• Steel and Composite Structures
• /
• 제46권1호
• /
• pp.133-141
• /
• 2023

Based on the third-order shear deformation theory, the wave propagations in doubly curved spherical- and cylindrical- panels reinforced by carbon nanotubes (CNTs) are firstly investigated in present work. The coupled equations of wave propagation for the carbon nanotubes reinforced composite (CNTRC) doubly curved panels are established. Then, combined with the harmonic balance method, the eigenvalue technique is adopted to simulate the velocity-wave number curves of the CNTRC doubly curved panels. In the end, numerical results are showed to discuss the effects of the impact of key parameters including the volume fraction, different shell types (including spherical (R₁=R₂=R) and cylindrical (R₁=R, R₂=→∞)), wave number as well as modal number on the sensitivity of elastic waves propagating in CNTRC doubly curved shells.

• 한국전산구조공학회논문집
• /
• 제22권3호
• /
• pp.267-275
• /
• 2009

이 논문에서는 복합재료 적층판 해석을 위해 등가단층요소와 부분-선형 층별 적층요소를 서로 연계시킨 결합요소를 제안하였다. 등가단층요소는 퇴화 쉘요소에 의해 정식화되었으며, 반면에 부분-선형 층별요소의 경우 면내변위는 부분적 선형변화로, 두께방향으로의 면외변위는 일정하다고 가정하였다. 제안된 유한요소모델은 p-수렴방식에 기초를 두고 있다. 변위장 보간을 위해 적분형 르장드르 다항식이, 수치적분을 수행하기 위해서는 가우스-로바토 적분을 각각 채택하였다. 이 연구에서는 주로 p-수렴 결합요소의 검증을 위해 다양한 형태의 유한요소 다중모델에 대해 안정된 수치해석값을 보여주는 지에 초점을 두었다. 채택한 예제는 정해를 쉽게 알고 있는 단순한 문제로 인장력을 받는 평판 또는 연직하중을 받는 캔틸레버보에 적용하여 제안된 요소의 성능을 평가하였다.

• 한국분말재료학회지
• /
• 제22권6호
• /
• pp.385-390
• /
• 2015

We report a synthesis of non-toxic InP nanocrystals using non-pyrolytic precursors instead of pyrolytic and unstable tris(trimethylsilyl)phosphine, a popular precursor for synthesis of InP nanocrystals. In this study, InP nanocrystals are successfully synthesized using hexaethyl phosphorous triamide (HPT) and the synthesized InP nanocrystals showed a broad and weak photoluminescence (PL) spectrum. As synthesized InP nanocrystals are subjected to further surface modification process to enhance their stability and photoluminescence. Surface modification of InP nanocrystals is done at $230^{\circ}C$ using 1-dodecanethiol, zinc acetate and fatty acid as sources of ZnS shell. After surface modification, the synthesized InP/ZnS nanocrystals show intense PL spectra centered at the emission wavelength 612 nm through 633 nm. The synthesized InP/ZnS core/shell structure is confirmed with X-ray diffraction (XRD) and Inductively Coupled Plasma - Atomic Emission Spectrometer (ICP-AES). After surface modification, InP/ZnS nanocrystals having narrow particle size distribution are observed by Field Emission Transmission Electron Microscope (FE-TEM). In contrast to uncapped InP nanocrystals, InP/ZnS nanocrystals treated with a newly developed surface modified procedure show highly enhanced PL spectra with quantum yield of 47%.

