• 보건행정학회지
• /
• 제25권4호
• /
• pp.295-306
• /
• 2015

This study aims to examine the performance of public municipal hospitals through the analysis of data envelopment analysis, efficiency, profitability, and publicness by using panel data during period from 2006 to 2010. The main findings of the study are as follows. First, as a result of efficiency analysis during the period from 2006 to 2010, it was revealed that the number of staff by each job category, labor cost ratio, the number of operating beds need to be decreased. Second, the performance data represented by the indicators of efficiency, profitability and publicness were complementary and showed a tendency of being increased or decreased in same direction. Third, from the result of panel analysis, the efficiency was mainly influenced by the structural factors, while the profitability was influenced by managerial factors, and the publicness by medical environment. In conclusion, in order to enhance the performance of public municipal hospitals in Korea, it is important to harmonize the effort for efficiency, financial and policy support by central and local government, and the continuous participation of community residents.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 춘계학술발표회논문집
• /
• pp.527-533
• /
• 2004

This study has based on RTKGPS and DGPS and Digital Video Camera to 3-dimensional position data of road, as a Road Spatial Information. Economic efficiency analysis was applied to road spatial information system built up by four different methods such as conventional surveying, RTK GPS, DGPS, and Digital Video Camera. As a result of analysis, it was shown conventional surveying 100%, it was shown that about 64% in RTKGPS, it was shown that about 63% in DGPS, it was shown that about 37% in Digital Video Camera cost-saving.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.303-310
• /
• 2008

In Korea, the current noise impact assessment has not yet considered the vertical noise propagation property by buildings and other obstacles. And noise control plan has been established without conducting the economic assessment for the noise control facilities. A noise map is used to calculate the noise level based on a theoretical formula or an empirical formula, and also predict the characteristics of vertical propagation by linking with a geometry data. And It is Possible to analyze cost-effect of noise control facilities by consider installation costs. In this study, we addressed the application of noise map for noise impact assessment and cost-effect analysis of noise control facilities.

• 전기학회논문지
• /
• 제61권7호
• /
• pp.950-956
• /
• 2012

As development of battery technologies, the installation of Battery Energy Storage System (BESS) increased. The BESS can be used for various purposes such like frequency response, load leveling, and fluctuation mitigation of renewable energy generators. In this paper, three state BESS model is proposed. the BESS model considering charge, discharge and keeping efficiency, and life cycle according to depth of discharge (DOD). Then, the benefit and cost of BESS installed at substation for load leveling are summarized. The economic evaluation of BESS is analyzed using net present values (NPV) analysis. In case study, the NPV analysis of NaS battery system is carried out using the proposed BESS model. Because the result of economic evaluation of BESS using nowadays cost data is not positive, the sensitivity analysis of BESS is conducted by changing the capital cost and energy cost.

• 한국수소및신에너지학회논문집
• /
• 제33권6호
• /
• pp.643-659
• /
• 2022

For the economic analysis of fuel cells, levelized cost of electricity was calculated according to the type, capacity, and annual production of the fuel cells. The cost of every component was calculated through the system component breakdown. The direct cost of the system included stack cost, component cost, assembly, test, and conditioning cost, and profit markup cost were added. The effect of capacity and annual production was analyzed by fuel cell type. Sensitivity analysis was performed according to stack life, capital cost, project period, and fuel cost. As a result, it was derived how much the economic efficiency of the fuel cell improves as the capacity increases and the annual production increases.

• ETRI Journal
• /
• 제30권4호
• /
• pp.587-596
• /
• 2008

Facility-based competition (FBC) in the telecommunications market is considered to have lower static efficiency in the short term and higher dynamic efficiency in the long term. Under service-based competition (SBC), the entrant can reduce its setup costs by leasing network facilities from the incumbent, which makes the entrant viable, pushes the market price down and promotes static efficiency. This paper attempts to measure static efficiency by comparing the profits of the incumbent and entrant in terms of consumer surplus and social welfare under each competition type by extending the Stackelberg model. The results, assuming a linear demand function and variation in regulatory level, show that FBC results in higher social welfare than SBC on the whole. However, SBC accompanied by strong regulation is also shown to have the potential to be superior over FBC. It is also revealed that FBC exhibits a higher producer surplus (particularly, the incumbent's producer surplus) and is, therefore, more desirable in terms of dynamic efficiency. When the entrant's cost is high in FBC, social welfare is shown to be lowered, implying that cost competitiveness is a necessary condition for social welfare.

