• Nuclear Engineering and Technology
• /
• v.29 no.5
• /
• pp.399-405
• /
• 1997

In this study a new phase separated spectral analysis algorithm is proposed to identify CSB vibration mode directly from ex-core neutron signals. Ex-core neutron signals can be decomposed into the global, core support barrel (CSB) beam mode, and CSB shell mode components by the new phase separation algorithm based on the characteristics of Fourier transform. By using the proposed algorithm and the conventional spectral analysis the vibration mode of the CSB and the fuel assembly of Ulchin-1 NPP were identified from measured ex-core neutron signals.

• Nuclear Engineering and Technology
• /
• v.44 no.7
• /
• pp.727-734
• /
• 2012

A new advanced safety feature of DVI+ (Direct Vessel Injection Plus) for the APR+ (Advanced Power Reactor Plus), to mitigate the ECC (Emergency Core Cooling) bypass fraction and to prevent switching an ECC outlet to a break flow inlet during a DVI line break, is presented for an advanced DVI system. In the current DVI system, the ECC water injected into the downcomer is easily shifted to the broken cold leg by a high steam cross flow which comes from the intact cold legs during the late reflood phase of a LBLOCA (Large Break Loss Of Coolant Accident)For the new DVI+ system, an ECBD (Emergency Core Barrel Duct) is installed on the outside of a core barrel cylinder. The ECBD has a gap (From the core barrel wall to the ECBD inner wall to the radial direction) of 3/25~7/25 of the downcomer annulus gap. The DVI nozzle and the ECBD are only connected by the ECC water jet, which is called a hydrodynamic water bridge, during the ECC injection period. Otherwise these two components are disconnected from each other without any pipes inside the downcomer. The ECBD is an ECC downward isolation flow sub-channel which protects the ECC water from the high speed steam crossflow in the downcomer annulus during a LOCA event. The injected ECC water flows downward into the lower downcomer through the ECBD without a strong entrainment to a steam cross flow. The outer downcomer annulus of the ECBD is the major steam flow zone coming from the intact cold leg during a LBLOCA. During a DVI line break, the separated DVI nozzle and ECBD have the effect of preventing the level of the cooling water from being lowered in the downcomer due to an inlet-outlet reverse phenomenon at the lowest position of the outlet of the ECBD.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.895-900
• /
• 2020

In this paper, BSPE replaced the existing multiplication algorithm that consumes a lot of power. Hardware resources are reduced by using a bit-serial multiplier, and variable integer data is used to reduce memory usage. In addition, MOA resource usage and power usage were reduced by applying LOA (Lower-part OR Approximation) to MOA (Multi Operand Adder) used to add partial sums. Therefore, compared to the existing MBS (Multiplication by Barrel Shifter), hardware resource reduction of 44% and power consumption of 42% were reduced. Also, we propose a hardware architecture design for BSPE Core.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.12-18
• /
• 2009

In this paper, for reducing the assembly torque of subminiature plastic barrel and base which are the essential parts of mobile phone camera module, the high-precision system for inspecting the screw shape of core, electrode and injection molding products was developed. For realization of inspection process, the inspection parameters for evaluating the manufacturing quality were selected and the measurement methods of selected parameters were developed. Finally, the inspection system which is possible to be applied to the field were fabricated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.217-222
• /
• 1997

Free vibration analysis of a Core Support Barrel shell structure is studied through experimental and finite element analysis methods. The structure is considered to be a thick shell with the ratio of thickness to radius 3/10. Finite element model is established by solid model with brick elements. Modal analyses are performed with respect to the various ratios of thickness to radius with clamped-free and free-free boundary conditions. Experimental test is done to find out how well the results are agreed with those of analysis. The comparison of the results from experiment and analysis shows a good agreement between them in general.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.283-288
• /
• 1996

Core support barrel (CSB) assembly is one of the most important reactor internals structures supporting and protecting the nuclear core during normal operation and faulted events. For Yonggwang 3 and 4 (YGN 3&4), the adequacy of the analytical response prediction of reactor internals for flow induced vibration was demonstrated through the comprehensive vibration assessment program (CVAP) performed during hot functional test. Besides, the vibration characteristics of the CSB of operating nuclear power plant can be examined via the excore neutron noise monitoring signal. In this paper data from YGN 4 analyses, CVAP, and neutron noise monitoring system are compared and evaluated. In general, the results are comparable each other and conservative enough to ensure sufficient design margin and structural integrity. Further investigations on the modelling and analyses procedure are recommended to utilize the experimental results to the maximum extent. And collection of the neutron noise data is desired to serve as a baseline information.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.159-160
• /
• 2004

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.402-403
• /
• 2013

• Nuclear Engineering and Technology
• /
• v.25 no.2
• /
• pp.204-214
• /
• 1993

Work on fracture mechanics has provided a technical basis for elimination of main coolant loop double ended guillotine breaks from the structural design basis of reactor coolant system. Without main coolant loop pipe breaks, the tributary pipe breaks must be considered as design bases until further fracture mechanics work could eliminate some of these breaks from design consideration. This paper determines the core support barrel shell responses for the 3 inch pressurizer spray line nozzle break which is expected to be the only inlet break remaining in the primary side after leak-before-break evaluation is extended to smaller size pipes in the near future. The responses are compared with those due to 14 inch safety injection nozzle break and main coolant loop pipe break. The results show that, when the leak-before-break concept is applied to the primary side piping systems with a diameter of 10 inches or over, the core support barrel shell responses due to pipe breaks in the primary side are negligible for the faulted condition design.

• Nuclear Engineering and Technology
• /
• v.20 no.4
• /
• pp.253-264
• /
• 1988

Our experience of neutron noise analysis in French-type 900 MWe pressurized water reactor (PWR) is presented. Neutron noise analysis is based on the technique of interpreting the signal fluctuations of ex-core detectors caused by core reactivity changes and neutron attenuation due to lateral core motion. It also provides advantages over deterministic dynamic-testing techniques because existing plant instrumentation can be utilized and normal operation of the plant is not disturbed. The data of this paper were obtained in the ULJIN unit 1 reactor during the start-up test period and the statistical descriptors, useful for our purpose, are power spectral density (PSD), coherence function (CF), and phase difference between detectors. It is found that core support barrel (CSB) motions induced by coolant flow forces and pressure pulsations in a reactor vessel were indentified around 8 Hz of frequency.