• Journal of Information Science Theory and Practice
• /
• 제2권4호
• /
• pp.20-30
• /
• 2014

This study examines the foremost concerns related to most noted research performance index. The most popular and widely acceptable h-index underestimates the highly visible scientist, the middle order group, due to citation distribution issues. The study addresses this issue and uses 'Corrected Quality Ratio' (CQ) to check the implicit underpinnings as evident in h-index. CQ helps to incorporate the aspects of a good research performance indicator. This simple revision performs more intimately and logically to gauge the broader research impact for all groups and highly visible scientists with less statistical error.

• Journal of Information Processing Systems
• /
• 제18권2호
• /
• pp.223-234
• /
• 2022

The evaluation of the print quality of 3D printing has traditionally relied on manual work using dimensional measurements. However, the dimensional measurement method has an error value that depends on the person who measures it. Therefore, we propose the design of a new print quality measurement method that can be automatically measured using the field-of-view (FOV) model and the intersection over union (IoU) technique. First, the height information of the modeling is acquired from a camera; the output is measured by a sensor; and the images of the top and isometric views are acquired from the FOV model. The height information calculates the height ratio by calculating the percentage of modeling and output, and compares the 2D contour of the object on the image using the FOV model. The contour of the object is obtained from the image for 2D contour comparison and the IoU is calculated by comparing the areas of the contour regions. The accuracy of the automated measurement technique for determining, which derives the print quality value was calculated by averaging the IoU value corrected by the measurement error and the height ratio value.

• 산업경영시스템학회지
• /
• 제30권2호
• /
• pp.37-43
• /
• 2007

ANOVA is widely used for measurement system analysis. It assumes that the measurement error is normally distributed, which may not be seen in certain industrial cases. In this study, the exact and bootstrap confidence intervals for precision-to-tolerance ratio (PTR) are obtained for the cases where the measurement errors are normally and non-normally distributed and the reproducibility variation can be ignored. Lognormal and gamma distributions are considered for non-normal measurement errors. It is assumed that the quality characteristics have the same distributions of the measurement errors. Three different bootstrap methods of SB (Standard Bootstrap), PB (Percentile Bootstrap), and BCPB (Biased-Corrected Percentile Bootstrap) are used to obtain bootstrap confidence intervals for PTR. Based on a coverage proportion of PTR, a comparative study of exact and bootstrap methods is performed. Simulation results show that, for non-normal measurement error cases, the bootstrap methods of SB and BCPB are superior to the exact one.

• 한국식품영양학회지
• /
• 제14권4호
• /
• pp.311-316
• /
• 2001

This study was designed to investigate the effective ratio of healthy bread wish green tea powder. The weight. volume, and colon difference of bread with various contents of green tea powder were measured. And the picture of bread and the panel test were taken. To avoid the decrease of volume, the experiment was taken with active gluten. The weight to bread was increased and the volume was decreased significantly according to increase of green tea powder ratio. But, the volume of the group with active gluten(3%+ and 4%+) was higher than that of the group with green tea powder 2%. That is which the correction of the volute was taken by active gluten in green tea powder bread. In the result of panel test and volume measurement. addition of 3% green tea powder was appropriate, and the addition of active gluten corrected the decrease of volume. Therefore. using the green tea powder, the diversity of bread by functionality, nutritional composition. taste, color. flavor of green tea powder can be developed. This result will support the background the development of green tea bread of good quality.