• 한국지반공학회논문집
• /
• 제21권4호
• /
• pp.123-134
• /
• 2005

비선형 말뚝두부강성을 고려한 3차원 군말뚝기초 해석기법(YSGroup)을 개발하였으며 이를 기타 해석기법들(탄성 변위법, Croup 6.0, FBPier 3.0)과 비교${\cdot}$분석하였다. 본 해석기법은 말뚝캡을 평면쉘요소로, 교각은 3차원 보요소로, 그리고 개개 말뚝들은 보-기둥요소로 모델링 하였다. 교각 상단에 수평하중을 받는 $2\times2$배열 군말뚝기초에서 지반을 선형으로 가정한 경우를 대상으로 탄성변위법, Group 6.0, FBPier 3.0, 그리고 본 해석기법(YSGroup)을 이용하여 해석한 결과, 본 해석기법과 탄성변위법, Group 6.0은 서로 유사한 말뚝두부변위가 산정되었으나 FBPier 3.0는 다소 큰변위가 산정되었다. 지반의 비선형성이 고려된 상부구조물(교각)의 변위는 본 해석기법(YSGroup)과 FBPier 3.0을 통해 산정 가능하였는데, 이는 본 해석기법과 FBPier 3.0은 유한요소법을 이용하여 상부구조물을 직접 모델링하였기 때문이다. 말뚝두부조건이 힌지조건인 경우의 군말뚝은 말뚝캡의 과다한 회전이 발생할 가능성이 큼을 알 수 있었다.

• Journal of Dairy Science and Biotechnology
• /
• 제33권4호
• /
• pp.271-275
• /
• 2015

Colloidal semiconductor CdSe-ZnS core-shell nanocrystal quantum dot (Qdot) are luminescent inorganic fluorophores that show potential to overcome some of the functional limitations encountered with organic dyes in fluorescence labeling applications. Salmonella Enteritidis has emerged as a major cause of human salmonellosis worldwide since the 1980s. A rapid, specific, and sensitive method for the detection of Salmonella Enteritidis was developed using Qdot as a fluorescence marker coupled with immunomagnetic separation. Magnetic beads coated with anti-Salmonella Enteritidis antibodies were employed to selectively capture the target bacteria, and biotin-conjugated anti-Salmonella antibodies were added to form sandwich immune complexes. After magnetic separation, the immune complexes were labeled with Qdot via biotin-streptavidin conjugation, and fluorescence measurement was carried out using a fluorescence measurement system. The detection limit of the Qdot method was a Salmonella Enteritidis concentration of $10^3$ colony-forming units (CFU)/mL, whereas the conventional fluorescein isothiocyanate-based method required over $10^5CFU/mL$. The total detection time was within 2 h. In addition to the potential for general nanotechnology development, these results suggest a new rapid detection method of various pathogenic bacteria from a complex food matrix.

• Computers and Concrete
• /
• 제14권2호
• /
• pp.127-143
• /
• 2014

LOCA (Loss Of Coolant Accident) is one of the most important utmost accidents for Prestressed Concrete Containment Vessel (PCCV) due to its coupled effect of high temperature and inner pressure. In this paper, heat conduction analysis is used to obtain the LOCA temperature distribution of PCCV. Then the elastic internal force of PCCV under LOCA temperature is analyzed by using both simplified theoretical method and FEM (finite element methods) method. Considering the coupled effect of LOCA temperature, a nonlinear elasto-plasitic analysis is conducted for PCCV under utmost internal pressure considering three failure criteria. Results show that the LOCA temperature distribution is strongly nonlinear along the shell thickness at the early time; the moment result of simplified analysis is well coincident with the one of numerical analysis at weak constraint area; while in the strong constrained area, the value of moments and membrane forces fluctuate dramatically; the simplified and numerical analysis both show that the maximum moment occurs at 6hrs after LOCA.; the strain of PCCV under LOCA temperature is larger than the one of no temperature under elasto-plastic analysis; the LOCA temperature of 6hrs has the greatest influence on the ultimate bearing capacity with 8.43% decrease for failure criteria 1 and 2.65% decrease for failure criteria 3.

