• Journal of environmental and Sanitary engineering
• /
• v.21 no.1 s.59
• /
• pp.58-65
• /
• 2006

This study is measured in at ozone concentrated places in school and outside of school where places that use copy machine and the others do not use one. Library copy room, Search room, Y-Copy, J-copy, R-shop are the places using copy machines and Search room, K-apt, J-billiard hall are the opposite. The measurement was held three times a day-the morning, the afternoon and the evening-once for each at indoor and outdoor. 8 places were lower than domestic ozone concentration standard(0.06ppm). The indoor ozone concentration average was the highest in Search room of school and was the lowest in Library restroom. The outdoor ozone concentration average was the highest in J-billiard hall.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.10
• /
• pp.52-63
• /
• 1998

In this paper, several improvements to a copy network proposed previously for multicast packet switching are described. The improvements provide a solution to some problems inherent in multicasting. The input fairness problem caused by overf low is solved by a dynamic starting point decider(DSD), which can calculate running sums of copy requests starting from any input port. The starting point is changed adaptively in every time slot based on both the fill level of the input buffers in current time slot and the overflow situations of the previous time slot. Using the fill level of the conventional network. The DSD also provides the function of regulating overall copy requests according to the amount of input traffics. This is an essential function in improving overall throughputs of the copy networks. The throughput of a multicast switch can be improved substantially if partial service of copy request is implemented when overflow occurs. Call-splitting can also be implemented by the DSD in a straightforward manner. The hardware for the DSD is derived with the objective of simple architectures for the high speed operation. Simulation study of the copy network under various traffic conditions is presented to evaluate its performance.

• Genomics & Informatics
• /
• v.6 no.3
• /
• pp.126-129
• /
• 2008

The robust identification and comprehensive profiling of copy number alterations (CNAs) is highly challenging. The amount of data obtained from high-throughput technologies such as array-based comparative genomic hybridization is often too large and it is required to develop a comprehensive and versatile tool for the detection and visualization of CNAs in a genome-wide scale. With this respective, we introduce a software framework, CGHscape that was originally developed to explore the CNAs for the study of copy number variation (CNV) or tumor biology. As a standalone program, CGHscape can be easily installed and run in Microsoft Windows platform. With a user-friendly interface, CGHscape provides a method for data smoothing to cope with the intrinsic noise of array data and CNA detection based on SW-ARRAY algorithm. The analysis results can be demonstrated as log2 plots for individual chromosomes or genomic distribution of identified CNAs. With extended applicability, CGHscape can be used for the initial screening and visualization of CNAs facilitating the cataloguing and characterizing chromosomal alterations of a cohort of samples.

• Korean Journal of Digital Imaging in Medicine
• /
• v.13 no.3
• /
• pp.127-132
• /
• 2011

This is to improve the complicate process of the existing CD copy flow in Department of Radiology. It is also to improve the medical service of the hospital to secure private information of patients. Survey: The patients who ask for CD copies in the Department of Radiology of this hospital(for 6 months in 2010). Time: Comparing the total amount of time of the previous and the modified CD copy flow. Using the SPSS 12.0 program for testing significance of independent two-samples t-test. Private information: Introducing the identification-system based on the medical law to supplement the security of personal information of patients. There was manifold complaints due to receipt and issuing the prescription in Admission and Discharging office and outpatient department. The time has been approximately 50% reduced from 70 mistunes to 32 mistunes due to simplifying the routes. The security of the personal information has been supplemented by let patients submit documentary evidence based on the medical law. The service in the hospital has been improved as a result of simplifying the whole process of the routes and receipt process. Therefore, the each stage of waiting time has been decreased. In addition, the personal information of the patients has been more secured.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.10
• /
• pp.125-133
• /
• 2020

In this paper, we design 4-layer TCP/IP that utilizes minimal memory and processor resources in Internet of Things(IoT) systems. The TCP/IP designed in this paper has the following characteristics. First, memory resource is minimized by using minimal memory allocation. Second, processor resource is minimized by using minimal memory copy. Third, the execution time of the TCP/IP can be completed in a deterministic time. Fourth, there is no memory leak problem. The standard in minimal resources for memory and processor derived in this paper can be used to check whether the network subsystems of the already implemented IoT systems are efficiently implemented. As the result of measuring the amount of memory allocation and copy of the network subsystem of Zephyr, an open source IoT kernel recently released by the Linux Foundation, we found that it was bigger than the standard in minimal resources derived in this paper. The network subsystem of Zephyr was improved according to the design proposed in this paper, confirming that the amount of memory allocation and copy were decreased by about 39% and 67%, respectively, and the execution time was also reduced by about 28%.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.9 no.1
• /
• pp.82-90
• /
• 2000

In esthetic dentistry, color and strength are basic requirements for the long-term success of the restorative materials. Several all ceramic systems have been introduced to esthetic dentistry recently. However, the inherent natures of ceramic material, the application of all ceramic system is mainly limited to single tooth restorations. With the improvement of material science, the alumina and zirconia/alumina composite power and block can be applied to fabrication of all ceramic bridges. The conventional inceram core fabrication takes time for sintering however, the shaping of block with a copy milling machine can reduce great amount of time. The block is easy to manipulate and prepare in any shape accurately. This clinical report demonstrates the application of all ceramic ante rior 3 unit bridge with a alumina block in CELAY system.

