• Analytical Science and Technology
• /
• v.31 no.6
• /
• pp.240-246
• /
• 2018

The present study analyzed standard samples of three types of aluminum matrix certified reference materials (CRM) using GD-MS. Calibration curves were constructed for 13 elements (Mg, Si, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Ga, Sn, and Pb), with the slope representing the relative sensitivity factor (RSF). The x- and y-axes of the calibration curve represented ion beam ratio (IBR) and the authenticated value of the standard sample, respectively. In order to evaluate precision and linearity of the calibration curve, RSD and the coefficient of determination were calculated. Curve RSD for every element reflected high precision (within 10 %). For most elements, the coefficient of determination was ${\geq}0.99$, indicating excellent linearity. However, vanadium, nickel, and gallium curves exhibited relatively low linearity (0.90~0.95), likely due to their narrow concentration ranges. Standard RSF was calculated using the slope of the curve generated for three types of CRM. Despite vanadium, nickel, and gallium exhibiting low coefficients of determination, their standard RSF resembled that of the three types of CRM. Therefore, the RSF method may be used for element quantitation. Standard iron matrix samples were analyzed to verify the applicability of the aluminum matrix standard RSF, as well as to calculate the RSD-estimated error of the measured value relative to the actual standard value. Six elements (Al, Si, V, Cr, Mn, and Ni) exhibited an RSD of approximately 30 %, while the RSD of Cu was 77 %. In general, Cu isotopes are subject to interference: $^{63}Cu$ to $^{54}Fe^{2+}-^{36}Ar$ and $^{65}Cu$ to $^{56}Fe-Al^{3+}$ interference. Thus, the influence of these impurities may have contributed to the high RSD value observed for Cu. To reliably identify copper, the resolution should be set at ${\geq}8000$. However, high resolutions are inappropriate for analyzing trace elements, as it lowers ion permeability. In conclusion, quantitation of even relatively low amounts of six elements (Al, Si, V, Cr, Mn, and Ni) is possible using this method.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.3
• /
• pp.132-149
• /
• 2011

In ancient period, a variety of inorganic or organic pigments had been used as colorants in various kinds of religious and secular paintings such as tomb paintings and wall and scroll paintings in buddhist temples, and danchung(cosmic patterns) for the surface of wooden buildings. This study discusses the results obtained from an analysis of the pigments on the wall paintings of Yeongsanjeon(Hall of Vulture Peak) in Tongdo temple by a qualitative analysis using a field-XRF. The results can be briefly summarized as follows. Firstly, assuming from the major components examined from F-XRF analysis, raw materials of pigment of each color are: red to be Cinnabar(HgS) or Hematite($Fe_2O_3$); white to be White Lead[$2PbCO_3{\cdot}Pb(OH)_2$] in most cases and Calcite($CaCO_3$) or Chalk($CaCO_3$), Kaolin($Al2O_3{\cdot}SiO_2{\cdot}4H_2O$) in some cases; yellow to be Yellow Ocher[$FeO(OH){\cdot}nH_2O$]; black to be carbon(C); green on the painted surface to be Celadonite[$K(Mg,Fe^{2+})(Fe^{3+},Al)(Si_4O_{10})(OH)_2$] in most cases; dark green on the halo of figures to be Malachite[$CuCO_3{\cdot}Cu(OH)_2$], Copper Green[$2CuO{\cdot}CO_2{\cdot}H_2O$] or Atacamite[$Cu_2Cl(OH)_3$]. Secondly, incarnadine and pink were made by mixing with more than two pigments such as red and white for making various tone of colors. The qualitative analysis of pigments on the wall paintings of Yeongsanjeon, in conclusion, displays that the all pigments for ancient periods are inorganis pigments. However, it has the limitation to identify a definite kinds of mineral for each pigment because it was not possible to collect samples from cultural heritage for conducting a crystalline analysis of XRD.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.1
• /
• pp.122-147
• /
• 2012

The Four-guardian statues in Song-gwang buddhist temple, Suncheon, Korea, have been remade in AD 1628 and have been repaired and repainted over several times since then. Therefore, the study of the pigments applied on the statues can provide good chance for investigation about pigments used in the late Chosun Period. Pigments on fragments from Gwang-mok(Virupaksha), one of the Four-guardian statues, have been analyzed by optical microscope, SEM-EDX and XRD in order to identify the components and compounds. Six types of materials were found from the fragments, which are soil layer with brown clay band, soil layer containing a lot of fibers, Korean paper with loose texture, Korean paper with dense texture, silk, and hemp textile. Presumably, the soil layer which have brown clay band is basis layer and the other layers are repaired layers. From comparative study for the components of the pigments, applied on upper and lower parts of the repaired layers, we have concluded that those repaired layers had been applied on the statue by the following order; basis layer ${\rightarrow}$ Korean paper with loose texture ${\rightarrow}$ soil containing a lot of fibers ${\rightarrow}$ silk ${\rightarrow}$ hemp textile and Korean paper with dense texture. In addition, the years that those materials were applied on the statue have been estimated as 1720~1891, 1926, 1946 and 1976, respectively. The distinct features of each age are as the following; lead white and copper chloride hydroxide are major white and green pigments before 1891, zinc white, barium white, emerald green, and ultramarine blue appear after 1926 and titanium white uprises around 1976. Our result presented here, study on pigments applied on traditional statues over several different periods, will provide good database for future study on pigments used for traditional painting in Buddist temples and Dancheong.

