• 한국광학회지
• /
• 제15권3호
• /
• pp.222-228
• /
• 2004

측면 연마 광섬유를 이용하여 가변 광 감쇠기를 실험적으로 구현하였다. 오버레이 물질로는 poly(vinylidene fluoride)와 poly (methyl methacrylate) 고분자 혼합체를 사용하였다. 혼합고분자의 온도를 변화시켜 오버레이의 굴절률을 조절하였고, 그로 인한 소산장 결합정도를 변화시켜 광섬유로부터 추출되는 광량을 조절하였다. 삽입손실은 0.1 ㏈ 이하였으며 30㏈이상의 감쇠를 실현하였다.

• 전자공학회논문지B
• /
• 제30B권5호
• /
• pp.34-42
• /
• 1993

Due to the low loss, broadband and accurate short time delay properties of optical fiber, it has attracted as a delay medium for high speed and broad-band signal processing. In this paper, we consider the coherent optical fiber filter of lattice structure, which uses coherent light sources and consists of directional couplers and optical fiber delay elements.The differences between the optical fiber filter and the ordinary digital filter are 1) the coupling coefficients of directional couplers are restricted between 0 and 1. 2) the optical signal is divided into ${j\sqrt{a}}and\;{j\sqrt{1-a}}$ at the directional coupler. Considering these restrictions, the design formulae and condition of realibility for optical fiber filter of lattice structure which makes the optimal use of optical signal energy are derived.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2001년도 종합학술발표회 논문집 Vol.11 No.1
• /
• pp.49-52
• /
• 2001

본 논문에서는 몬테카를로 기법 및 최소결합손실(MCL : Minimum Coupling Loss)기법을 기반으로 하여 무선통신 서비스간 보호비를 만족시키도록 최적의 보호대역을 자동으로 설정할 수 있는 알고리즘을 개발하고 그 견과를 기술하였다. 여기서 개발된 보호대역 자동 설정 알고리즘은 통계적인 몬테카를로 기법 및 간섭원과 대상 수신기 사이에 간섭이 존재하지 않도록 요구되는 이격도 계산을 위한 최소결합손실기법을 적용하여, 주어진 간섭보호비를 만족할 수 있는 최악의 상황에 대한 보호대역을 먼저 설정한 후 보호대역값을 변화시키면서 희망 수신기에서의 간섭확률을 계산을 통해 최적의 보호대역을 설정할 수 있다. 이 기법은 어떠한 형태의 무선통신 서비스에 대해서도 동시에 두가지의 간섭원이 영향이 미칠 경우에도 적용할 수 있도록 설계되었다. 또한 본 연구에서는 TDD시스템간의 간섭 시나리오를 설정하고, 개발된 보호대역 자동 선정 알고리즘을 사용한 시뮬레이터와 ITU-R에서 개발된 SEAMCAT에 의해 얻어진 보호대역 도출 결과를 비교, 분석함으로써 개발된 알고리즘의 신뢰성을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1420-1421
• /
• 2008

In this paper, a dual band microstrip filter is designed for RFID Application. Both magnetic and electric coupling structures are implemented to provide high performance passband response. The measured results demonstrate that reflection factor is 20dB and 15dB at 912MHz and 2450MHz. The measured loss is 2.6dB and 2.8dB at 912MHz and 2450MHz, respectively.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.626-629
• /
• 2008

Numerical predictions on flow phenomena in pipe network systems have been considered as playing an important role in both designing and operating various facilities of piping or duct systems, such as water supply, tunnel or mine ventilation, hydraulic systems of automobile or aircraft, and etc. Traditionally, coupling conditions between junction and connected branches are assumed to satisfy conservation law of mass and to share an equal pressure at junction node. However, the conventional methodology cannot reflect momentum interactions between pipes sufficiently. Thus, a new finite volume junction treatment is proposed both to reflect the interchanges of linear momentums between neighbor branches at junction and to include the effect of wall at junction in present work.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 추계종합학술대회 B
• /
• pp.61-65
• /
• 2008

In this paper, we studied a ZnO-based film bulk acoustic resonator (FBAR) device fabricated on a specially designed multi-layerd Bragg reflector part. Very thin chromium adhesion layers (0,03um thick) were additionally deposited to improve the quality of the Bragg reflector and some thermal treatments were performed to improve the resonant characteristics of the device. At the operating frequency of ${\sim}2.7GHz$, excellent resonant characteristics were observed in terms of return loss and quality factor, and effective electromechanical coupling coefficient. These findings are expected to be highly promising and effective for improving the performance of the FBAR devices at high frequency.

• 대한전기학회논문지
• /
• 제33권9호
• /
• pp.355-363
• /
• 1984

An ideal and an approximate eauivalent circuits of a face-mounted PZT piezoelectric transformer were introduced from the equivalent circuit taking into account the mechanical loss of a PZT piezoelectric disk vibrator. And several expressions for the resonant frequencies and for the voltage ratios were derived from the approximate circuit of the transformer. From the experiments on the vltage ratios regarding the frequency variation without load and on the load variation at resonant frequency, it was found that the voltage ratio increased with the increase of load resistance and decreased sharply with the slight deviation from the resonant frequency, and that no-load voltage ratio at the resonant frequency was proportional to the product of the mechanical quality factor and the square of the electromechanical coupling factor of the vibrator.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권3호
• /
• pp.906-918
• /
• 2012

Wireless Fidelity (WiFi) and Wireless microphone are assumed to operate on adjacent channels in TV White Spaces(TVWS). The Scenario of WiFi potentially interfering with Wireless microphone is analyzed through Minimum Coupling Loss (MCL) and Spectrum Engineering Advanced Monte Carlo Analysis Tool (SEAMCAT) based on the Monte-Carlo simulation method. In the case of single WiFi interfering with Wireless microphone, the protection distance between WiFi and the Wireless microphone should be at least 25.12 m to avoid WiFi impact on Wireless microphone. When the active number of WiFi is 12, the guard band between WiFi and Wireless microphone should not be less than 4.97 MHz to guarantee that WiFi does not interfere with the Wireless microphone.

• 한국소음진동공학회논문집
• /
• 제15권12호
• /
• pp.1355-1360
• /
• 2005

Periodic structures can be applied as a MEMS(micro-electro-mechanical system) sensor or actuator due to low energy loss and wideband frequency response. The dynamic behavior of a mistuned periodic structure Is dramatically changed from that of a perfectly tuned periodic structure. The effects of mistuning, coupling stiffness, and driving point on the forced vibration responses of a simple periodic structure ate investigate4 through numerical simulations. On the basis of that, one can design effective and reliable MEMS components using periodic structures.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 학술대회 논문집
• /
• pp.146-148
• /
• 2003

SrZrO$_3$ resistive oxide barriers on Ag sheathed Bi2223 monocore tapes were prepared by the sol-gel and dip coating method to reduce AC coupling loss. The performance of the dip-coated SrZrO$_3$ thin films was evaluated in terms of bond strength and surface microstructure by varying the amount of PVP (polyvinylpyrrolidone) binder. Although bond strength and coating thickness increased as the PVP content rose, surface microcracking was more severe for the specimen containing higher content of PVP binder. It suggests that coating thickness and microcracking of the SrZrO$_3$ films on Bi2223 tapes was governed primarily by the amount of PVP binder.