• Biomedical Science Letters
• /
• v.15 no.3
• /
• pp.229-232
• /
• 2009

DNA isolation for PCR-based short tandem repeat (STR) analysis is essential to recover high yields of amplifiable DNA from low copy number (LCN) DNA samples. There are different methods developed for DNA extraction from the small bloodstain and gloves, commonly found at crime scenes. In order to obtain STR profiles from LCN DNA samples, DNA extraction protocols, namely the automated $iPrep^{TM}$ $ChargeSwitch^{(R)}$ method, the automated $QIAcube^{TM}$ method, the automated $Maxwell^{(R)}$ 16 DNA $IQ^{TM}$ Resin method, and the manual $QIAamp^{(R)}$ DNA Micro Kit method, were evaluated. Extracted DNA was quantified by the $Quantifiler^{TM}$ Human DNA Quantification Kit and DNA profiled by $AmpFISTR^{(R)}$ $Identifiler^{(R)}$ Kit. Results were compared based on the amount of DNA obtained and the completeness of the STR profiles produced. The automated $iPrep^{TM}$ $ChargeSwitch^{(R)}$ and $QIAcube^{TM}$ methoas produced reproducible DNA of sufficient quantity and quality trom the dried blood spot. This two automated methods showed a quantity and quality comparable to those of the forensic manual standard protocols normally used in our laboratory. In our hands, the automated DNA extraction method is another obvious choice when the forensic case sample available is bloodstain. The findings of this study indicate that the manual simple modified $QIAamp^{(R)}$ DNA Micro Kit method is best method to recover high yields of amplifiable DNA from the numerous potential sources of LCN DNA samples.

• Journal of Broadcast Engineering
• /
• v.14 no.6
• /
• pp.661-675
• /
• 2009

The carelessly and illegally copied contents are raising serious social problem as internet and multimedia technologies are advancing. Therefore, development of video copy detection system must be settled without delay. In this paper, we propose the hierarchical video copy detection method that estimates similarity using statistical characteristics between original video and manipulated(transformed) copy video. We rank according to luminance value of video to be robust to spacial transformation, and choose similar videos categorized as candidate segments in huge amount of database to reduce processing time and complexity. The copy videos generally insert black area in the edge of the image, so we remove rig black area and decide copy or not by using statistical characteristics of original video and copied video with center part of frame that contains important information of video. Experiment results show that the proposed method has similar keyframe accuracy to reference method, but we use less memory to save feature information than reference's, because the number of keyframes is less 61% than that of reference's. Also, the proposed method detects if the video is copied or not efficiently despite expansive spatial transformations such as blurring, contrast change, zoom in, zoom out, aspect ratio change, and caption insertion.

• Particle and aerosol research
• /
• v.6 no.3
• /
• pp.123-129
• /
• 2010

As the indoor activity increases in recent years, the indoor air quality becomes more important. One of the major contaminants in office space is the copy machines and the laser based printers. These devices usually emit nano-particles and chemical species that may give some health effect. The amount of particles generated by the printers and copy machines depend on printer models, printing speed, toners, papers, humidity and so on. To evaluate the emission rate of nano-particles from Laser Printers, the mass concentration measurement method has been used (BAM, 2004). However, the mass concentration measurement method for nano-particles is tedious and time consuming. Therefore, for the development of a new nano-particle counting method, the nano-particle emission characteristics and size distributions are evaluated.

• Korean Journal of Digital Imaging in Medicine
• /
• v.13 no.4
• /
• pp.171-175
• /
• 2011

Server and Pi view management, external image and internal image Copy Import business in PACS room is through the medical assistance. Import and Copy, and in particular the number of cases is increasing the number of import is a fast growing trend. Although the increase in workload With limited human resources to increase business efficiency so Remote system is using PACS room. This remote system will want to evaluate the effectiveness of using the service. Amount of data each 437.5 MB, Copy and Import time is to compare and evaluate sees by use 1 PC. 4 PC, 4 PC+ remote system. The use of the remote system before the January 2010 to June daily average waiting time and the use of the remote system after the January 2011 to June compared to a daily average patient waiting time, evaluate. Using the remote system in January 2011 to June Find out the average remote utilization. The biggest difference on the four copy and eight continued, Were performed two times faster by use 4 PC+ remote system than use 4 PC and four times faster than use 1 PC. Before using the remote system, the daily average wait time is 14.5 minutes after using the daily average 10.2 minutes, waiting time 30% of the existing waiting time was 4.3 minutes, to reduce. Using the remote system in January 2011 to June the average daily number of cases is 107 number and The number of remote and on average 35 cases with 32% in a day remote usage. The use of the remote system to Import, CD Copy and greatly increase the efficiency of their time could be. Hours due to efficiency could also reduce customer waiting time. As a result, the manpower and the use of a remote system over time to maximize efficiency in business hours, work was evaluated by.