• Journal of the Korean Society of Radiology
• /
• v.13 no.4
• /
• pp.653-659
• /
• 2019

The purpose of this study is to measure the (air dose rate of radiation dose) the discharged patient who was administrated high dose $^{131}I$ treatment, and to predict exposure radiation dose in public person. The dosimetric evaluation was performed according to the distance and angle using three copper rings in 30 patients who were treated with over 200mCi high dose Iodine therapy. The two observer were measured using a GM surverymeter with 8 point azimuth angle and three difference distance 50, 100, 150cm for precise radion dose measurement. We set up three predictive simulations to calculate the exposure dose based on this data. The most highest radiation dose rate was showed measuring angle $0^{\circ}$ at the height of 1m. The each distance average dose rate was used the azimuth angle average value of radiation dose rate. The maximum values of the external radiation dose rate depending on the distance were $214{\pm}16.5$, $59{\pm}9.1$ and $38{\pm}5.8{\mu}Sv/h$ at 50, 100, 150cm, respectively. If high dose Iodine treatment patient moves 5 hours using public transportation, an unspecified person in a side seat at 50cm is exposed 1.14 mSv radiation dose. A person who cares for 4days at a distance of 1 meter from a patient wearing a urine bag receives a maximum radiation dose of 6.5mSv. The maximum dose of radiation that a guardian can receive is 1.08mSv at a distance of 1.5m for 7days. The annual radiation dose limit is exceeded in a short time when applied the our developed radiation dose predictive modeling on the general public person who was around the patients with Iodine therapy. This study can be helpful in suggesting a reasonable guideline of the general public person protection system after discharge of high dose Iodine administered patients.

• Korean Journal of Heritage: History & Science
• /
• v.40
• /
• pp.357-386
• /
• 2007

At present, thirteen Buddhist bells of Unified Silla are known to the world: Six in Korea, five in Japan and two other bells, and three out of them are impossible to make out its original form. Therefore, we divided the form of Unified Silla Buddhist bells based on the ten other bells, and we tried out to prove the manufacturing technology by the comparison of the research material of Uncheon-dong bell and existing research materials of other bells, in other to find their linkage based on the alloy elemental composition. We divided Unified Silla Buddhist bell into two types: Type I has symmetric apsaras and regular patterns on its face and it was made in early Silla period; type II has asymmetric apsaras and irregular pattern arrangement and made in late Silla period. In particular, Uncheon-dong Buddhist bells is very similar to Komyoji[光明寺] temple bell from ninth century in Japan. It is peculiar that the apsaras on Uncheon-dong bell play vertical music instruments that are never seen in Unified Silla Buddhist bell. Most of Unified Silla Buddhist bell are compounded with Cu-Sn or Cu-Sn-Pb system. From eighth and ninth century, bells were cast with even composition of copper, tin and lead, and the bronze alloy ratio was similar to the record in Gogonggi[考工記], Jurye[周禮], a book from ancient China. Particularly, Uncheon-dong bell is in a rare case of Cu-Sn-Pb-As system. As had been rarely used in Unified Silla Buddhist bells, so we presented the relative research materials. As has the same nature as Pb. Because As easily volatilize at high temperature, it is hard to use. But it has its merit of solidity and durability. Pb enhances fluidity and thereby expresses the patterns more distinct; As makes the bell stronger. The result of lead isotope ratio could not exactly reveal a concrete producing center. However, over the analysis of our samples, hereby we suggest Uncheon-dong bell was made of materials from just one ore deposit.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.3
• /
• pp.853-865
• /
• 2019

