• 한국정밀공학회지
• /
• 제26권2호
• /
• pp.26-34
• /
• 2009

This paper is related to MQL (Minimum Quantity Lubrication) milling process, which is one of the environmentally friendly cuttings. The objective is to compare MQL milling process with conventional cutting fluid systems. To this end, machinability of MQL milling process was investigated, followed by the cost evaluation. Cutting force, surface roughness, tool wear, and cutting temperature were compared with each cutting fluid method. Consequently, total production costs wear evaluated with the mathematical models in terms of machining cost and cutting fluid loss.

• 대한산업공학회지
• /
• 제27권3호
• /
• pp.297-304
• /
• 2001

Procurement decisions for inspection equipment are often made heavily based on the initial purchase price instead of the effects of inspection cost, equipment calibration and utilization over the lifetime. Cost of ownership(COO) models that take into account all of these cost factors together have been developed focusing on a single quality characteristic. In modern manufacturing environment, inspection equipment often can deal with more than one quality characteristic simultaneously. In this paper, we propose the revised COO model for the economic evaluation of the inspection equipment that can accommodate multiple quality characteristics. We also employ an engineering economy model to compare equipments with different life span. Software is developed for handy comparison of the COO of alternative equipments along with sensitivity analysis far the optimal procurement decision.

• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.275-280
• /
• 2013

The tractor front axle has the lower standard for noise and vibration relatively and it increase the possibility to develop of the alternative straight bevel gear of the expensive spiral bevel gear. The purpose of this paper is to compare of the spiral vs. the straight bevel gear manufacturing process. The manufacturing cost and productivity are compared after the spiral bevel gear of the tractor front axle is replaced of to the straight bevel gear. If spiral bevel gear is replaced to straight bevel gear, the cost is reduce 4.6% and productivity is increase 18%.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권1호
• /
• pp.135-158
• /
• 2018

High-Speed vehicles can be considered as multiple mobile nodes that move together in a large-scale mobile network. High-speed makes the time allowed for a mobile node to complete a handover procedure shorter and more frequently. Hence, several protocols are used to manage the mobility of mobile nodes such as Network Mobility (NEMO). However, there are still some problems such as high handover latency and packet loss. So efficient handover management is needed to meet Quality of Service (QoS) requirements for real-time applications. This paper utilizes the cross-layer seamless handover technique for network mobility presented in cellular networks. It extends this technique to propose QoS-aware NEMO protocol which considers QoS requirements for real-time applications. A novel analytical framework is developed to compare the performance of the proposed protocol with basic NEMO using cost functions for realistic city mobility model. The numerical results show that QoS-aware NEMO protocol improves the performance in terms of handover latency, packet delivery cost, location update cost, and total cost.

• 대한산업공학회지
• /
• 제34권4호
• /
• pp.425-432
• /
• 2008

While the Vendor-Managed Inventory(VMI) is a convenient inventory replenishment policy for the customer company, the supplier usually bears the burden of higher inventory and urgent shipments to avoid shortage. Recently some manufacturers begin to fix the production schedule for the next few days (such as three days). Utilizing that information can improve the efficiency of the VMI. In this study, we present a myopic optimization model using a mixed inter programming; and a heuristics algorithm. We compare the performance of the two proposed methods with the existing (s, S) reorder policy. We consider the total cost as the sum of transportation cost and inventory cost at the customer's site. Numerical tests indicate that the two proposed methods significantly reduce the total cost over the (s, S) policy.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.319-320
• /
• 2012

International oil prices is the world's leading macroeconomic indicators. Rising international oil price has been worsening. profitability of construction company including material cost as well stagnation in housing market. Thus, according to fluctuations in international oil prices has cost index need to see any change happening there. in this study, 2000 to 2011 interest rates, exchange rates and oil price fluctuations in construction cost is to compare the impact.