• Tribology and Lubricants
• /
• 제40권1호
• /
• pp.17-23
• /
• 2024

This study analyzes the thermal effects on the performance of an air foil thrust bearing (AFTB) using COMSOL Multiphysics to approximate actual bearing behavior under real conditions. An AFTB is a sliding-thrust bearing that uses air as a lubricant to support the axial load. The AFTB consists of top and bump foils and supports the rotating disk through the hydrodynamic pressure generated by the wedge effect from the inclined surface of the top foil and the elastic deformation of the bump foils, similar to a spring. The use of air as a lubricant has some advantages such as low friction loss and less heat generation, enabling air bearings to be widely used in high-speed rotating systems. However, even in AFTB, the effects of energy loss due to viscosity at high speeds, interface frictional heat, and thermal deformation of the foil caused by temperature increase cannot be ignored. Foil deformation derived from the thermal effect influences the minimum decay in film thickness and enhances the film pressure. For these reasons, performance analyses of isothermal AFTBs have shown few discrepancies with real bearing behavior. To account for this phenomenon, a thermal-fluid-structure analysis is conducted to describe the combined mechanics. Results show that the load capacity under the thermal effect is slightly higher than that obtained from isothermal analysis. In addition, the push and pull effects on the top foil and bump foil-free edges can be simulated. The differences between the isothermal and thermal behaviors are discussed.

• 한국소음진동공학회논문집
• /
• 제23권9호
• /
• pp.797-805
• /
• 2013

In this paper vibration and stability analysis of laminated composite shells based on the first order shear deformation theory(FSDT) for two different boundary conditions(clamped-clamped, simply supported) are performed. Structural model of cross-ply symmetric laminated composite cylindrical shells subjected to a combination of magnetic and thermal fields is developed via Hamilton's variational principle. These coupled equations of motion are based on the electromagnetic equations(Faraday, Ampere, Ohm, and Lorenz equations)and thermal equations which are involved in constitutive equations. Extended Galerkin method is adopted to obtain the discretized equations of motion. Variations of dynamic characteristics of composite shells with applied magnetic field, temperature gradient, laminate thickness-ratio and radius ratio for two boundary conditions are investigated and pertinent conclusions are derived.

• Composites Research
• /
• 제14권6호
• /
• pp.9-15
• /
• 2001

본 연구에서는 복합재료로 만들어진 박판의 상자형 보에 대만 선형 정적해석을 수행하였다. 복합재료 보의 해석을 위해서 혼합 보 이론을 적용하였으며, 상자형 단면의 벽에 대해 설정이 가능한 여러 가지 구성방정식을 고려할 수 있도록 하였다. 굽힘-비틀림 혹은 인장-비틀림 연성을 갖는 단순한 적층 형상의 복합재료 강자형 보를 예로 들어 보의 정적 거동에 미치는 복합재료의 연성효과를 고찰하였다. 본 해석결과의 타당성을 검증하기 위만 방편으로 상용 구조해석 프로그램을 이용한 정밀 유한요소 구조해석을 수행하였다. 혼합 보 이론을 이용하여 복합재료 상자형 보에 대한 단면상수 등을 해석적으로 결정하였으며, 적절한 구성방정식의 설정 여부가 최종적인 해의 정확도를 결정하는 중요한 요소임을 보였다.

• Structural Engineering and Mechanics
• /
• 제43권4호
• /
• pp.411-437
• /
• 2012

In this paper, we propose a continuum mechanics based 3-D beam finite element with cross-sectional discretization allowing for warping displacements. The beam element is directly derived from the assemblage of 3-D solid elements, and this approach results in inherently advanced modeling capabilities of the beam element. In the beam formulation, warping is fully coupled with bending, shearing, and stretching. Consequently, the proposed beam elements can consider free and constrained warping conditions, eccentricities, curved geometries, varying sections, as well as arbitrary cross-sections (including thin/thick-walled, open/closed, and single/multi-cell cross-sections). We then study the modeling and predictive capabilities of the beam elements in twisting beam problems according to geometries, boundary conditions, and cross-sectional meshes. The results are compared with reference solutions obtained by analytical methods and solid and shell finite element models. Excellent modeling capabilities and solution accuracy of the proposed beam element are observed.