• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.1
• /
• pp.41-49
• /
• 2000

Flip chip assembly on organic substrates using ACAs have received much attentions due to many advantages such as easier processing, good electrical performance, lower cost, and low temperature processing compatible with organic substrates. ACAs are generally composed of epoxy polymer resin and small amount of conductive fillers (less than 10 wt.%). As a result, ACAs have almost the same CTE values as an epoxy material itself which are higher than conventional underfill materials which contains lots of fillers. Therefore, it is necessary to lower the CTE value of ACAs to obtain more reliable flip chip assembly on organic substrates using ACAs. To modify the ACA composite materials with some amount of conductive fillers, non-conductive fillers were incorporated into ACAs. In this paper, we investigated the effect of fillers on the thermo-mechanical properties of modified ACA composite materials and the reliability of flip chip assembly on organic substrates using modified ACA composite materials. For the characterization of modified ACAs composites with different content of non-conducting fillers, dynamic scanning calorimeter (DSC), and thermo-gravimetric analyser (TGA), dynamic mechanical analyzer (DMA), and thermo-mechanical analyzer (TMA) were utilized. As the non-conducting filler content increased, CTE values decreased and storage modulus at room temperature increased. In addition, the increase in the content of filler brought about the increase of $Tg^{DSC}$ and $Tg^{TMA}$. However, the TGA behaviors stayed almost the same. Contact resistance changes were measured during reliability tests such as thermal cycling, high humidity and temperature, and high temperature at dry condition. It was observed that reliability results were significantly affected by CTEs of ACA materials especially at the thermal cycling test. Results showed that flip chip assembly using modified ACA composites with lower CTEs and higher modulus by loading non-conducting fillers exhibited better contact resistance behavior than conventional ACAs without non-conducting fillers.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.2
• /
• pp.100-109
• /
• 2008

Traffic accidents at night occur more than any other time because of improper road light facility and delineators. Therefore, cost-effective criteria of installing delineators are needed instead of expensive road light facility, especially, on rural road including light volume of traffic. This paper presents the criteria of installing 'Chevron Alignment Sign' considering driver's visual behavior characteristics and 'Raised Pavement Marker' considering critical encroachment angie of both straight section and curve one in order to reduce both the number of accidents on curve sections and the number of road encroachment accidents, respectively. The characteristics of visual behaviors can be expressed by visual angle involving curve radius and intersection angle. The estimated installing angles are $1^{\circ}{\sim}2.5^{\circ}$ by radii, which is based on changes in sensitivity across visual field by exogenous attention. Also, the raised pavement marker is installed every 2m, 3m, and 4m considering critical encroachment angles by radii.

• Journal of the Korean Society of Safety
• /
• v.32 no.2
• /
• pp.92-97
• /
• 2017

This study deals with new application method of the connecting tuned mass damper (CTMD) system for efficient vibration control of adjacent twin structures which have the same dynamic properties such as natural frequency and damping characteristics to each other. In the existing research, the vibration control of the twin structures has a limit to the application of the conventional damper-connection method of the twin structures. Due to the same frequency characteristics leading to the equally vibrating behaviors, it is impossible to apply the conventional connection method of the adjacent structures. In order to overcome these limitations induced by the symmetry of the dynamic characteristics, we propose a new CTMD-based control system that adopts the conventional connection configuration but unbalances the symmetric system by arranging the control device asymmetrically and then can finally achieve the efficient control performance. In order to demonstrate the applicability of the proposed system, numerical simulations of the optimally designed proposed system have been performed in comparison with the optimal design results of the existing independent single tuned mass damper (STMD) control system and the another optimal control system previously proposed by the same author, hereafter called CTMD-OsTMD. The comparative results of the control performances among STMD, CTMD-OsTMD and the proposed CTMD systems verified that the newly proposed control system can be a control-efficient and cost-effective system for vibration suppression of the two adjacent twin structures.

• Journal of Korea Foundry Society
• /
• v.21 no.1
• /
• pp.24-32
• /
• 2001

Recently, iron aluminides based on Fe3Al and FeAl are ordered intermetallic alloys that offer good oxidation resistance, excellent sulfidation resistance, and potentially lower cost than many high-temperature structural materials. They have better strength, elasticity to weight ratio and high temperature strength, therefore, they can be cosidered as candidate heat resistance structural materials for automobiles, ships, airplanes and spaceships applications. The changes in the mechanical properties and fracture behavior were investigated for Fe-30at.%Al-5at.%Cr alloys when Ti, Hf and Zr were added respectively. For mechanical properties such as Rockwell hardness and yield strength at room temperature, those were decreased in the case of Fe-30at.%Al-5at.%Cr alloy then increased in the case of 5at.% and 10at.% addition of Ti alone. However, Rockwell hardness and yield strength decreased again at 15%Ti then increased dramatically due to the precipitation hardening of the second phase on the specimen at 20%Ti. For fracture modes, cleavage fracture showed in the case of Fe-30at.%Al and Fe-30at.%Al-5at.%Cr alloys. As the amount of Ti addition changed cleavage to transgranular fracture and to quasi-cleavage fracture at 20%Ti. When Hf, Zr and Hf+Zr were added respectively, transgranular, cleavage and quasi-cleavage fracture were coexisted.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.12
• /
• pp.568-575
• /
• 2008

Server consolidation by sever virtualization can make one physical machine(PM) to run several virtual machines simultaneously. Although It is attractive in cost, it has complex workload behaviors. For that reason, efficient resource management method is required. Dynamic relocation of virtual machine(VM)[3,4] by live migration[1,2] is one of resource management methods. We proposed SCOA(Server Consolidation Optimizing Algorithm) : a fine-grained load balancing mechanism worked on this dynamic relocation mechanism. We could obtain accurate resource distribution information through pointed physical machines on multi dimensional resource usage coordination, so we could maintain more balanced resource state. In this paper, we show the effectiveness of our algorithm by comparison of experimental results between SCOA and sandpiper[3] by software simulation.

