• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.2
• /
• pp.267-275
• /
• 2023

As aged infrastructures have been increased, the importance of accurate maintenance costs and proper budget allocation for infrastructure become prominent under limited resources. This study proposed a mapping algorithm between representative defects, repair methods, and the estimated maintenance costs for concrete bridges. In this regard, using BMS (Bridge Management System) data analysis, bridge repair methods were classified and matched with defects according to their locations, types, and sizes. In addition, the maintenance costs were estimated based on the amount of work-load and quantity per unit using CSPR (Cost Standard Production Rate). As a result, the level of accuracy was an average of 85.1 % compared with the actual bill of quantity for Seoul bridge maintenance. The accuracy of maintenance costs is expected to be enhanced by considering the various site conditions such as pier height, extra charge conditions, additional equipment, etc.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.5
• /
• pp.463-476
• /
• 2024

The shield TBM method can eliminate environmental hazards such as noise and vibration, and is environmentally friendly and allows safe tunnel construction even in soft ground conditions, but there are many restrictions on its application due to its high construction costs compared to the NATM. Therefore, in order to increase the applicability of the shield TBM method, it is necessary to ensure economic efficiency by reducing construction costs, and it is very important to reduce segment construction costs, which account for the largest proportion of shield TBM tunnel construction costs at about 35 to 40%. As part of this, this paper considers the changes in segment stress during tunnel construction and operation, tunnel external load conditions, etc. through analysis of long-term measurement data of shield TBMs in Japan, which has abundant experience in shield TBM construction, and compares and analyzes the differences between predicted values at the design stage and measured values during operation. Through this, we study improvements to ensure segment economic efficiency at the shield TBM design stage.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.11
• /
• pp.53-60
• /
• 2019

Multi-unit house, multi-household house, row house and apartments with less than 500 households were included in the list of anti-crime for buildings following the revision of the "notice of crime prevention building standards" on July 31, 2019. Strengthening the performance of crime prevention buildings is inevitable to increase the cost of building construction, including installation of preventive facilities and use of facilities that have secured performance. Thus an economic analysis on the costs and expected benefits of implementing the standards is required for social consensus. Economic analysis is divided into cost analysis and benefit analysis. This study aims to perform an economic analysis on the installation of crime prevention facilities in the buildings subject to expanded crime prevention obligations. Cost analysis is calculated as the sum of the cost of installation and the price of the crime prevention facilities installed for each target residential building. Benefit analysis is calculated as the social cost of targeted crimes that are expected to decrease due to the installation of crime prevention facilities. Economic analysis shows that the total cost of installing crime prevention facilities in residential buildings is estimated at 107.31 billion won per year, while the total benefit from enhanced crime prevention performance is estimated at 9.38 billion won per year. Considering inflation, benefits are expected to outpace costs in the 28th year since the system was implemented.

• Korea Journal of Hospital Management
• /
• v.25 no.2
• /
• pp.45-56
• /
• 2020

Purpose: The purpose of this study is to investigate medical care behaviors influencing accuracy of the payment based New diagnosis-related groups (DRG) compared to fee for service (FFS) in hospitalized patients with medical illness. Methodology: In order to estimate the difference in medical costs between New DRG and FFS depending on medical care behaviors, medical records and hospital claims data (n=4,232) were utilized, which were collected from a single public hospital during the first-half of 2018. Data were analyzed by descriptive statistics, t-test, chi-square test, and multivariate binary logistic regression. Findings: The average difference in medical costs between New DRG and FFS were KRW 506,711±13,945 with incentives and KRW -51,506±12,979 without incentives, respectively. Forty-four point two percent (44.2%, n=1,872) of total subjects were shown to have negative compensation in overall medical costs with New DRG compared to the costs with FFS. Medical care behaviors that affected on the negative compensation were the presence of severe bed sores on admission, medical consultations, death, operations, medications and laboratory or imaging tests with unit price over KRW 100,000, hospital-acquired complications or underlying comorbidities, elderly patients (≧65 years), and hospitalized for more than average inpatient days defined by New DRG (p<0.001). The difference in average medical cost between New DRG and FFS for a group with mild illness was KRW -11,900±10,544, whereas it was KRW -196,800±46,364 for a group with severe illness (p<0.0001). Practical Implications: These findings suggest that New DRG payment model without incentives may incompletely cover the variation of medical costs in real clinical practice. Therefore, policy makers need to consider that the current New DRG reimbursement should be focused and refined to improve accuracy of payment on medical care resources utilized in severe and complex medical conditions.

