• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3208-3213
• /
• 2011

It has regarded an attempt to design and construct more safe structures as challenges such as fate. In order to operate public facilities safely, It can be taken how to improve the resistance to applied load by increasing the cross-section of structural members or by installing reinforcement. But inevitably such a way is accompanied by an increase of construction cost or maintenance cost. To make a cost-effective construction, Reliability-based decision analysis which can judge the adequacy of investment is suggested using statistical data of the load, resistance and the maintenance cost.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.476-479
• /
• 2010

In recent years, the deterioration of infrastructures is especially considered. In prestress concrete bridges, one of the important mechanisms of deterioration is the corrosion of the post-tensioned tendon due to environmental agents. In this study, the reliability analysis is performed for a prestress concrete box girder bridge under the pitting corrosion attack with considering the inspection and failure cost. The variation of life-time performance depending on inspection methods have to be quantified. The inspection methods with different accuracy of corrosion detection are presented and applied for model of reliability analysis. The computer program for analysis reliability index of the structure as well as updating process is obtained. An existing bridge is applied for illustrating the influence of inspection cost on the behaviors of structure. Subsequently, the benefit of inspection has shown to predict the time to failure of structure.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1132-1140
• /
• 2007

As it recently appears that Life Cycle Cost Analysis may be considered as new methodology for economic valuation of infrastructure many researches have been made to assess LCC(Life Cycle Cost) of each facility based on a reasonable methods. In general, LCC is composed of construction cost and expected maintenance repair cost. And especially, maintenance repair cost must be estimated to enhance the reliability through systematic and reasonable methods. However in Korea, because high speed railway steel bridges are recently constructed no direct statistical data are available for the account of the maintenance cost and then their maintenance characteristics are not linear yet. Therefore, the approach proposed in the paper utilizes a theoretical determination and degradation of the corrosion and fatigue of the bridges based on Rahgozar et al.(2006)'s model on fatigue notch factor considering into the corrosion to incorporate the corrosion effect into the fatigue strength reduction model. And then, the corresponding probability of failure is calculated in terms of the reliability index using S-N curve to formulate the fatigue limit state. Therefore, this paper proposes the minimum Life Cycle Cost through optimum maintenance plan analysis of high-speed railway steel bridges under construction. Finally, this paper reviews the proposed model in oder to confirm the applicability and feasibility by appling it to high speed railway steel bridges under construction

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.946-951
• /
• 2007

R&D institutes, supporting development in industry, are required to provide an economic basis of their R&D investments. In this paper, we apply prospective cost-benefit analysis to evaluate the economic impact of R&D investments. We compute main metrics with cost and benefit estimated via counter-factual evaluation model. Among many projects of KRISS to improve measurement reliability, three projects are evaluated by applying prospective cost-benefit analysis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.2
• /
• pp.56-67
• /
• 2006

The reliability and failure mode effect analysis are effective means to achieve efficient and cost-reduction design for satellite development. The failure rate of COTS (Commercial-Off-The-Shelf) parts required for reliability analysis is not usually provided from the manufacturer. Space environment factors based on empirical data obtained from MIL-HDBK-217F can be applicable to the reliability calculation. As a radiation environment factor, the occurrence rate of SEL (Single Event Latch-up) is additionally incorporated for the failure rate prediction. In this paper, the statistical reliability analysis method for low-cost small satellite using COTS parts is suggested. This statistical reliability analysis was applied to HAUSAT-2 small satellite whose electronic boxes are consisted of many COTS parts to calculate the system reliability at the end of design mission life.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.1
• /
• pp.43-48
• /
• 2009

The purpose of the this paper is to make decision of the maintenance priority of power distribution system using Time-Varying Failure Rate(TVFR) with interruption cost. This paper emphasizes the practical use of the reliability indices and interruption cost. To make a decision of maintenance priority on power distribution system equipment, the quantification of the reliability level should be represented as a cost. In this paper, the TVFR of power distribution system equipment applied in this paper utilizes analytic method to use the historical data of KEPCO. From this result, the sensitivity analysis on TVFR of equipment was done for the priority, which represents that high priority of the equipment has more effect on system reliability, such as SAIDI or SAIFI, than other equipment. By this priority, the investment plan is established. In this result, customer interruption cost(CIC) could be extracted, and CIC is used as weighting factor to consider a importance of customer. After that, the result calculated the proposal method in this paper is compared with other priority method, such as lifetime, failure rate or only sensitivity.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1090-1097
• /
• 2008

