• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.10
• /
• pp.40-48
• /
• 2008

Security of self organized mobile ad hoc networks is an important issue because administration information in the networks is managed by the constituent nodes. Especially authentication mechanism is necessary for trust setup between newly joining nodes and the network. The authentication models and protocols which are based on the wireline infrastructure could not be practical for mobile ad hoc network. Although public key algorithm-based method is widely used for authentication, it is not easy to be applied to mobile ad hoc networks because they do not have infrastructure such as centralized CA which is needed for certificate verification. In this paper, we consider the public key based random CA group method proposed in [1] to provide efficient authentication scheme to mobile ad hoc networks and analyze the performance of the method, which is then compared to the home CA method. From the analysis results, we see that the random CA method where the function of CA is distributed to some mobile nodes and the authentication information is propagated to randomly chosen CAs shows higher reliability and lower cost than home CA method.

• Progress in Medical Physics
• /
• v.14 no.3
• /
• pp.151-160
• /
• 2003

The application of more complex radiotherapy techniques using multileaf collimation (MLC), such as 3D conformal radiation therapy and intensity-modulated radiation therapy (IMRT), has increased the significance of verifying leaf position and motion. Due to thier reliability and empirical robustness, quality assurance (QA) of MLC. However easy use and the ability to provide digital data of electronic portal imaging devices (EPIDs) have attracted attention to portal films as an alternatives to films for routine qualify assurance, despite concerns about their clinical feasibility, efficacy, and the cost to benefit ratio. In this study, we developed method for daily QA of MLC using electronic portal images (EPIs). EPID availability for routine QA was verified by comparing of the portal films, which were simultaneously obtained when radiation was delivered and known prescription input to MLC controller. Specially designed two-test patterns of dynamic MLC were applied for image acquisition. Quantitative off-line analysis using an edge detection algorithm enhanced the verification procedure as well as on-line qualitative visual assessment. In conclusion, the availability of EPI was enough for daily QA of MLC leaf position with the accuracy of portal films.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.75-84
• /
• 2018

Increasing the operation rate of components and stabilizing the operation through timely management of the core parts are crucial for improving the efficiency of the railroad maintenance industry. The demand for diagnosis technology to assess the condition of rolling stock components, which employs history management and automated big data analysis, has increased to satisfy both aspects of increasing reliability and reducing the maintenance cost of the core components to cope with the trend of rapid maintenance. This study developed a big data platform-based system to manage the rolling stock component condition to acquire, process, and analyze the big data generated at onboard and wayside devices of railroad cars in real time. The system can monitor the conditions of the railroad car component and system resources in real time. The study also proposed a machine learning technique that enabled the distributed and parallel processing of the acquired big data and automatic component fault diagnosis. The test, which used the virtual instance generation system of the Amazon Web Service, proved that the algorithm applying the distributed and parallel technology decreased the runtime and confirmed the fault diagnosis model utilizing the random forest machine learning for predicting the condition of the bearing and wheel parts with 83% accuracy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.28-38
• /
• 2020

Semiconductor deposition equipment is an important example of Complex Products and Systems (CoPS) and requires in-depth understanding of user requirements. For this reason, we analyzed and compared users' and producers' perspectives on the quality attributes of semiconductor deposition equipment using the Kano model. The results show that the patterns of users' perspectives were different from those of producers. Out of 22 level-2 quality attributes, producers evaluated all 22 attributes as attractive qualities, but users evaluated only 6 as "attractive," 10 as "indifferent," 2 as "must have," and 4 as "other." Although all quality attributes were attractive for producers, only those related to reliability were attractive or must-have qualities, and all others were "indifferent." This result implies that the perspectives on quality attributes may be different between users and producers, and producers should revise their perspectives and strategies. In addition, the results support the characteristics of CoPS suggested by literature implying that performance is more important than economies of scale and cost reduction. It is suggested that producers of semiconductor deposition equipment strategize their approaches to users by considering the characteristics of CoPS.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3813-3820
• /
• 2014

Recently, with the increase in electrical consumption and the unbalanced power demand and supply, the power reserve rate is becoming smaller and the reliability of the power supply is deteriorating. Under this circumstance, a Battery Energy Storage System (BESS) is considered to be an essential countermeasure for demand side management. On the other hand, an economic evaluation is a critical issue for the introduction of a power system because the cost of BESS is quite high. Therefore, this paper presents economic evaluation method for utility use by considering the best mix method and successive approximation method, and an economic evaluation method for customer use by considering the peak shaving function based on the real time price. From a case study on a model power system and educational customer, it was confirmed that the proposed method is a practical tool for the economic analysis of BESS.

