• Journal of electromagnetic engineering and science
• /
• 제3권1호
• /
• pp.12-16
• /
• 2003

In this paper, low noise amplifiers with coplanar waveguide structure are presented for Wireless LAN data communication application. For comparison of microwave performance, LNAs of cascode type and balanced type using cascode cell with the same substrate and same bias conditions are designed and implemented. A cascode type of LNA shows the gain of 12.45 ㏈, input return loss of 11.63 ㏈, and noise figure of 1.52㏈. A balanced type of LNA using cascode cell shows the gain of 6.58 ㏈, input return loss of 16.6 ㏈, and noise figure of 1.18 ㏈.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.63-68
• /
• 2005

In this paper, Coplanar Waveguide(CPW) low-pass filter with the spurious-reduced is designed by using Defected Ground Structures(DGS). Two different LPF unit cells and DGS pattern are combined to reduce the spurious. In comparison to a conventional step impedance LPF, the size of proposed LPF as 17.2mm*6.8mm is several times smaller. The simulation and measurements confirm that spurious characteristics is presented less than -30dB($S_{21}$) to three times cut off frequency.

• Journal of electromagnetic engineering and science
• /
• 제10권3호
• /
• pp.117-120
• /
• 2010

A novel stepped-patch loaded coplanar waveguide(SPLCPW) structure is proposed and applied to the design of a low-pass filter(LPF). The stepped-patch loaded on the opposite side of the CPW plane is shown to provide a shunt-connected series L-C resonance, which is dual to that of a conventional CPW defected ground structure(DGS). As a simple example of the proposed SPLCPW circuit, a 3-pole SPLCPW LPF is designed and good results are obtained.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권4호
• /
• pp.483-490
• /
• 2011

본 논문에서는 주기적 접지구조(PAGS)를 이용하여 실리콘 RFIC 반도체 기판상에 다단 임피던 스변환기를 제작 평가하였다. 제작된 임피던스변환기의 면적은 종래의 약 8.7 %인 0.026 $mm^2$이며, 8 ~ 49.5 GHz의 범위에서 양호한 RF특성을 보여주었다.

• Journal of Electrical Engineering and Technology
• /
• 제12권4호
• /
• pp.1600-1604
• /
• 2017

A new Complex Image Method based on Genetic Algorithm (GA) is proposed to calculate the Green's functions of CPW (coplanar waveguide)-type microwave components and antennas. The closed-forms of the spectral-domain integrals are obtained by the GA, avoiding the conventional procedures of the tedious linear algebra and the sampling conditions sensitive to the complex-variable sampling paths adopted in the Prony's and GPOF methods. The proposed method is compared with the numerical Sommerfeld Integral, which results in good agreement.

• 조명전기설비학회논문지
• /
• 제20권9호
• /
• pp.40-44
• /
• 2006

This study investigated a new tuneable bandpass filter based on coplanar waveguide coupled line structure, and using the varactor diode for tuning the center frequency of the filter. The filter was designed by a commercial simulator and had a tuning range of 180[MHz] from 0.95[GHz] to 1.13[GHz]. The filter acceptable values regarding the insertion loss was less than 3[dB] and its return loss greater than 12[dB]. The figure of merit of the implemented tuneable filter increased with the reverse bias voltage up to 14[V] on the varactor diode. The proposed filter has a promising future as it can be used in integration processes and in various materials as substrate.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.968-971
• /
• 2001

In this paper, internal antennas for IMT-2000 handset(1.92∼2.17 GHz) were designed to be capable of being mounted on the circuit-board with a CPW(coplanar waveguide) feeding structure. The chip antennas were miniaturized to a greater extent by fabricating multilayer high dielectric ceramic($\varepsilon$$\sub$r/=7.8) hexahedron. The proposed antennas has λ/4 monopole element with helical structure in the multilayer dielectric ceramic hexahedron. The simulated and measured results were invesgated with width, length, and thickness of helical structure in the hexahedron.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.370-374
• /
• 2002

This paper describes the design and fabrication of distributed analog phase shifter circuit. The phase shifter consist of coplanar waveguide(CPW) lines that are periodically loaded with voltage tunable (Ba,Sr)TiO$_3$ thin film interdigital(IDT) capacitors deposited by the pulsed laser deposition(PLD) on (001) MgO single crystals. The phase velocity on these IDT loaded CPW lines is a function of applied bias voltage, thus resulting in analog phase shifting circuits. The measured differential phase shift is 48$^{\circ}$ and the insertion loss decreases from -5㏈ to -3㏈ with increasing bias voltage from 0 to 40 V at 100㎐.

• International Journal of Contents
• /
• 제8권3호
• /
• pp.100-104
• /
• 2012

In this paper, a unit cell for low pass filter design by using composite right and left-handed transmission line in conductor-backed coplanar waveguide is proposed. The characteristics of the unit cell are analyzed in order to design a low pass filter in small sizes. By changing the sizes of the unit cell, the parameters of right-handed and left-handed immittance components are changed and the desired characteristics of the unit cell are achieved. The equivalent circuit of the unit cell is extracted and analyzed either. As a result, the simulation results of the unit cell and the equivalent circuit are almost identified. The movement and energy distributions of electromagnetic field are shown to confirm the property of the unit cell. In the end, a low pass filter is demonstrated by cascading three proposed unit cells, which shows cutoff frequency of 1.53GHz and deep attenuation from 2.23GHz to 4.49GHz lower than -50dB.

• 전자공학회논문지A
• /
• 제32A권9호
• /
• pp.1250-1256
• /
• 1995

In this paper, shielded suspended coplanar waveguide with multiple anisotropic substrates is analyzed by the point matching method in the quasi-TEM mode appoximation. The characteristic impedance and the effective dielectric constant are calculated by varying the width of center strip and gap between the center strip and the ground strip. And also the characteristic parameters are calculated as a function of ${\varepsilon}_{x}/{\varepsilon}_{y}$) and a permitivity of the support substrate. Approaching the ground strip to infinity, the values of the characteristic parameters are found to be in good agreement with the other results by variational method.