHz까지 40 dB 이상의 감쇄 특성을 얻었고, Coupler는 40 dB의 Coupling Value와 55 dB 이상의 Coupling Isolation을 얻었다. 제작된 기계식 스위치를 사용한 튜너블 필터 시스템은 1,495.9~1,510.9 MHz Bypass Mode에서 0.88 dB, 1,495.9~1,500.9 MHz Fil Mode에서 3.29 dB의 삽입손실 특성 및 중심주파수 1,498.4 MHz에서 132 W의 출력전력과 10 ms 이하의 스위칭 절환속도를 얻었다.

• 한국통신학회논문지
• /
• 제21권2호
• /
• pp.495-504
• /
• 1996

본 논문에서는 슬롯결합 급전구조를 갖는 직렬급전 마이크로스트립 배열 안테나의 정확한 해석 및 설계방식을 제시하고 그 특성을 분석하였다. 슬롯결합 급전구조의 정확한 해석은 급전선에서의 진행파 모드와 비진행파를 모드를 모두 고려하는 full-wave방법과 안테나간의 회로적인 결합을 이용하여 해석하였다. 수치해석에 사용된 기저함수는 해의 수렴도, 정확도 및 계산시간을 비교하여 패치는 3개의 EB모드, 슬롯은 1개의 PWS모드, 급전선은 5개의 PWS모드를 사용하였다. 이러한 안테나 해석을 바탕으로 직렬급전 배열 안테나가 정재파형 구조로 설계되었다. 정재파형 구조에서 각 소자의 여기량을 조절하는 설계방식으로는 슬롯의 길이를 변화시키는 방식과 슬롯과 급전선과의 이격거리를 변화시키는 방식을 사용하였다. 본 논문에서 사용한 이론을 이용하여 8소자 Cheyshev배열 안테나를 설계하여 실험한 결과 슬롯과 급전선간의 이격거리를 조절하여 설계하는 방식이 각 소자간의 공진 주파수의 변화가 없으므로 슬롯의 길이를 가변시키는 방식보다 설계가 간편함을 알 수 있었고, 측정 결과도 우수하게 나타났다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.552-554
• /
• 1995

In long-haul high speed optical communications, the distance between a transmitter and a receiver depends on the amount of light coupled to a single mode optical fiber from the laser diode(LD) as well as the LD characteristic itself. And the transmitter module must have long lifetime. high reliability, and even simple structure. Such points have induced laser welding technique to be a first choice in opto-electronic module packaging because it can provide strong weld joint in a short time with very small coupling loss. In this paper, packaging considerations and characteristics for high speed LD modules are discussed. They include optical path design factors for larger aligning tolerance, and novel laser welding processes for component assembly. For low coupling loss after laser welding processes, the optical path for optimum coupling of a single mode optical fiber into the LD chip was designed with the GRIN lens system providing sufficiently large aligning tolerance both in the radial and axial directions. The measured sensitivity of the LD module was better than -33.7dBm(back to back) at a BER of $10^{-10}$ with a 2.5Gbps NRZ $2^{23}-1$ PRBS.