• The Journal of Fisheries Business Administration
• /
• v.14 no.2
• /
• pp.15-68
• /
• 1983

From the economic point of view the fishing port is the complex of installations on land, organized to serve the fishing fleet and its cargo, and is the main link in the production chain of all components of the fishing industry, with the aim of achieving the planned targets with the minimum cost. Fishing port investment decisions have had significant impact on the development aims of Korean fisheries. Fishing port investments in Korea are made mostly by public or semipublic port authorities. Such investments should be judged not purely on the basis of financial profitability but rather on the extent to which they serve the development aims of the fishing industry. This makes the economic appraisal process more complex and presents certain problems in correctly quantifying the economic costs and benefits of the fishing port projects. This study concentrates more on the theoretical economic appraisal models than on the purely financial aspects of fishing port investments and points out the difference between the two approaches. In the result, there is clearly an element of judgment as to whether or not a shadow price needs to be used in estimating economic benefits and costs. From this viewpoint, some attempts are made to provide definitions of the possible economic benefits and costs, and methods for estimating and evaluating them in Part III and IV. Especially queueing theory is applied in the calculation of economic benefits. When a project is contemplated and analysis shows it to Lave a positive NPV, one question that arises is whether it should be implemented now or delayed. In this paper, the first year rate of return method is regarded as a more concise way of solving the timing of investment, At the end of Part IV, risk analysis of fishing port investments is considered. It can be handled in a number of ways, ranging from informal judgment to complex statistical analyses involving large-scale computer models, This paper recommends that evaluators of fishing port investments use the sensitivity analysis indicating exactly how much NPV will change in response to a given change in an input variable, other things held constant. Decisions regarding the amount of capacity to provide must be made in fishing port investments. Providing too much service would involve excessive capital costs. On the other hand, not providing enough service capacity would cause the waiting line of fishing vessels to become excessively long at times. Therefore, in Part V, the optimal number of berths and berth productivity in fishing port are defined as follows: Minimize E(TC) ＝ E(WC)＋E(SC) The minimum of this function is the solution and that is the optimal number of berth and berth productivity in fishing port.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.5
• /
• pp.515-525
• /
• 2015

Currently, according to the climate change, serious damage by typhoon has been occurred in the world. In this respect, the research on the prediction model to minimize the damage from various natural disaster has been conducted in several developed countries. In the case of U.S, various models to predict building damage costs have been used widely in many organizations such as insurance companies and governments. In South Korea, although studies regarding damage prediction model according to typhoon have been conducted, the scope has been only limited to consider the property of typhoon. However, it is necessary to consider various factors such as typhoon information, geography, construction environment, and socio-economy factors to predict the damages. Therefore, to address this issue, first, correlation analysis is conducted between various variables based on the data of typhoon from 2003 to 2012. Second, the damage prediction model by using regression analysis is developed based on suggested influence factors. The findings of this study can be utilized to develop the model for predicting the damage costs of buildings by typhoon like HAZUS-MH of US.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.4
• /
• pp.89-97
• /
• 2015

This paper analyzes the duration of the construction document (CD) phase of 42 large public building projects delivered by the total solution service of Public Procurement Services in Korea from 2009 to 2014. The quality of construction documents significantly affects the quality of construction and facility management. Thus, securing appropriate time for the CD phase during project planning is important for the quality of a project. Currently, the duration of the CD phase is planned based on the construction costs of a project following a notice of the Ministry of Land, Infrastructure and Transport. However, our analysis results showed that the correlation between the actual duration of the CD phase and construction costs is very weak. The actual CD phase takes 1.33-1.79 times longer than the planned duration. The practitioners who were interviewed, were already aware that the correlation between the duration of the CD phase and the construction costs is weak. They identified the complexity of the project, the extent of the design changes, project type, client characteristics, and others as more influential factors on the CD phase than the construction costs. To improve the quality of CDs, a new guideline for determining an adequate CD phase duration should be studied and developed.

• Journal of Nutrition and Health
• /
• v.30 no.10
• /
• pp.1229-1243
• /
• 1997

The purpose of this study were to :(a) investigate meal costs, plate waste costs, and advantages/disadvantages of conventional /commissary foodservices and (b) compare the effectiveness of commissary foodservice systems with that of conventional systems. Questionnaires were developed and mailed to 136 schools in Kyonggi-do. A total of 106 questionnaires were usable, resulting in a 77.9% response rate. Teacher's teaching of good food habits and students satisfaction with school foodservices were surveyed in three schools from each system. Moreover, plate waste was measured to express cost and benefit in currency. Data were analyzed using the SAS package for description analysis, t-test, $\chi$$^2$ test, ANOVA, and the Vilcoxon rank sum test. Approximately seventy percent of 294schools in Kyonggi-do were operating commissary systems and most of them were of the rural (reduced paid) type. The number of meals served varied significantly between types of foodservice. The results of this study indicated that average food , labor utility , and supply costs were saved in the commissary system and that the total meal cost/person for a day was 1218.7 won compared to 1452.4 won in the conventional system. Though total meal costs were saved in the commissary system, dietitians had difficulties cooperating with school foodservice committees and supporters associations, especially in satellites of the commissary system. In addition, dietitians and teachers in the commissary system did not carry out teaching activities on good food habits to students as often as in the conventional system. Other problems that dietitians recognized in the commissary system were difficulties in training employees and parents for portion control and serving relatively simple menus. Students, as customers of school foodservices, are very important for system evaluation . Students in the commissary system scored of food itself , cleanliness of tableware, waiting time, quantity of meal and food temperature significantly lower than students in the conventional system. Moreover , the rate of plate waste was 20.5% in the commissary system as compared to 3.3% in the conventional system. Cost-effectiveness (saving 233.7won/person/day) is the main benefit of the commissary system. However , because of lower satisfaction scores and a highest plate waste rate, 201.9won/ person were wasted in the commissary system. The results of this study suggest that increasing the number of meals served within a commissary system might maximize the efficiency of the system, but increasing the number of satellites is not recommended because it might be out of dietitians control in many aspects.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.2
• /
• pp.32-43
• /
• 2014

