• KIEE International Transactions on Power Engineering
• /
• 제5A권3호
• /
• pp.286-292
• /
• 2005

As the power industry moves towards open competition, there has been a call for methodology to evaluate power system reliability by using composite interruption cost. This paper presents algorithms to evaluate the interruption cost of distribution power systems by taking into consideration the failure source and the composite customer interruption cost. From the consumer's standpoint, the composite customer interruption cost is considered as the most valuable index to estimate the reliability of a power distribution system. This paper presents new algorithms that consider the load by customer type and failure probability by distribution facilities while calculating the amount of unserved energy by customer type. Finally, evaluation results of unserved energy and system interruption cost based on composite customer interruption cost are shown in detail.

• 산업경영시스템학회지
• /
• 제31권2호
• /
• pp.43-50
• /
• 2008

In this paper we suggest the methods that compute the total inventory cost based on EOQ and the total inventory cost based on OMMIP. The total inventory cost consists of purchasing cost, ordering cost, inventory holding cost, stockout cost and so on. This papers also proposes the method that decides optimum order quantity as the order amount to minimize the total inventory cost with comparison of EOQ total inventory cost and OMMIP total inventory cost according to inventory holding cost as a fraction of unit cost.

• KIEE International Transactions on Power Engineering
• /
• 제3A권3호
• /
• pp.124-129
• /
• 2003

As the power industry moves towards open competition, there has been a call for methodology to evaluate power system reliability by using composite interruption cost. This paper presents algorithms to evaluate the interruption cost of distribution power systems by taking into consideration the failure source and the composite customer interruption cost. From the consumer's standpoint, the composite customer interruption cost is considered as the most valuable index to estimate the reliability of a power distribution system. This paper presents new algorithms that take into account the load by customer type and failure probability by distribution facilities while calculating the amount of unserved energy by customer type. Finally, evaluation results of unserved energy and system interruption cost based on composite customer interruption cost are shown in detail.

• 한국건축시공학회지
• /
• 제12권6호
• /
• pp.624-635
• /
• 2012

Construction projects, including housing, are carried out over long periods of time. According to changes to the construction period, the cost of input materials and wages also changes. Therefore appropriate management is important in order to minimize cost risks caused by fluctuations in prices. In Korea, housing units are usually sold in lots prior to construction completion. Therefore, careful management of input elements such as materials and equipment that are sensitive to price fluctuations is very important. This study deals with how the price fluctuation of materials, labor, and equipment influences the change of housing cost and seeks a way for cost management through identifying key resources sensitive to price fluctuation. As a result, a change to the housing cost index multiplies depending on cost changes of materials and labor together. Labor costs are a major factor on the housing cost index. In addition, certain types of materials and labor input to housing construction greatly influence price fluctuations. Thus, it is found that managing those main cost factors is the key for effective cost management.

• 한국안전학회지
• /
• 제24권5호
• /
• pp.48-56
• /
• 2009

This paper presents the procedure for the optimal design of a PSC-I girder bridge considering life cycle cost (LCC). The load carrying capacity curves for the concrete deck, PSC-I girder and $\pi$-type pier were derived and used for the estimate of service lives. Total life cycle cost for the service life was calculated as sum of initial cost, damage cost, maintenance cost, repair and rehabilitation cost, user cost, and disposal cost. The advanced First Order Second Moment method was used to estimate the damage cost. The optimization method was applied to the design of PSC-I girder bridge. The objective function was set to the annual cost, which is defined by dividing the total life cycle cost by the service life, and constraints were formulated on the basis of Korean Standards. The optimal design was performed for various service lives and the effects of design factors were investigated.

• Structural Engineering and Mechanics
• /
• 제59권5호
• /
• pp.933-950
• /
• 2016

Decks, interior beams, edge beams and girders are the parts of a steel floor system. If the deck is optimized without considering beam optimization, finding best result is simple. However, a deck with higher cost may increase the composite action of the beams and decrease the beam cost reducing the total cost. Also different number of floor divisions can improve the total floor cost. Increasing beam capacity by using castellated beams is other efficient method to save the costs. In this study, floor optimization is performed and these three issues are discussed. Floor division number and deck sections are some of the variables. Also for each beam, profile section of the beam, beam cutting depth, cutting angle, spacing between holes and number of filled holes at the ends of castellated beams are other variables. Constraints include the application of stress, stability, deflection and vibration limitations according to the load and resistance factor (LRFD) design. Objective function is the total cost of the floor consisting of the steel profile cost, cutting and welding cost, concrete cost, steel deck cost, shear stud cost and construction costs. Optimization is performed by enhanced colliding body optimization (ECBO), Results show that using castellated beams, selecting a deck with higher price and considering different number of floor divisions can decrease the total cost of the floor.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.251-254
• /
• 2005

