• 수산해양기술연구
• /
• 제40권4호
• /
• pp.319-327
• /
• 2004

本 硏究에서 試驗制作한 電子컴퍼스는 3軸磁氣센서와 傾斜角센서, 그리고 光자이로센서로 構成하였으며, 이들 각 센서의 出力特性과 性能 및 自差補正의 精度를 확인한 結果는 다음과 같다. 1) 3軸 磁氣센서의 出力特性은, X軸에서 측정된 磁界는 cos커브, Y軸에서는 -sin 커브, 그리고 Z軸에서는 그 값이 일정하게 나타나고 있어서 3軸 磁氣센서로서의 기능이 충분하다고 사료되며, 이때 出力電壓으로부터 算出된 地磁氣의 水平成分 H와 垂直成分 V는 각각 H=33.2${\mu}$T, V=23.95${\mu}$T였다. 2)光자이로 센서를 電動回轉台에 고정시키고, 시계방향으로 10$^{\circ}$/sec, 20$^{\circ}$/sec, 30$^{\circ}$/sec의 속도로 회전시켰을 때, 光자이로센서의 出力과 回轉角度와의 관계는 모두 일정한 값으로 비례함을 알 수 있다. 3) 補正前 自差는 磁界에 의해 誘導되고 있기 때문에, 최대 -25$^{\circ}$까지 크게 나타나고 있으나, 포와숀 補正法을 이용한 補正後의 자差는 ${\pm}2^{\circ}$ 범위 이내로 補正前에 비하여 自差가 현저히 작게 나타나고 있어서, 이번 硏究에서 試驗制作한 電子컴퍼스로 自動自差修正이 가능함을 확인할 수 있었다.

• 한국태양에너지학회 논문집
• /
• 제32권2호
• /
• pp.74-86
• /
• 2012

For the improvement of environmental comfort in the buildings with the blind control, the objective of this study is to prevent the direct glare caused by the daylight inlet. During the process of solar profile prediction, time are significant factors that may cause error and glare during the blind control. This research proposes and evaluates the correction and control method to minimize prediction error. For the local areas with different longitude and local standard meridian, error occurred in the process of the time conversion from local standard time to apparent solar time. In order to correct error in time conversion, apparent solar time should be recalculated after adjusting the day of year and the equation of time. To solve the problems by the potential time errors, control method is suggested to divide the control sections using the calibrated fitting-curve and this method is verified through simulations. The proposed correction and control method, which considered potential time errors by loop lop leap years, could solve the problems about direct glare caused by daylight inlet on the work-plane according to the prediction errors of solar profile. And also these methods could maximize daylight inlet and solar heat gain, because the blocked area on windows could be minimized.

• 한국정밀공학회지
• /
• 제20권6호
• /
• pp.96-104
• /
• 2003

This paper presents the measurement and correction method of PCB alignment errors for PCB screen printer. Electronic equipment is getting smaller and yet must satisfy high performance standard. Therefore, there is a great demand for PCB with high density. However conventional PCB screen printer doesn't have enough accuracy to accommodate the demand for high-resolution circuit pattern and high-density mounting capacity of electronic chips. It is because the alignment errors of PCB occur when it is loaded to the screen printer. Therefore, this study focuses on the development of the system which is able to measure and correct alignment errors with high-accuracy. An automatic optical inspection part measures the PCB alignment errors using machine vision, and the high-accuracy 3-axis stage makes correction for these errors. This system used two CCD cameras to get images of two fiducial marks of PCB. The centers of fiducial marks are obtained by using moment, gradient method. The first method is calculating the centroid by using first moment of blob, and the latter method is calculating the center of the circle whose equation is obtained by curve-fitting the boundaries of fiducial mark. The operating system used to implement the whole set-up is carried in Window 98 (or NT) environment. Finally we implemented this system to PCB screen printer.

• 디지털콘텐츠학회 논문지
• /
• 제8권4호
• /
• pp.623-629
• /
• 2007

고고학과 미술역사의 범주에서 공예품, 회화, 건축의 조각이나 부조에서 보이는 인물, 신화, 종교적이거나 역사적사건, 문양과 장식등에 묘사된 모든 것들을 이미지화 하여 분석하고 시대의 풍습과 문화 양식까지 규정 한다. 이러한 이미지자료들이 노화 나 훼손, 또는 노출이 부족하게 촬영된 경우 색조의 분포가 고르지 않아 분석이 어려운 경우가 많다. 전문적인 사진의 색조 보정에 사용되는 Levels과 Curves는 그래프와 수치 값의 미세한 조절로서 결과 값을 산출하는 탁월한 기능이 있다. 색조가 훼손된 고고학적 이미지자료에 이 기술을 적용하여 그 방법을 모색하고 이 분야의 기초적인 응용기술로서의 유용성을 살펴보았다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권4호
• /
• pp.201-207
• /
• 2001