• 산업공학
• /
• 제14권2호
• /
• pp.205-209
• /
• 2001

The number of tunnel has fast increased with the rapid expansion of highway network. Tunnel should be designed to provide for drivers both safety and pleasant driving conditions. In this perspective, the design for tunnel lightning is very important in order to provide its safety, pleasantness, and cost-efficienty of maintenance, all of which should be considered and analyzed for a better tunnel lighting. This paper attempts to compare the low-pressure sodium lamp, which has usually been used for tunnel lighting, with the fluorescent lamp, which we consider as an alternative for the former. In an effort to determine the number of lamps to meet the required illuminance in the tunnel, this research employs a simulation technique which would allow us to conjecture, with the aid of basic model, the life cycle cost for illumination per each tunnel. This analysis is expected to provide a basic method and related information for tunnel development and design.

• Industrial Engineering and Management Systems
• /
• 제3권1호
• /
• pp.59-62
• /
• 2004

The number of tunnel has fast increased with the rapid expansion of highway network. Tunnel should be designed to provide for drivers both safety and pleasant driving conditions. In this perspective, the design for tunnel lightning is very important in order to provide its safety, pleasantness, and cost-efficiency of maintenance, all of which should be considered and analyzed for a better tunnel lighting. This paper attempts to compare the low-pressure sodium lamp, which have usually been used for tunnel lighting, with the fluorescent lamp, which we consider as an alternative for the former. In an effort to determine the number of lamps to meet the required illuminance in the tunnel, this research employs a simulation technique which would allow us to conjecture, with the aid of basic model, the life cycle cost for illumination per each tunnel. This analysis is expected to provide a basic method and related information for tunnel development and design.

• 전기학회논문지
• /
• 제58권11호
• /
• pp.2162-2167
• /
• 2009

A Low cost and variable speed brushless motor drive system with single switch per phase is presented. The motor drive is realized with a novel two-phase flux-reversal-free switched reluctance motor and a split AC two switch converter. The strategy of the controller and the converter for its realization are described. Comparisons between a split AC converter, asymmetric converter, split DC converter, single controllable switch converter, and N+1 converter are performed for its device rating, cost, switching losses and conduction losses, and converter efficiency. The split AC converter is analyzed and simulated to verify the characteristics of the converter circuitry and control feasibility and the simulation results are presented. The efficiency with various loads is numerically estimated and experimentally compared from viewpoint of subsystem and system in details. The focus of this paper is to compare the presented motor drive system to the asymmetric converter system throughout experiments and demonstrate single switch per phase converter having comparable efficiency as the asymmetric converter system.

• 아태비즈니스연구
• /
• 제9권4호
• /
• pp.67-84
• /
• 2018

This study is about comparing coal thermal plant to LNG combined power plant in respect of environmental and economic cost analysis. In addition sensitive analysis of power cost and discount rate is conducted to compare the result of change in endogenous and exogenous variable. For environmental assessment, when they generate 10,669GWh yearly, coal thermal power plant emits sulfur oxides 959ton, nitrogen oxide 690ton, particulate matter 168ton and LNG combined power plant emits only nitrogen oxide 886ton respectively every year. Regarding economic cost analysis on both power plants during persisting period 30 years, coal thermal power plant is more cost effective 4,751 billion won than LNG combined taking in account the initial, operational, energy and environmental cost at 10,669GWh yearly in spite of only LNG combined power plant's energy cost higher than coal thermal. In case of sensitive analysis of power cost and discount rate, as 1% rise or drop in power cost, the total cost of coal thermal power plant increases or decreases 81 billion won and LNG combined 157 billion won up or down respectively. When discount rate 1% higher, the cost of coal thermal and LNG combined power plant decrease 498 billion won and 539 billion won for each. When discount rate 1% lower, the cost of both power plant increase 539 billion won and 837 billion won. With comparing each result of change in power cost and discount rate, as discount rate is weigher than power cost, which means most influential variable of power plan is discount rate one of exogenous variables not endogenous.