In this study, the skin permeability was measured by adding skin penetrating peptides, arginine oligomers R4(tetra-D-arginine), R6(hexa-D-arginine) to little skin-permeable wrinkle improvement peptides GHK, GHK-Cu, and Pal-GHK liposomes, and the results were analyzed by the following six cases. (1) In cases where only wrinkle improvement peptides GHK, GHK-Cu, and Pal-GHK were contained liposomes; the final cumulative permeations in 24 hours were 6.05%, 7.4%, and 8.83% respectively. (2) In cases where arginine oligomers R4, R6 were added to GHK liposomes; the final cumulative permeations in 24 hours were 13.63% and 7.68%. (3) In cases where R4, R6 were added to GHK-Cu liposomes; the final cumulative permeations in 24 hours were 15.46% and 8.64%. (4) In cases where R4, R6 were added to Pal-GHK liposomes; the final cumulative permeations in 24 hours were 16.9% and 10.67%. (5) In cases where R4 were added to GHK, GHK-Cu, and Pal-GHK liposomes; the final cumulative permeations in 24 hours were 13.63%, 15.46%, and 16.9% respectively. (6) In cases where R6 were added to GHK, GHK-Cu, and Pal-GHK liposomes; the final cumulative permeations in 24 hours were 7.68%, 8.64%, and 10.67% respectively. This experiment showed that skin absorption of GHK was increased by copper ion (Cu2+) and palmitic acid and skin absorption of wrinkle improvement peptides was enhanced by cell penetrating peptides, and R4 showed higher effect than R6 in GHK, GHK-Cu and Pal-GHK. Through this process, we propose broad use and application in wrinkle improvement functional cosmetics by presenting the optimal conditions for increasing skin absorption of GHK, GHK-Cu, thus maximizing its efficacy.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.6
• /
• pp.75-84
• /
• 2018

The inclusive playground is a playground where disabled children and non-disabled children can play together, not a playground for the disabled. It started with the change of social awareness of the citizenship rights of disabled people in the 1960s and the resulting playgrounds. Since then, inclusive playgrounds have been developed in many countries, and these are organized in the form by guidelines. In Korea, social interest in inclusive playgrounds is increasing, but there are no systematic guidelines in Korea, and the application of overseas cases or guidelines is limited. The purpose of this study is to classify the concept of inclusive playgrounds and design guidelines, that were previously presented in inclusive playground design guideline of various countries and analyze the characteristics of, design scope, and design principles, and provide a basic framework for creating guidelines. The purpose of the design guideline was to present specific numerical values to the inclusive playground design guidelines, to link with academic research and industrial products, to present pursuit values, and to expand the value of pursuing design methods. The contents were covered by scope, conceptualization, principles of design and design process, design guidelines, and checklists. Most of the guideline covers specific autonomous governments or countries that can apply the related systems or laws, but the composition of the detailed contents is different. The guiding value of inclusive playgrounds presented in each guideline is not a playground for the disabled but a playground for all, and some guidelines refer to the difficulty in playgrounds considering non-disabled children. Based on these concepts, design guidelines are presented in each guideline. Improving the accessibility in design principles is a common theme and adds to the principles of safety, independence, convenience, and playability. None of the guidelines do not provide design guidelines. Although there is a difference in the degree and method of specificity provided by each of the guidelines, the design guidelines can be generally summarized as space, copper line, and unit facilities. As mentioned in many guidelines, an inclusive playground is not only a playground for children with disabilities. Therefore, in the design guidelines, it is also important to the support play of children with disabilities and to induce inclusive play. The design guidelines presented in the guideline can be rearranged into three stages of 'supporting the play of children with disabilities', 'securing the dimensions and materials of spaces and facilities', 'adding auxiliary devices' and 'designing new facilities'. There are three design guidelines for inducing inclusive play. First, by creating various difficulty levels and intersecting spaces, children with various abilities can play with each other, and at the same time, they can interact witheach other. Second, all children can cooperate and play without distinction between children with disabilities and non-disabled children. Finally, the guardian provides the conditions for efficient support so that the disabled child can fully enjoy the inclusive playground.

• Journal of Food Hygiene and Safety
• /
• v.36 no.1
• /
• pp.51-59
• /
• 2021

In this study we analyzed the elution rates of 11 metals from 82 metallic kitchen utensils purchased in the market. The elution frequency of the 11 types of metals was iron > aluminum > chromium, nickel > zinc > copper > lead > arsenic > antimony > stannum > cadmium. For metallic kitchen utensils, the elution rate of heavy metals was 7.3-93.9%, and the average elution concentration was 0.001-13.473 mg/L. The average elution concentration of heavy metals was ranged between none-detected (N. D.) to 30.473 mg/L for non-coated kitchen utensils and 0.000-10.005 mg/L for coated kitchen utensils. The average elution concentration of metals from domestic kitchen utensils ranged from 0.001-25.145 mg/L, and from 0.000-33.518 mg/L for imported kitchen utensils. In particular, aluminum was found to be high in domestic kitchen utensils while iron was high in imported kitchen utensils. The average elution concentration of heavy metals was N.D.-2.670 mg/L for stainless steel, N.D.- 31.575 mg/L for aluminum, and N.D.-307.737 mg/L for iron. The amount of transition to food after cooking was investigated.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.2
• /
• pp.4-21
• /
• 2021

