• Journal of Korea Multimedia Society
• /
• v.13 no.7
• /
• pp.1076-1087
• /
• 2010

Together with a new advent of embedded processor developed to support specific application area and it evolution, a new research of software development to support the embedded processor and its commercial challenge has been revitalized. Retargetability is typically achieved by providing target machine information, ADL, as input. The ADLs are used to specify processor and memory architectures and generate software toolkit including compiler, simulator, assembler, profiler, and debugger. The EXPRESSION ADL follows a mixed level approach-it can capture both the structure and behavior supporting a natural specification of the programmable architectures consisting of processor cores, coprocessors, and memories. And it was originally designed to capture processor/memory architectures and generate software toolkit to enable compiler-in-the-loop exploration of SoC architecture. In this paper, we designed the class-based ADL based on the EXPRESSION ADL to promote the write-ability, extensibility and verified the validation of grammar. For this works, we defined 6 core classes and generated the EXPRESSION's compiler and simulator through the MIPS R4000 description.

• The Journal of the Korea Contents Association
• /
• v.18 no.10
• /
• pp.361-367
• /
• 2018

The purpose of this study was to evaluate the influence of hydrofluoric acid etching treatment on the bonding strength of yttria-stabilized tetragonal zirconia polycrystal(Y-TZP). Four groups of zirconia-resin cement specimens were prepared; 1) ZGS group (zirconia, no treatment), 2) ZGSH group (zirconia, hydrofluoric acid etching treatment) 3) H-ZGS group (Hybrid zirconia, no treatment) 4) H-ZGSH group (Hybrid zirconia, hydrofluoric acid etching treatment). The shear bond strength between zirconia and porcelain was measured using a Instron Universal Testing Machine(Model DBBP-500, Instron Corporation, Kyonggi, Korea). Data were statistically analyzed using independent t-test and two-way ANOVA(${\alpha}=0.05$). The ceramic-resin cement bonding strength was affected by hydrofluoric acid etching treatment(p<0.05). Digital microscope examination of the fracture surface showed mixed failures with adhesive and cohesive types in hydrofluoric acid etching treatment with treated zirconia and hybrid zirconia groups.

• The KIPS Transactions:PartB
• /
• v.9B no.1
• /
• pp.29-34
• /
• 2002

Fingerprint recognition technology was studied by classification and matching. In general, there are five different classifications left loop, right loop, whore, arch, and tented-arch. These classifications are used to determine which class an individual's fingerprint belong to, thereby identifying the individual's fingerprint pattern. The result of this classification, which is sent to the large fingerprint database as an index, helps reduce the matching time and enhance the accuracy of fingerprint matching. The existing fingerprint classification method relies on the number and location of cores and delta points called singular points. The drawback of this method is the lack of accuracy stemming from the classification difficulty involving unclear and/or partially-erased fingerprints. The current paper presents an efficient classification method to rectify the problem associated with identifying Singular points from unclear fingerprints. This method, which is based on Gabor filter's unique characteristics for magnifying directional patterns and frequency range selections, improves fingerprint classification accuracy significantly. In this paper, this method is described and its test result is presented for verification.

• The KIPS Transactions:PartA
• /
• v.10A no.4
• /
• pp.389-396
• /
• 2003

InfiniBand technology is being accepted as the future system interconnect to serve as the high-end enterprise fabric for cluster computing. This paper presents the design and implementation of the InfiniBand system interconnect, focusing on an InfiniBand host channel adapter (HCA) based on dual ARM9 processor cores The HCA is an SoC tailed KinCA which connects a host node onto the InfiniBand network both in hardware and in software. Since the ARM9 processor core does not provide necessary features for multiprocessor configuration, novel inter-processor communication and interrupt mechanisms between the two processors were designed and embedded within the KinCA chip. Kinch was fabricated as a 564-pin enhanced BGA (Bail Grid Array) device using 0.18${\mu}{\textrm}{m}$ CMOS technology Mounted on host nodes, it provides 10 Gbps outbound and inbound channels for transmit and receive, respectively, resulting in a high-performance cluster system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.9
• /
• pp.814-821
• /
• 2012

We propose a network processor called an OmniFlow processor capable of wire-speed flow management by a hardware-based flow admission control(FAC) in this paper. Because the OmniFlow processor can set up and release a wire-speed connection for flows, the update period of flows can be set to a short time, and only active flows can be effectively managed by terminating a flow that does not have a packet transmitted within this period. Therefore, the FAC can be used to provide a reliable transmission of UDP as well as TCP applications. This processor is fabricated in 65nm CMOS technology, and total gate count is 25 million. It has 40 Gb/s throughput performance in using the 32 RISC cores when maximum operating frequency is 555MHz.