• 한국치위생학회지
• /
• 제22권2호
• /
• pp.107-115
• /
• 2022

Objectives: This study aimed to examine the effects of dietary protein intake and quality on periodontal disease in Korean adults. Methods: The data used for analysis were obtained from the 7th Korean National Health and Nutrition Examination Survey (2016-2018). Data were analyzed using chi-square and t-test. Additionally, multiple logistic regression analysis was performed to assess the association between dietary protein intake and quality and periodontal disease. Statistical significance level was set at <0.05. Results: Multiple logistic regression analysis of dietary protein intake and periodontal disease in the model adjusted for socioeconomic factors showed that were significantly related to the Q1 (odds ratio [OR]: 1.18, 95% confidence interval [CI]: 1.01-1.39). However, this correlation was not significant in the model in which all variables were corrected. Moreover, analysis of the dietary protein quality and periodontal disease in model 4, which was adjusted for socioeconomic variables, showed that were significantly related to the low score (OR: 1.13, 95% CI: 1.00-1.27). Conclusions: The results showed a significant association between periodontal disease and poor intake and quality of dietary protein in the Korean adult population.

• Journal of the Optical Society of Korea
• /
• 제18권2호
• /
• pp.110-117
• /
• 2014

In this study, we objectively determined whether the ReSTOR as a multifocal IOL (intraocular lens) has a multifocal function compared to the IQ as a monofocal IOL in vivo by OQAS (Optical Quality Analysis System). Eighteen patients who had cataract surgery with implantation of ReSTOR (27 eyes) and 15 patients with IQ (21 eyes), were included inthis study. Uncorrected distance visual acuity (UCDVA), corrected distance visual acuity (CDVA), uncorrected near visual acuity (UCNVA)and distance corrected near visual acuity (DCNVA) were measured. After setting the artificial pupil size to 3 mm, we performed 'Optical quality'. We inputted defocus diopters of (objective spherical refraction)(far), (objective spherical refraction-1.25 D)(intermediate),(objective spherical refraction-2.5 D)(near), and (objective spherical refraction-3.5 D)(very near) into 'selected spherical refraction' simulating the optical quality at far, intermediate, and near distance. We changed the pupil size to 5 mm and repeated the same measurements. The UCDVA and CDVA did not show significant differences between the 2 groups. But, the UCNVA and DCNVA of the ReSTOR group were better than those of the IQ group (p=0.000, p=0.000). For 3 mm pupil, at far distance, modulation transfer function (MTF) cut off and point spread function (PSF) width at 50% of ReSTOR were worse than those of IQ (p=0.039, p=0.020). At intermediate distance, MTF cut off, Strehl ratio and PSF width at 50% of ReSTOR were worse than those of IQ (p=0.001, p=0.001, p=0.000). At near distance, MTF cut off of ReSTOR was worse than that of IQ (p=0.033). At very near distance, MTF cut off and Strehl ratio of ReSTOR were worse than those of IQ (p=0.002, p=0.002), but PSF width at 50% of ReSTOR was better than that of IQ. For 5 mm pupil, most parameters at each distance, there was no significant difference between the 2 groups. Only PSF width at 50% of ReSTOR were worse than those of IQ at intermediate distance (p=0.013). It was impossible to show the multifocal function of ReSTOR compared to the IQ byOQAS.

• 드라이브 ㆍ 컨트롤
• /
• 제19권2호
• /
• pp.17-26
• /
• 2022

Recently, automatic transmissions caused a good improvement in the shift quality of a forklift. An advanced shift control algorithm, which was based on TCU firmware, was applied with embedded control technology and microcontrollers. In the clutch-to-clutch shifting, one friction element is released and the other friction element is activated. During this process, if the release and application timings are not synchronized, an overrun or tie-up occurs and ultimately leads to a shift shock. The TCU, which measures only the speed of the forklift, inevitably applies the open-loop shift control. In this situation, the speed ratio does not change during the clutch fill. The torque phase occurs until the clutch is disengaged. In this study, an offline shift logic of the learning control was proposed. It induced a synchronous shift when the learning control progressed. During this process, the reference current trajectory of the release clutch was corrected and applied to the next upshift. We considered the results of the overrun/tie-up characteristics of the upshift performed immediately before. The vehicle test proved that the deviation in shift quality, which was caused by the difference in the mechanical characteristics of the clutch, could be improved by the learning control.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2002년도 춘계 국제 학술대회
• /
• pp.84-90
• /
• 2002

