• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.3
• /
• pp.83-92
• /
• 2004

In this thesis, a modified interpolation-2 6-bit 70MHz ADC is proposed minimizing chip area and power consumption, which includes an error correction circuit. The conventional flash ADC without interpolation comparators suffers from large chip area and more power consumption due to 2n resistors and 2n-1 comparators. Although the flash ADC with interpolation-4 comparators has small area, SNR, INL and DNL are degraded by comparison with the interpolation -2 comparator. We fabricated the proposed 6-bit ADC with interpolation-2 comparators using 0.18${\mu}{\textrm}{m}$ CMOS process. The ADC is composed of 32-resistors, 31 comparators, amplifiers, latches, error correction circuit, thermometer code detector and encoder As the results, power consumption is reduced to 40mW at 3.3V which is saving about 50% than a flash ADC without interpolation comparators, and area is reduced by 20%. SNR is increased by 75% in comparison with that of a flash ADC with interpolation-4 comparators.

• Geophysics and Geophysical Exploration
• /
• v.21 no.2
• /
• pp.103-111
• /
• 2018

The recent research aim of seismic trace interpolation is to effectively interpolate the data with spatial aliasing. Among various interpolation methods, the Matching Pursuit interpolation, that finds the proper combination of basis functions which can best recover traces, has been developed. However, this method cannot interpolate aliased data. Thus, the multi-component Matching Pursuit interpolation and moveout correction method have been proposed for interpolation of spatially aliased data. It is difficult to apply the multi-component Matching Pursuit interpolation to interpolating the OBC (Ocean Bottom Cable) data which is the multi-component data obtained at the ocean bottom because the isolation of P wave component is required in advance. Thus, in this study, we dealt with an effective single-component matching Pursuit interpolation method in OBC data where P-wave and S-wave are mixed and spatial aliasing is present. To do this, we proposed the Ricker wavelet based single-component Matching Pursuit interpolation workflow with moveoutcorrection and systematically investigated its effectiveness. In this workflow, the spatial aliasing problem is solved by applying constant value moveout correction to the data before the interpolation is performed. After finishing the interpolation, the inverse moveout correction is applied to the interpolated data using the same constant velocity. Through the application of our workflow to the synthetic OBC seismic data, we verified the effectiveness of the proposed workflow. In addition, we showed that the interpolation of field OBC data with severe spatial aliasing was successfully performed using our workflow.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.3
• /
• pp.8-8
• /
• 2004

본 논문에서는 새로운 interpolation-2 방식의 비교기 구조를 제안하여 칩 면적과 전력 소모를 줄이며 오류정정 회로를 내장하는 6-비트 70㎒ ADC를 설계하였다. Interpolation 비교기를 적용하지 않은 flash ADC의 경우 2n개의 저항과 2n -1개의 비교기가 사용되며 이는 저항의 수와 비교기의 수에 비례하여 많은 전력과 큰 면적을 필요로 하고 있다. 또한, interpolation-4 비교기를 적용한 flash ADC는 면적은 작으나 단조도, SNR, INL, DNL 특성이 떨어진다는 단점이 있었다. 본 논문에서 설계한 interpolation-2 방식의 ADC는 저항, 비교기, 앰프, 래치, 오류정정 회로, 온도계코드 디텍터와 인코더로 구성되며, 32개의 저항과 31개의 비교기를 사용하였다. 제안된 회로는 0.18㎛ CMOS 공정으로 제작되어 3.3V에서 40mW의 전력소모로 interpolation 비교기를 적용하지 않은 flash ADC에 비해 50% 개선되었으며, 칩 면적도 20% 감소되었다. 또한 노이즈에 강한 오류정정 회로가 사용되어 interpolation-4 비교기를 적용한 flash ADC 에 비해 SNR이 75% 개선된 결과를 얻었다.

• Journal of computational fluids engineering
• /
• v.7 no.2
• /
• pp.8-16
• /
• 2002

A numerical study on the use of the momentum interpolation method for flows with a large body force is presented. The inherent problems of the momentum interpolation method are discussed first. The origins of problems of the momentum interpolation methods are the validity of linear assumptions employed for the evaluation of the cell-face velocities, the enforcement of mass conservation for the cell-centered velocities and the specification of pressure and pressure correction at the boundary. Numerical experiments are performed for a typical flow involving a large body force. The numerical results are compared with those by the staggered grid method. The fact that the momentum interpolation method may result in physically unrealistic solutions is demonstrated. Numerical experiments changing the numerical grid have shown that a simple way of removing the physically unrealistic solution is a proper grid refinement where there is a large pressure gradient. An effective way of specifying the pressure and pressure correction at the boundary by a local mass conservation near the boundary is proposed, and it is shown that this method can effectively remove the inherent problem of the specification of pressure and pressure correction at the boundary when one uses the momentum interpolation method.