This study set out to identify the importance of each factor influencing facility selection with a survey among public medical facilities under the category of public buildings and apply the importance of economy, technology and environment with the weighting factor method, thus proposing optimal application plans. The research content of each section can be summarized as follows:1) Estimated energy consumption according to the energy simulation was 65,129MWh/yr, which was 18.7% higher than that according to the calculation equation. Of the energy consumption, more than 80% was used by heating and cooling facilities and construction facilities, and 20% was used by electronics such as medical equipments and in and outdoor lighting. 2) The results of a survey on the factors influencing the importance when selecting a new and renewable energy system reveal that the upper items had a priority in economy, environment, and technology in the descending order and that the lower item shad a priority in initial investments, maintenance and repair costs=energy costs, supply reliability, energy efficiency and $CO_2$ emissions in the descending order. 3) The application alternatives were analyzed in economy, technology, and environment. As a result, a geothermal system turned out to be the most excellent one a cross all the upper and lower comparison items. Of the other systems, a solar thermal system was superior in initial investments, maintenance and repair costs, and energy efficiency, where as a photovoltaic system was superior in energy costs, supply reliability, and $CO_2$ emissions. 4) As for the mixed application ratio among economy, technology, and environment, when the percentage of a geothermal system was approximately 80% or higher in anew and renewable energy system, it was the best and most optimal application plan.

• Journal of Distribution Science
• /
• v.10 no.11
• /
• pp.79-88
• /
• 2012

Purpose - The objective of this paper is to suggest that a company's CRM activities have an effect on customer loyalty in the Korean retail industry. Typically, Korean customers use large local marts with convenience in the absence of any other choice. Therefore, this study aims to shed light on the fact that customers do not break away from their preferred retail stores, either owing to their stringent loyalty (the lie loyalty) or difficulty in turning to alternative choices. Research design, data, methodology - By surveying a sample of 200 hyper-markets through a questionnaire, and excluding dubious and missing responses, I obtained 181 samples to be included in the empirical analysis. The survey was conducted for two weeks during October 2011. AMOS and SPSS18 statistical packages were used for conducting statistical analysis for this study. This paper was developed using the concept of customer equity on CRM, which is known to have a positive impact on customer loyalty through the satisfaction and switching-barrier parameters. The hypothesis of this paper is that customer equity is composed of relationship equity, value equity and brand equity, and that the relationship equity variable has positive effects on the value equity and brand equity amongst other types of customer equity. Moreover, customer equity influences customer loyalty through parameters including customer satisfaction and switching costs in the Korean retail industry. Results - According to the results of the analysis, it was confirmed that relationship value had a positive effect (+) on all variables, including the perceived QoS (Quality of Service), store brand images, economic value, and store convenience. It was also confirmed that the assumption that the perceived QoS (Quality of Service), economic value, and store convenience had a positive effect on customer satisfaction was shown to be statistically significant, with a p-value below 0.05. Only the store brand value variable had an effect on the switching-cost variable with respect to the causal sequence of the variables, including the perceived QoS, store brand value, economic value, and store convenience. The remaining variables did not seem to influence the switching-cost variable. On the other hand, another effect showed that customer satisfaction had a statistically significant influence on the switching-costs variable. Moreover, the customer satisfaction and switching-cost variables also had a statistical influence on customer loyalty. Conclusions - The CRM activities had an influence on various variables (including perceived QoS, perceived economic value, store brand value, and store convenience) pertaining to customer values. Customer satisfaction and switching-cost had some effects on customer loyalty as a parameter. This confirms that stringent loyalty exists with respect to customer loyalty in the retail industry. The fact that the variable had such a statistically significant influence on the switching-cost and store brand equity variables means that consumers react to the reputation of a brand, confidence about the store, and quality confidence. The implications of this study in the retail industry should be further extended to devise strategies for customer retention.