A stone mold from the Sabi period of Baekje was excavated at the western tombs in Neungsan-ri, Buyeo where there was a recent excavation survey (2016). It was believed and reported that such stone molds were used for copper needles during the early Iron Age; however, a close re-examination of the form revealed that they were used for bifid ornamental hairpins. Given its casting form, the stone mold of Neungsan-ri is estimated to have been used to make bifid ornamental hairpins in a ∩ shape, narrowing down toward the tip. It is considered an artifact of the Goryeo dynasty. The stone used to make the bifid ornamental hairpin mold of Neungsan-ri was chlorite-schist, the principal minerals of which include chlorite, amphibole, and talc. Similar rocks are in nearby Buyeo (Oesan-myeon), Cheongyang, Gongju, and Yesan. They are mainly found between Jiseon-ri, Oesan-myeon, Buyeo, Sucheol-ri, Yesane-up, and Yesan. Nearly 70 bifid ornamental hairpins from the Goryeo dynasty were excavated at Neungsan-ri, Buyeo and the surrounding areas. Among them, the bronze ones excavated from the tombs of Songguk-ri, Buyeo are estimated to have been made using this mold as they closely resemble the Neungsan-ri mold. Stone was likely the preferred material for molds to make bronze artifacts as it was easy to sink a die. Regarding the bifid ornamental hairpin cast excavated in Neungsan-ri, they obtained stones in nearby areas 20~50km from their location, made bronze artifacts, and distributed them to nearby sites during the Goryeo dynasty. These artifacts suggest that the casting technology of using a stone mold was still employed then.

• (The)Study of the Eastern Classic
• /
• no.73
• /
• pp.153-184
• /
• 2018

The aim of this thesis was to examine the circumstances that led up to successful coin use across the entire nation in 1678 (the $4^{th}$ year of King Sukjong's reign), during the Joseon Dynasty. To this end, this thesis analysed the Sa-Mouk(事目, Provisions) that contained the institutional protocol for coin circulation, implemented by King Hyojong and the statesman Kim Youk(金堉) who had practical experience in these matters over the ten years of King Hyojong's reign(1649-1659). To regulate the problematic wide circulation of coarse cotton cloth as currency in the market of 1650 (the $1^{st}$ year of King Hyojong's reign), prohibition measures were implemented. Besides the superficial justification given for these measures(i.e., that the market price was disturbed by the use of coarse cotton cloth), there was another purpose to prohibiting the circulation of cotton cloth as money, following the standard ruled by the government: the state aimed to ensure momentum for the upcoming coin circulation policy, by strengthening its control of the current economy. In 1651 (the $2^{nd}$ year of King Hyojong's reign), the government fully cracked down on the use of coarse cotton cloth as currency, and simultaneously implemented its coin circulation policy in the Pyeongan(平安) region. The pretext for this policy was to raise finances to support people who were starving as a result of poor harvests and famine. People who received coins from government officials could purchase food in the market, and the coin circulation policy was judged to be successful. Subsequently, to extend coin circulation further throughout the region, the Sa-Mouk for Seoul was established. The Sa-Mouk included stipulations regarding the use of coin in transactions and for government expenditure; it aimed thereby to enhance the national policy's market credit. The hasty implementation of the policy for the expansion of coin circulation caused some problems that required its modification. In 1652 (the $3^{rd}$ year of King Hyojong's reign), coin circulation was increased to encompass the Gyeonggi(京畿) region, and some of the tax that had been paid in rice was now paid in coin. However, coins were in short supply, since there was insufficient copper, the main material used in coin production, and the policy faced a significant limitation. Therefore, in 1655(the $6^{th}$ year of King Hyojong's reign), a new Sa-Mouk for coin circulation was established. This Sa-Mouk included specifications regarding the determination of coin values based on rice and silver, and mandated the wide spread installation of stores for exchanging spot goods for coins throughout the region in which coins were circulating. This policy's objective was to secure stability for the national economy by further regulating coin circulation. The sustained implementation of the coin circulation policy for ten years by King Hyojong and the statesman Kim Youk offered the government an opportunity to accumulate experience in coin circulation in the market, and also to learn from institutional trial and error. This may have been one of the contributing factors to the nation-wide coin circulation that was established in 1678. The objective of the policy implemented during King Hyojong's reign was not to meet the market's requirements, but rather to ensure the preservation of the national economy, and this misjudgement constituted the policy's key limitation. At this time, the government urgently needed to secure finances to cope with the war against China's Qing Dynasty.