A new driving waveform was proposed to reduce the cost in PDP-TV based on Vt close curve by eliminating the common (X) board under the conventional 42-inch panel structure. Due to the serious misfiring problem during a sustain-period when applying the new driving waveform, the wall voltage was measured and analyzed after the reset-period using Vt close curve. As a result of adopting the proposed driving waveform designed using Vt close curve analysis, the cost of PDP module could reduce compared with the conventional PDP module without any misfiring discharge.

• 산업경영시스템학회지
• /
• 제28권2호
• /
• pp.117-124
• /
• 2005

This study tries to develop the models of measuring the level of product availability accommodated for features of specific customers dividing customers into VIP customers and general customers. Functions of costs that the models are composed of are cost of holding safety stock and cost of lost opportunities. The existing model of measuring the level of product availability which focused on cost of holding safety stock for VIP customers should be reinforced by considering cost of lost opportunities caused by general customers' quitting trades with a company. This study tries to present realistic solutions for problems in making decisions related to the total inventory. This study concludes that the model of the level of product availability meeting general customers' needs is more efficient according to increasing of a latent demand of the general customers who quit trades with a company and the cost of lost opportunities.

• 품질경영학회지
• /
• 제51권3호
• /
• pp.461-479
• /
• 2023

Purpose: It emphasizes the importance of cost analysis for weapons systems that require enormous develop- ment costs, analyzes the problems of cost analysis steps from a practical point of view, and presents the direction of business development in terms of cost analysis reliability, timeliness, and efficiency. Methods: It analyzes the R&D cost of Micro satellites with a complex cost structure and large scale according to engineering estimation procedures, derives major analysis step-by-step problems, and presents business development directions. Results: Problems with standards and assumptions, data collection, cost division structure, and cost estimation methods were derived through the micro satellite cost analysis process, and business development directions such as expanding common standards, standardizing basic data, standardizing cost division structures and cost items, and data asset were presented. Conclusion: In order to develop work in terms of cost analysis reliability, timeliness, and efficiency, it is important to prepare and standardize standards and rules for detailed tasks at each analysis stage, and through this, it is expected that high utilization value and systematic cost data will be assetized in the future.

• 지질동맥경화학회지
• /
• 제5권1호
• /
• pp.61-77
• /
• 2016

Objective: This study aims to analyze cost-effectiveness of two most-commonly used statins from the perspective of the Korean national health system. Methods: The scope of the analysis included rosuvastatin (5 mg, 10 mg, and 20 mg) and atorvastatin (10 mg, 20 mg, 40 mg, and 80 mg). Effectiveness was defined as percentage (%) and absolute (mg/dL) reductions of low-density lipoprotein cholesterol (LDL-C) from the baseline. They were derived from published randomized controlled studies for rosuvastatin and atorvastatin. Effectiveness was defined as reductions in LDL-C levels per mg dose of the drugs. The annual direct medical costs including drug acquisition costs and monitoring costs over the one-year time horizon were calculated for each alternative. The average cost-effectiveness ratios (ACERs) and incremental cost-effectiveness ratios (ICERs) for each statin dose were calculated. Results: The ACERs for all doses of rosuvastatin (5 mg, 10 mg, and 20 mg) were lower than those for all doses of atorvastatin (10 mg, 20 mg, 40 mg, and 80 mg). Rosuvastatin 10 mg was the most cost-effective statin for LDL-C reduction. In cost-effectiveness analyses for corresponding doses of rosuvastatin and atorvastatin, rosuvastatin was the superior strategy which suggests both higher effectiveness and lower costs than atorvastatin. However, we have to consider this analysis is highly influenced by current price of statins in each market. Conclusion: For reduction of LDL-C levels in Korean patients with dyslipidemia, rosuvastatin 10mg is the most cost-effective statin in the current Korean market.