This paper describes an automated detection algorithm of ST-T episodes using global curvature which can connect the isoelectric level in ECG and can eliminate not only the slope of ST segment, but also difference of the baseline and global curve. This above method of baseline correction is very faster than the classical baseline correction methods. The optimal values of parameters for baseline correction were found as the value having the highest detection rate of ST episode. The features as input of backpropagation Neural Network were extracted from the whole ST segment. The European ST-T database was used as training and test data. Finally, ST elevation, ST depression and normal ST were classified. The average ST episode sensitivity and predictivity were 85.42%, 80.29%, respectively. This result shows the high speed and reliability in ST episode detection. In conclusion, the proposed method showed the possibility in various applications for the Holter system.

• Journal of Korean Neurosurgical Society
• /
• 제64권6호
• /
• pp.843-852
• /
• 2021

The purpose of this review was to synthesize the research on global spinal alignment and reciprocal changes following cervical or thoracolumbar reconstruction surgery. We carried out a search of PubMed, EMBASE, and Cochrane Library for studies through May 2020, and ultimately included 11 articles. The optimal goal of a truly balanced spine is to maintain the head over the femoral heads. When spinal imbalance occurs, the human body reacts through various compensatory mechanisms to maintain the head over the pelvis and to retain a horizontal gaze. Historically, deformity correction has focused on correcting scoliosis and preventing scoliotic curve progression. Following substantial correction of a spinal deformity, reciprocal changes take place in the flexible segments proximal and distal to the area of correction. Restoration of lumbar lordosis following surgery to correct a thoracolumbar deformity induces reciprocal changes in T1 slope, cervical lordosis, pelvic shift, and lower extremity parameters. Patients with cervical kyphosis exhibit different patterns of reciprocal changes depending on whether they have head-balanced or trunk-balanced kyphosis. These reciprocal changes should be considered to in order to prevent secondary spine disorders. We emphasize the importance of evaluating the global spinal alignment to assess postoperative changes.

• 비파괴검사학회지
• /
• 제23권6호
• /
• pp.605-615
• /
• 2003

In practice, it is common to manufacture reference blocks containing simple reflectors to obtain distance-amplitude correction (DAC) curves. However, the construction or DAC curves in this manner requires the use of a large number of specimens with appropriate curvatures and reference reflectors located at various depths. Therefore, less costly and quantitative procedures are strongly needed. To address such a need, in this study, we have developed model-based transfer curves to relate a DAC curve obtained in a particular reference configuration with that for a completely different configuration. An example of transferring DAC curves, using the proposed transfer curves, is given.

• 대한전자공학회논문지
• /
• 제22권4호
• /
• pp.51-58
• /
• 1985

Ion-implanted E-IGFET의 도핑 profile을 임의로 가정하여 threshold 전압을 구하였고. short-channoel에 적용할 때 correction factor K의 개념을 사용하였다. Threshold전압의 이론치는 실험치와 잘 일치하였고, 또한 I-V특성도 실험치와 잘 일치하였다. 아울러 이 program을 package화 하여 실용화시켰다.

• 한국태양에너지학회 논문집
• /
• 제29권5호
• /
• pp.73-80
• /
• 2009

A tidal current turbine is designed and analyzed numerically by using blade element momentum theory. The rated power has a limitation because the diameter of the tidal current turbine cannot exceed the depth of sea water. This study investigates a horizontal axis tidal-current turbine with a rated power of 500 kW. NACA-6 series laminar foil shape is used for basic airfoil along the blade span. The distributions of chord length and twist angle along the blade span are obtained from the hydrodynamic optimization procedure. Prandtl's tip loss correction and angle of attack correction considering the three-dimensional effect are applied for this study. The power coefficient curve shows maximum peak at the rated tip speed ratio of 6.0, and the maximum torque coefficient is developed at the tip speed ratio of 4. The drag coefficient reaches about 0.85 at the design tip speed ratio.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2006년도 하계 학술대회 논문집
• /
• pp.25-28
• /
• 2006

In this paper, we say the shading correction system supporting multi-resolution for camera. The shading effect is caused by non-uniform illumination, non-uniform camera sensitivity, or even dirt and dust on glass (lens) surfaces. In general this shading effect is undesirable [1]. Eliminating it is frequently necessary for subsequent processing and especially when quantitative microscopy is the fine goal. The proposed system is available on thirty nine kinds of image resolutions scanned by interlaced and progressive type. Moreover, the system is using various continuous quadratic equations instead of using the piece-wise linear curve which is composed of multiple line segments. Finally, the system could correct the correct effect without discontinuity in any image resolution. The proposed system is also experimentally demonstrated with Xilinx Virtex FPGA XCV2000E- 6BG5560 and the TV set.