• KIISE Transactions on Computing Practices
• /
• v.23 no.7
• /
• pp.446-451
• /
• 2017

The statistical context-sensitive spelling correction technique in this thesis is based upon Shannon's noisy channel model. The interpolation method is used for the improvement of the correction method proposed in the paper, and the general interpolation method is to fill the middle value of the probability by (N-1)-gram and (N-2)-gram. This method is based upon the same statistical corpus. In the proposed method, interpolation is performed using the frequency information between the statistical corpus and the correction document. The advantages of using frequency of correction documents are twofold. First, the probability of the coined word existing only in the correction document can be obtained. Second, even if there are two correction candidates with ambiguous probability values, the ambiguity is solved by correcting them by referring to the correction document. The method proposed in this thesis showed better precision and recall than the existing correction model.

• Journal of the Korean Data and Information Science Society
• /
• v.17 no.4
• /
• pp.1289-1297
• /
• 2006

Before other statistical data analysis the preprocessing steps should be performed adequately to have meaningful results. These steps include processes such as baseline correction, normalization, denoising, and multiple alignment. In this paper an algorithm for baseline correction is proposed with using the piecewise cubic Hermite interpolation with block-selected points and local minima after denoising for SELDI or MALDI mass spectrometry data.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.16 no.1
• /
• pp.9-18
• /
• 2012

Objectives The aim of this study is to propose an optimized tongue colour interpolation method to achieve accurate tongue image rendering. Methods We selected 60 colour chips in the chips of DIC color guide selector, and then divided randomly the colour chips into two groups. The colour chips of a group (Gr I) were used for finding the optimized colour correction factor of error and those of the other group (Gr II) were used for verifying the correction factor. We measured colour value of the Gr I colour chips with spectrophotometer, and took the colour chips image with a digital tongue image system (DTIS). We adjusted colour correction factor of error to equal the chip colour from each method. Through that process, we obtained the optimized colour correction factor. To verify the correction factor, we measured colour value of the Gr II colour chips with a spectrophotometer, and took the colour chips image with the DTIS in the two types of colour interpolation mode (auto white balance mode and optimized colour correction factor mode). And then we calculated the CIE-$L^*ab$ colour difference (${\Delta}E$) between colour values measured with the spectrophotometer and those from images taken with the DTIS. Results In auto white balance mode, The mean ${\Delta}E$ between colour values measured with the spectrophotometer and those from images taken with the DTIS was 13.95. On the other hand, in optimized colour correction factor mode, The mean ${\Delta}E$ was 9.55. The correction rate was over 30%. Conclusions In case of interpolating colour of images taken with the DTIS, we suggest that procedure to search the optimized colour correction factor of error should be done first.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.181-190
• /
• 2013

We propose an interpolation method considering barrel distortion of fisheye lens using nearest pixels on a corrected image. The correction of barrel distortion comprises coordinate transformation and interpolation. This paper focuses on interpolation. The proposed interpolation method uses nearest four coordinates on a corrected image rather than on a distorted image unlike existing techniques. Experimental results show that both subjective and objective image qualities are improved.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.553-556
• /
• 2002

A numerical study on the use of the momentum interpolation mettled for flows with a large body force is presented. The inherent problems of the momentum interpolation method are discussed first. Numerical experiments are performed for a typical flow involving a large body force. The tact that the momentum interpolation method may result in physically unrealistic solutions is demonstrated. Numerical experiments changing the numerical grid have shown that a simple way of removing the physically unrealistic solution is a proper grid refinement where there is a large pressure gradient. An effective way of specifying the pressure and pressure correction at the boundary by a local mass conservation near the boundary is proposed, and it is shown that this method can effectively remove the inherent problem of the specification of pressure and pressure correction at the boundary when one uses the momentum interpolation method.

• Journal of Internet Computing and Services
• /
• v.13 no.3
• /
• pp.49-59
• /
• 2012

Throughout developing digital technology, reproduction of image is growing better day by day. And at the same time, diverse image editing softwares are developed to manage images easily. In the process of editing images, those programs could delete or modify EXIF files which have the original image information; therefore images without the origin source are widely spread on the web site after editing. This matter could affect analysis of images due to the distortion of originality. Especially in the court of law, the source of evidence should be expressed clearly; therefore digital image EXIF file without deletion or distortion could not be the objective evidence. In this research, we try to trace the identification of a digital camera in order to solve digital images originality, and also we focus on lens distortion correction algorism which is used in digital image processing. Lens distortion correction uses mapping algorism, and at this moment it also uses interpolation algorism to prevent aliasing artifact and reconstruction artifact. At this point interpolation shows the similar mapping pattern; therefore we want to find out the interpolation evidence. We propose a minimum filter algorism in order to detect interpolation pattern and adjust the same minimum filter coefficient in two areas; one has interpolation and the second has no interpolation. Throughout DFT, we confirm frequency character between each area. Based on this result, we make the final detection map by using differences between two areas. In other words, thereby the area which has the interpolation caused by mapping is adjusted using minimum filter for detection algorism; the second area which has no interpolation tends to different frequency character.