• Journal of KIISE:Software and Applications
• /
• v.36 no.7
• /
• pp.590-606
• /
• 2009

We present a static analyzer that detects memory leaks in C programs. It achieves relatively high accuracy at a relatively low cost on SPEC2000 benchmarks and several open-source software packages, demonstrating its practicality and competitive edge against other reported analyzers: for a set of benchmarks totaling 1,777 KLOCs, it found 332 bugs with 47 additional false positives (a 12.4% false-positive ratio), and the average analysis speed was 720 LOC/sec. We separately analyze each procedure's memory behavior into a summary that is used in analyzing its call sites. Each procedural summary is parameterized by the procedure's call context so that it can be instantiated at different call sites. What information to capture in each procedural summary has been carefully tuned so that the summary should not lose any common memory-leak-related behaviors in real-world C program. Because each procedure is summarized by conventional fixpoint iteration over the abstract semantics ('a la abstract interpretation), the analyzer naturally handles arbitrary call cycles from direct or indirect recursive calls.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.24
• /
• pp.10683-10690
• /
• 2015

The big gap between efficacy of population level prevention and expectations due to heterogeneity and complexity of cancer etiologic factors calls for selective yet personalized interventions based on effective risk assessment. This paper documents our research protocol aimed at refining and validating a two-stage and web-based cancer risk assessment tool, from a tentative one in use by an ongoing project, capable of identifying individuals at elevated risk for one or more types of the 80% leading cancers in rural China with adequate sensitivity and specificity and featuring low cost, easy application and cultural and technical sensitivity for farmers and village doctors. The protocol adopted a modified population-based case control design using 72, 000 non-patients as controls, 2, 200 cancer patients as cases, and another 600 patients as cases for external validation. Factors taken into account comprised 8 domains including diet and nutrition, risk behaviors, family history, precancerous diseases, related medical procedures, exposure to environment hazards, mood and feelings, physical activities and anthropologic and biologic factors. Modeling stresses explored various methodologies like empirical analysis, logistic regression, neuro-network analysis, decision theory and both internal and external validation using concordance statistics, predictive values, etc..

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.6
• /
• pp.543-556
• /
• 2009

Recently, NAND flash memory is being used as the swap device of virtual memory as well as the file storage of mobile systems. Since temporal locality is dominant in page references of virtual memory, LRU and its approximated CLOCK algorithms are widely used. However, cost of a write operation in flash memory is much larger than that of a read operation, and thus a page replacement algorithm should consider this factor. This paper analyzes virtual memory read/write reference patterns individually, and observes the ranking inversion problem of temporal locality in write references which is not observed in read references. With this observation, we present a new page replacement algorithm considering write frequency as well as temporal locality in estimating write reference behaviors. This new algorithm dynamically allocates memory space to read/write operations based on their reference patterns and I/O costs. Though the algorithm has no external parameter to tune, it supports optimized implementations for virtual memory systems, and also performs 20-66% better than CLOCK, CAR, and CFLRU algorithms.

• Journal of Satellite, Information and Communications
• /
• v.11 no.2
• /
• pp.8-13
• /
• 2016

A buoy is a float attached by chain to the seabed to mark channels in a harbor or underwater hazards and can be classified into two major types as autonomous buoys and fixed buoys. When there is high demand such as marking channels in a harbor, monitoring ecology of ocean and environmental monitoring of coastal areas, smart buoys are developed. The smart buoys have wireless network systems such as GPS, CDMA and ZigBee. Using the GPS techniques, location and environments of buoy can be monitored and traced. However, the GPS in fixed buoy systems has a high power consumption and cost. Using many buoys on low power ZigBee basis allows dramatic reduction of the overall power consumption. In this study, it is aimed at the design of the trackable protocol for a buoy system which has low data rate and low power consumption. The proposed protocol has advantages that it can detect abnormal movement and gather trackable information without any system changes. In the introduced protocol, additional 2 bits and join request messages are used for trackable buoy system. The behaviors of improved protocol is modeled into petri-net and proved a reachability.

• Korean Journal of Community Nutrition
• /
• v.6 no.5
• /
• pp.755-764
• /
• 2001

This study was carried out to evaluate meal management behavior of housewives and to improve their behavior by determining what problems exist. The survey was conducted using a questionnaire in Jinju from October to November in 1999. It was shown that 29.1% of housewives didn't plan food budget, whereas only 5.6% of them did. The reasons for not planning food budget were mostly due to not forming a habit(38.8%), irregularity of prices(19.9%) or irregularity of income(13.8%). The characters of planning food budget and the reasons for not planning were not affected by age, education, monthly income, family size or monthly flood cost. Only 17.8% of meal managers recorded their housekeeping in detail and 47.4% of them wrote only the important things. Recording housekeeping records was affected by age and education. It was found that most meal managers(90.8%) didn't set menu planning and they didn't fuel the need for menu planning. The frequency of food shopping was every two days(36.2%), twice a week(20.9%) or randomly(27.4%), and the places for food shopping were supermarket(49.0%) and traditional market(41.3%). Both were affected by education or age. The quality of food was the main reason(54.6%) far the selection of food shopping place. Important consideration for selection of food and meals was preference of family(47.4%) and this character was affected by education. It was shown that the score of nutrition knowledge was 7.36, and it was affected by education. The results of this study suggest that the government, educators and scientists in nutrition make efforts to develop various levels of practical education programs for meal management and nutrition depending on age, education and community using mass media.