This study conducted the decision method of lateral flow in abutment structures founded on the soft soils and the reliability analysis on the foundation pile for abutment. On the basis of the results, this study proposed the reliability design model. Reliability analysis was conducted by applying second moment method, point estimation method, and expected total cost minimization to lateral movement index, lateral movement decision index, modified lateral movement decision index, and circular failure safety factor for the decision criteria of lateral flow. The reliability index by analysis method had a similar tendency each other. Point estimation method was found as a practical method in the aspect of convenience because it could conduct the analysis only by mean and standard deviation as well as the partial derivative on random variables was not necessary. Optimum reliability index and optimum safety according to increasing in failure factors and load ratio were analyzed and loads and resistance factors of the design criteria of optimum reliability were estimated. It presented rational design model which can consider construction level and stability and economical efficiency overall.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.6
• /
• pp.422-428
• /
• 2011

Optimal reliability indices were found by optimizing life cycle cost(LCC) of pier type quay walls. Failure probability of pier and shore bridge were calculated by response surface method. Then, they were used to obtain recovery cost after damage. Costs for initial construction and maintenance were also considered in finding optimal reliability indices. Target reliability indices which may be used in reliability based design were suggested by numerical examples under seismic load and ship load.

• Journal of Distribution Science
• /
• v.11 no.12
• /
• pp.39-49
• /
• 2013

Purpose - This study attempts to examine the underlying dimensions of service quality (tangibility, reliability, responsiveness, assurance, and empathy) for low-cost carriers. It subsequently seeks to determine the effect of the relationships of the dimensions of service quality, airline image, and behavioral intentions on airline services to provide adequate basic information and attributes for developing differentiated and competitive service marketing strategies. Research design, data, and methodology - The survey for this study was conducted on patrons with low-cost carrier boarding experiences in districts near universities and central businesses of Seoul and Busan from 5/10/2012 to 16/10/2012. Out of 346 questionnaires, 20 questionnaires with missing data and insincere answers were excluded for this study. Collected data were processed using SPSS 18.0, and the hypothesis was verified by analyzing the structural equation model with Lisrel 8.54. First, the frequency analysis was conducted to identify universal characteristics. Second, the exploratory factor analysis and reliability analysis were conducted to identify the accuracy of the variable measurements of the construct. Third, to assess uni-dimensionality and reliability, confirmatory factor analysis was conducted. Finally, to verify the adequacy of the research model and research hypothesis, the structural model was employed. Results - The results revealed that the factors, "tangibility, reliability, responsiveness, assurance, and empathy" were shown to be the most important dimensions of service quality for the airline image of the low-cost carrier which was consistent with previous studies. Therefore, it is fair to suggest that these verified factors are crucial attributes for the brand image of low-cost carriers. Second, as reliability and responsiveness were shown to be the most important factors for behavioral intentions, it is viable to suggest that these two attributes are crucial for the sales value of low-cost carriers. Further, it was found that the brand image of low-cost carriers was closely related to behavioral intentions. Therefore, in order to ensure the competitiveness and loyalty of patrons, the airline image value is a crucial attribute. Conclusions - The result of this study established that service quality is the most important attribute for marketing to ensure competitiveness, and intensive and differentiated service marketing play a crucial role in creating profits for low-cost carrier companies. First, as tangibility is found to be the most crucial factor in ensuring service quality, quality control and maintenance of medium and small carriers must be provided to ensure reliability, as they are the main attributes of low-cost carriers. Second, in order to promote positive behavioral intentions, it is essential to enhance the value of airline image. Third, in order to ensure competitiveness, it is imperative to carry out intensive and differentiated service marketing. Therefore, to promote the image of low-cost carriers and enhance behavioral intentions, the level of service quality must be secured by developing appropriate service improvement programs.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1994.10a
• /
• pp.152-159
• /
• 1994

One of the main objectives of the study is to propose a pratical and realistic reliability analysis by ETCM(Expected Total Cost Minimization). This study is intended to propose the safety assesment and capacity rating of existing reinforced concrete members by evaluating the safety evaluation index, that is RF(Rating Factor) from the results of the field test and inspection for 5 reinforced concrete bridges. ETCM method is used for the reliability analysis of the proposed models. The proposed reliability model and method are applied the safety assesment and system factors of reinforced concrete members.