• 전자공학회논문지B
• /
• 제33B권7호
• /
• pp.40-50
• /
• 1996

An unified compliant control algorithm to regulate the force by dual arms is proposed, where tow arms are treated as one arm in a kinematic viewpoint. The force error calculated form the information of two force/torque sensors attached to the end of each arm is transferred to minimum actuator coordinates, and then is distributed to total system actuator coordinates. The position adjustment at the total actuator coordinates is computed based on the effective computed based on the effective compliance matrix with respect to total actuator coordinates, which is obtained by coordinate transformation between the task coordinates and the total actuator coordinates. An experiment is carried out for dual arms with asymmetric kinematic structure to control an interaction force between manipulators and the environment. The performances of the proposed control algorithm are experimentally compared to those of dual arms employing master/slave scheme. The proposed compliant control algorithm not only ouperforms other algorithms, but also can be treated as an unified approach n the sense that it can be applied to arbitrary dual arm systems with general kinematic structures.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.79-81
• /
• 1998

STATCOM can compensate industrial load's reactive power and filter the harmonic of nonlinear load's with the rapid dynamic response. In this paper, STATCOM is modelled to synchronous rotating coordinate by circuit dq transformation, and space vector PWM method is applied for broad voltage modulation. Also predict current controller is used for harmonic current filtering.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -2
• /
• pp.877-880
• /
• 2000

In this paper, we develop an algorithm of soccer image sequences mosaicing using reverse affine transform. The continuous mosaic images of soccer ground field allows the user/viewer to view a “wide picture” of the player’s actions The first step of our algorithm is to automatic detection and tracking player, ball and some lines such as center circle, sideline, penalty line and so on. For this purpose, we use the ground field extraction algorithm using color information and player and line detection algorithm using four P-rules and two L-rules. The second step is Affine transform to map the points from image to model coordinate using predefined and pre-detected four points. General Affine transformation has many holes in target image. In order to delete these holes, we use reverse Affine transform. We tested our method in real image sequence and the experimental results are given.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.528-531
• /
• 2004

For a simple one-dimensional ignition problem a mathematical model is described to investigate the difficulties in numerical simulations. Some computation results are obtained and comparison is made with analytical solution. Discussions are made on topics such as 1) coordinate transformation, 2) gas-phase and solid-phase analysis; (divergence form of the governing system, a finite-volume discretization, implicit time integration, upwind split flux, spatial accuracy improvement are described. Mass, reagent mass, and energy conservations are solved.), and 3) method to determine quantities on the burning surface (matching). Results obtained for small values of the non-dimensional pressure show a steady-combustion and good agreement with the analytical solution. Numerical instability appeared for larger values of the pressure, discussion on the cause of the problem is made. This effort is a part of a study of flame spread phenomena on solid propellant surface.

• 대한원격탐사학회지
• /
• 제21권5호
• /
• pp.433-443
• /
• 2005

This paper show that, without installation of expensive VR (Virtual Reality) program, the sharing information is possible through posting three-dimensional road structures on the web, and avoiding the conventional top-down decision making method, fast bottom-up communication is possible base on the Virtual GIS (Geographic Information System). In this paper, using Viewpoint Scene Builder, internet-based software, the transformation was conducted to give pertinent type for web posting. In order to use the completed route at the scene builder, the output with ASCII Export is required, and ASE (ASCII Scene Export) contains the property information including the coordinate and frame of mesh vertex. Through in advance recognition of the problems regarding route design and petition due to environmental rights infringement, the time and cost due to design alteration can be reduced. It's difficult to provide VR based on the internet because file that embodied with internet GIS was complicated and its capacity comes to scores of mega-bites. But, this study provides VR with internet according to a basis by simplification of files.