• 한국건설관리학회논문집
• /
• 제5권4호
• /
• pp.130-138
• /
• 2004

고층건물의 해체공사는 멀지 않은 장래에 급속도로 증가할 것으로 예상되며, 이들의 일반적인 해체방법은 기계식해체공법과 발파해체공법으로 대별할 수 있다. 해체공법의 결정은 해당건물이 가지는 지리적, 환경적 요인에 따라 많은 변동요인들이 있지만 일상적인 경우라면 경제성 판단이 공법선정의 가장 중요한 요인으로 작용한다. 따라서 본 연구에서는 다른 해체공법 선정요인들 보다는 객관적인 비교가 가능한 도심지 고층건물의 해체비용을 기계식공법과 발파공법으로 구분하여 산출하였으며, 이것의 비교 분석을 통하여 발파해체공법의 향후 활성화 시점을 전망하였다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.235-240
• /
• 2009

Crystlline silicon solar cells markets are increasing at rapid pace. now, crystlline silicon solar cells markets screen-printing solar cell is occupying. screen-printing solar cells manufacturing process are very quick, there is a strong point which is a low cost. but silicon and metal contact, uses Ag & Al pates. because of, high contact resistance, high series resistance and sintering inside process the electric conductivity decreases with 1/3. and In pastes ingredients uses Ag where $80{\sim}90%$ is metal of high cost. because of low cost solar cells descriptions is difficult. therefore BCSC(Buried Contact Solar Cell) is developed. and uses light-induced plating, ln-line galvanization developed equipments. Ni/Cu matel contact solar cells researches. in Germany Fraunhofer ISE. In order to manufacture high-efficiency solar cells, metal selections are important. metal materials get in metal resistance does small, to be electric conductivity does highly. efficiency must raise an increase with rise of the curve factor where the contact resistance of the silicon substrate and is caused by few with decrement of series resistance. Ni metal materials the price is cheap, Ti comes similar resistance. Cu and Ag has the electric conductivity which is similar. and Cu price is cheap. In this paper, Ni/Cu/Ag metal contact cell with screen printing manufactured, silicon metal contact comparison and analysis.

• 경영과정보연구
• /
• 제6권
• /
• pp.117-135
• /
• 2001

This study investigates whether the post-merger bad performance of merging firms was caused by the increase of cost and which cost is responsible for that, if it were. To do this, it is investigated whether there is any difference in terms of cost between pre-merger versus post-merger firms. Also the comparison of cost is used between merging firms and non-merging control groups. The finding is that the merging firms have a bigger cost than the non-merging control group and the post-merger firms have a bigger cost than the pre-merger firms. Especially labor cost to revenue and depreciation cost to revenue are statistically very different among them. Thus it is suggested that there are inefficiency of manpower and assets.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.178-185
• /
• 1999

Minimum life-cycle cost helps to evaluate cost effectiveness of base-isolated bridges under specific condition. Life-cycle cost mainly consists of the initial construction cost and the expected damage cost. Damage cost estimation needs proper model of input ground motion failure probability evaluation method and limit states definition. We model the input ground motion as spectral density function compatible with the response spectra defined at each seismicity and site condition. Spectrum analysis and crossing theory is suitable for reseating calculation of failure probabilities in the process of cost minimization. Limit states of base-isolated bridges re defined for superstructure isolator and pier respectively The method is applied to both base-isolated bridges and conventional bridges under the same conditions to investigate cost effectiveness of base isolation in low and moderate seismic region. the results show that base-isolation of bridges are more effective in low and moderate seismic region and that the site effects on the economical efficiency may not be negligible in such a region.