• Tunnel and Underground Space
• /
• v.24 no.3
• /
• pp.212-223
• /
• 2014

In this study, the stability analyses for metal mine roadways at a great depth were performed. In-situ stress measurements using hydrofracturing, numerous laboratory tests for rock cores and GSI & RMR classifications were conducted in order to find the physical properties of both intact rock and in-situ rock mass distributed in the studied metal mine. Through the scenario analysis and probabilistic assessment on the results of rock mass classification, the in-situ ground conditions of mine roadways were divided into the best, the average and the worst cases, respectively. The roadway stabilities corresponding to the respective conditions were assessed by way of the elasto-plastic analysis. In addition, the appropriate roadway shapes and the support patterns were examined through the numerical analyses considering the blast damaged zone around roadway. It was finally shown to be necessary to reduce the radius of roadway roof curvature and/or to install the crown reinforcement in order to enhance the stability of studied mine roadways.

• Journal of the Semiconductor & Display Technology
• /
• v.4 no.1 s.10
• /
• pp.9-16
• /
• 2005

In this paper, with loosely coupled transformer Relies-parallel resonant type DC/DC converter is analyzed and adopted to the power source of a TFLM(Transverse Flux Linear Motor). To get more efficient operating mode of the series-parallel resonant type DC/DC converter, theoretical analysis using normalized parameters are accepted. The analysis includes a specially made ferrite transformer with two separately wound half cores in order to evaluate analytically and experimentally the changes in magnetizing the leakage fluxes and inductances caused by the distance between the halves. The proposed converter must be operated in switching Pattern III among the three switching patterns for the Zero Voltage Switching operation. According to Pulse Frequency Modulation(PFM) control method, the output voltage of the proposed circuit can be controlled. The results of the theoretical development are compared with practical measurements from a prototype system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.294-298
• /
• 2008

Snow cover is a potential water resource for later spring and summer seasons as well as a thermal mirror with high reflectivity causing decreases of surface air temperature during cold winter seasons. In this study, current and future changes in Northern Hemisphere snow extent and their potential linkages with atmospheric circulation are examined. The NOAA AVHRR visible snow extent (1967-2006) data as well as observational (NCEP-DOE 1979-2006) and modeled (GFDL 2.1 2081-2100) pressure and surface air temperature data are used. Analyses of observational data demonstrate that the snow extent in meteorological spring (March to April) and summer (June to August) has significantly decreased since the late 1980s. The offset of snow seasons (the timing of snow melt in spring) have also significantly advanced particularly in Europe, East Asia, and northwestern North America. Analyses of pressure fields reveal that the spatial patterns of the earlier snow melt are associated with changes in atmospheric circulation such as the Arctic Oscillation (AO). In the positive winter AO years, multiple positive pressure departure cores in the upper troposphere (200hPa) are observed over the mid-latitude regions from March to mid-April, while a negative pressure departure core (70hPa) prevails over the Arctic Ocean. The reversed anomaly patterns related to later snow melt occur in negative winter AO years. The comparison between current and future thermal spring onsets suggest that snow melt patterns will intensify with larger greenhouse gas emissions, indicating earlier hydrological spring onset.

• Food Science and Preservation
• /
• v.5 no.3
• /
• pp.275-280
• /
• 1998

The effects of Poria cores powder addition on bread making were investigated by evaluation of dough rasing power, rheological properties of dough by farinograph and extensograph color and sensory quality. As increment of Poria cocos powder, dough rasing power and extensibility were decreased but water absorption rate and resistance were increased. Time for dough formation, stability and v/v point of dough were increased when 5 and 10 percent of Poria cocos powder were added. Color of bread wasn't significantly different when Poria cocos powder was added up to 10 percent. Overall acceptance by sensory evaluation was the best when 5 percent of Poria cocos powder was added, tut there are no significant difference among breads which were made with various mixing rates of Poria cocos powder.

• Korean Journal of Materials Research
• /
• v.14 no.11
• /
• pp.764-768
• /
• 2004

Perovskite Pb(Mn_{1/3}Sbu_{2/3})O_2-Pb(Zr,Ti)O_3\;(PMS-PZT) was prepared and ZnO doping effects on its piezoelectric properties were investigated. Pyrochlore phase was not identified in the PMS-PZT ceramics with $0\sim5\;mol\%$ ZnO sintered at $1100^{\circ}C$ for 2 hrs, and maximum sintered density of $7.92 g/cm^3$ was obtained. Piezoelectric charge constant and voltage constant increased to $359{\times}10^{-12}\;C/N\;and\;22.5{\times}10^{-13}\;Vm/N$, respectively, with increasing ZnO content. Mechanical quality factor reduced considerably with increasing ZnO content. When the ZnO content was 3 $mol\%$, electromechanical coupling factor and relative dielectric constant showed maximum values of $56\%$ and 1727, respectively. This should be evaluated by complicated variations of sintered density, tetragonality of lattice, grain size, and A-site vacancy generated by ZnO addition and $Zn^{2+}$ substitution.