In 1995 we licensed pyrolysis gas melting technology of indirect heating type (using kiln) from Siemens AG, and built its demonstration facility in 1998 at Clean-Park-East of Fukuoka City to demonstrate the technology for municipal solid waste (MSW). In 1997 we were awarded an order from Kanemura Co., Ltd. to build a pyrolysis gas melting and power generation plant, specifically for treating residue from car shredder. The latter was launched in 1998, and is currently in commercial operation. The operation of these plants have proven the following facts. (1) The system is capable for performing a stable operation with a wide variety of waste. (2) Pyrolysis is achieved steadily regardless of the variation in the quality of waste. (3) The system can be operated under low excess air ratio (1.2∼1.3). (4) The concentration of dioxins at the furnace outlet is 0.062ng-TEQ/㎥$\_$N/, and 0.002ng-TEQ/㎥$\_$N/, at the stack. (the value is corrected to dryO$_2$ 12％) (5) The purity of recovered metals exceeds 90%.

• 대한영양사협회학술지
• /
• 제26권2호
• /
• pp.85-100
• /
• 2020

Eating alone has recently become a very common dietary pattern in modern society. This study investigated the relationship between the frequency of eating alone and health related issues including chronic diseases, depression, and the quality of life (QOL). The 2016 Korea National Health and Nutrition Examination Survey provided the basic data for this study. According to the general analysis of 4,910 adults aged over 19 years or older, the average age in the 'eating alone' group was significantly higher (P<0.001), and the ratio of single-person households was significantly higher as the number of times of eating alone increased (P<0.001). Analysis of the relationship between the risk factors of metabolic syndrome according to the number of times eating alone, using logistic regression analysis, showed that the odds ratio of metabolic syndrome in the 'two times eating alone a day' group was approximately 1.3 times higher (OR=1.275) after being corrected for gender, age and energy intake. For the 'three times eating alone a day' group, the metabolic syndrome odds ratio was higher in all models except for model 1 and 5 (P for trend<0.05). The prevalence of depression using patient health questionnaire-9 (PHQ-9) was higher as the number of eating alone increased, and the QOL was inversly related with the number of meals eating alone (P for trend<0.01). We hope the results of this study will raise awareness of the health of those people who eat alone and lay the groundwork for individuals who eat alone and gain social attention.

• 지구물리와물리탐사
• /
• 제18권4호
• /
• pp.181-196
• /
• 2015

3.5 kHz 또는 첩(chirp) 천부해저 지층탐사는 해양지질 조사나 엔지니어링 탐사에 널리 사용되고 있다. 그러나 해상에서의 너울은 탐사자료의 품질을 저하시킨다. 이와 같은 너울의 영향을 보정함으로써 연속성이 향상된 탐사자료를 얻을 수 있다. 정확한 해저면의 위치 선정은 너울영향 보정에 매우 중요하다. 이 연구에서는 원자료와 이를 엔벨로프 또는 에너지비율자료로 변형시킨 자료들에 대해 최대 진폭값의 일정 기준을 초과하는 지점을 선정하는 방법으로 해저면 위치 선정을 시도하였다. 그러나 파도의 잡음으로 인하여 해저면 신호가 분명하지 않은 품질이 낮은 자료에서는 개별 트레이스에서의 자동적인 해저면 위치 선정이 어려웠다. 이 연구에서는 이전 트레이스에서 구한 해저면 평균값을 고려하여 해저면 선정범위 내에서 해저면을 선정하는 방법과, 선정 결과의 신뢰도가 낮은 경우에는 이를 보정에서 제외하는 방법을 사용함으로써 품질이 낮은 자료의 해저면 선정에서도 만족스러운 결과를 얻었다. 개별 트레이스에서 해저면을 선정할 때에는 에너지비율자료를 사용한 경우에 오류가 가장 적었으며, 이전 트레이스 해저면 평균값을 고려하는 방법에서는 원자료를 직접 사용한 경우에 보정결과가 비교적 양호하였다.