• Spatial Information Research
• /
• v.21 no.1
• /
• pp.45-52
• /
• 2013

Recently 3D surveying is recommended to manage underground facilities systematically before refilling of site operation. As the demand of realtime localization increases, cost reduction and consistent data construction which are realizable by using one man surveying method with unmanned target, are necessary for constructing DB of all sorts of the underground facilities with more speediness and correctness. This study sets a goal to develop a new type of surveying target which allows realtime localization to be performed by one man, through making an optimum reflector(triangle, quadrangle, and semispherical shape) by using the retro-reflection principle of optical prism which is being used for surveying currently. The new surveying target makes realtime surveying possible. To check reliability of its data, the accuracy is compared with surveying coordination of total station for each type in a quantitative method. In the result, the usefulness of the reflector for Underground Facilities localization is proved. Thus the foundation for underground DB construction conducted by one man is established for acquisition of 3D location information in more efficient way through using unmanned target.

• The Journal of the Convergence on Culture Technology
• /
• v.3 no.3
• /
• pp.43-49
• /
• 2017

The purpose of this study is to study the standardization of the core business process in the chemical manufacturing industry and to establish a production information management system for the purpose of establishing the production information management system that can achieve mid -To be applied. The development methodology for the standardization of the chemical manufacturing information system is applied to the production information management system development methodology (PSDM) that was developed and developed by the Agency for Technology and Information Promotion of Small and Medium Enterprises. The standardization target is the system structure, It is a core business process that becomes a skeleton during construction. In this study, the chemical manufacturing SMEs and related professional IT companies who want to build the production information management system can apply the standardized core business process more effectively to build the system more effectively, and provide ease of installation and reliability to the system, In order to maximize the utilization of processes, follow-up education training and maintenance measures are suggested. Applying the results of this study, it is possible to eliminate the unreasonable elements of the production process, improve the quality of production product, and reduce production cost.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.5
• /
• pp.421-427
• /
• 2014

Most of the structure of the real world is influenced under dynamic loads. However, when structure analysis and the structural optimization is performed, it is assumed that the static load acts on structure. When considering the actual load of dynamic loads in order to take into account a variety of loads, computational resources and time becomes a big burden in terms of cost. However, considering only the simple static load condition is not preferable for structural safety. For this reason, a lot of studies have been conducted trying to compensate this trouble by applying weight factor or replacing dynamic load with the equivalent static load. In this study, structural optimization techniques for structures under dynamic loads is proposed by applying the equivalent static load. From previous study, after determining the positions of equivalent static load based on primary degrees of freedom, the equivalent static load is calculated through the optimization process. In this process, the equivalent static load optimization of previous research is complemented by adding constraints to avoid excessively large load extraction. In numerical examples, dynamic load is applied to the truss structure and the plate. Then, the reliability of the proposed optimization technique is verified by carrying out size optimization with the equivalent static load.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.989-998
• /
• 2014

Recently volcanic eruptions and activities occurring in many parts of world have become a common global concern to many countries. The severity of these Volcanic disasters, such as of Mt. Eyjafjallajokull in Iceland and Mt. Merapi in Indonesia, have caused damages and causalities reaching astronomical levels. The infrastructure is categorized into 18sections that appropriately reflecting the survey data collected from various government agents, current inhabitant and engineers to accumulate a database on the priorities and preferences of restoring and reconstructing many kinds of infrastructure and facilities. The survey data was collect by using the "Likert 5 Scale Method" which emphasized the importance and priority of reconstruction and restoration for the specific facilities and infrastructures. The data was corrugated, organized and used in plotting and planning a strategic recovery agenda. The survey results were analyzed and verified to ensure the validity and reliability of the data by using chi-square test. This paper presents that recovery period and recovery cost to the total damage of infrastructure and facilities were used to make a recovery network with implemented construction management method. The research is expected that a more efficient and prompt recovery protocol and recovery plan can be executed and can be use as a reference and database.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.62-62
• /
• 2008

As micro-system move toward higher speed and miniaturization, requirements for embedding the passive components into printed circuit boards (PCBs) grow consistently. They should be fabricated in smaller size with maintaining and even improving the overall performance. Miniaturization potential steps from the replacement of surface-mount components and the subsequent reduction of the required wiring-board real estate. Among the embedded passive components, capacitors are most widely studied because they are the major components in terms of size and number. Embedding of passive components such as capacitors into polymer-based PCB is becoming an important strategy for electronics miniaturization, device reliability, and manufacturing cost reduction Now days, the dielectric films deposited directly on the polymer substrate are also studied widely. The processing temperature below $200^{\circ}C$ is required for polymer substrates. For a low temperature deposition, bismuth-based pyrochlore materials are known as promising candidate for capacitor $B_2Mg_{2/3}Nb_{4/3}O_7$ ($B_2MN$) multi layers were deposited on Pt/$TiO_2/SiO_2$/Si substrates by radio frequency magnetron sputtering system at room temperature. The physical and structural properties of them are investigated by SEM, AFM, TEM, XPS. The dielectric properties of MIM structured capacitors were evaluated by impedance analyzer (Agilent HP4194A). The leakage current characteristics of MIM structured capacitor were measured by semiconductor parameter analysis (Agilent HP4145B). 200 nm-thick $B_2MN$ muti layer were deposited at room temperature had capacitance density about $1{\mu}F/cm^2$ at 100kHz, dissipation factor of < 1% and dielectric constant of > 100 at 100kHz.