• Advances in Computational Design
• /
• 제4권4호
• /
• pp.397-413
• /
• 2019

In this paper, static nonlinear analysis of gable frame is performed using OpenSees software. Both geometric and material nonlinearities are considered in analyses. To consider large displacements, co-rotational coordinate transformation is used in software. The effects of symmetric and asymmetric support conditions including clamped and simple supports are studied. On the other hand, the material nonlinearity is reflected on analyses using Giuffre-Menegotto-Pinto steel material. Note that strain hardening characteristics are also considered in this model. Moreover, I-shaped cross-section is assumed for all members. The results are provided for different geometry properties of gable frame including shallow and deep inclined roof. It should be added that buckling and post-buckling behaviors of gable frame are investigated using related equilibrium paths. A comparison study is also implemented on the responses of buckling loads obtained for different support and geometry conditions. To trace snap-through paths completely, a displacement control method entitled arc-length is utilized. Findings show the capability of proposed model in nonlinear analysis of gable frames.

• 한국전산구조공학회논문집
• /
• 제17권1호
• /
• pp.21-30
• /
• 2004

본 연구에서는 유한요소법을 이용한 채널단면을 갖는 복합재료 적층 구조물의 자유진동을 다룬다. 복합적층 절판구조물에 고차항 판이론을 적용하기 위하여 개발된 유한요소 프로그램은 Lagrangian 및 Hermite 보간함수를 병용하여 면내회전각 자유도를 포함한 절점 당 8개의 자유도를 갖는다. 전단보정계수의 가정을 필요로 하지 않고 전단변형의 3차항 비선형 특성이 고려된 본 논문의 절판 요소는 국부좌표계와 전체좌표계에 대한 좌표변환행렬에 의하여 요소 당 32×32의 국부요소행렬로 구성된다. 본 해석 프로그램의 결과는 기존의 고전적 이론 및 일차항 이론에 의한 문헌 결과와 비교ㆍ분석하였으며, 화이버 보강각도, 길이-두께비, 기하학적 형상 변화 등의 다양한 매개변수 연구를 수행하였다. 본 연구에서는 특히 경계조건 및 길이-두께비 변화에 따라 예측하기 힘든 복잡한 거동을 보이는 복합적층 채널단면 구조물의 자유진동에 대하여 정밀한 고차항 이론 적용에 의한 엄밀 해석의 필요성을 제기하였다.

• 한국CDE학회논문집
• /
• 제20권3호
• /
• pp.263-268
• /
• 2015

Due to an increased sitting time in work, lumbar disc disease is one of the most frequent diseases in modern days, and this occasionally requires surgery for treatment. Endoscopic disc surgery, one of the common disc surgeries, requires a process of inserting a guide needle to the target disc for which the insertion path is manually planned by drawing lines on the patient's skin while monitoring the fluoroscopic view of the lumbar. Such procedure inevitably exposes both surgeon and patient to the fluoroscopy radiation emitted from the c-arm for a long time. To reduce the radiation exposure time, this study proposes a computer assisted method of calculating the 3D guide needle path by using 2D c-arm images of the disc in 3 different angles. Additionally, a method of the guide robot control based on the 3D needle path was developed by implementing the Hand-eye Calibration method to calculate the transformation matrix between the c-arm and robot base coordinate systems. The proposed system was then tested for its accuracy.

• 한국정밀공학회지
• /
• 제19권8호
• /
• pp.47-54
• /
• 2002

A barrel cam is used as a very important part of an index drive unit. The index drive unit must have an intermittent-rotational motion. The barrel typed cam and roller gear mechanism has the advantages of high reliability to perform a prescribed motion of a follower. This paper proposes a new method for the shape design of the barrel cam and also a CAD program is developed by using the proposed method. As defined in this paper, the relative velocity method for the shape design calculates the relative velocity of the follower versus cam at a center of roller, and then determines a contact point by using the geometric relationships and the kinematic constraints, where the direction of the relative velocity must be parallel to a common tangential line at the contact point of two independent bodies, i.e. the cam and the follower Then, the shape of the cam is defined by the coordinate transformation of the trace of the contact points. This paper presents two examples for the shape design of the barrel cam in order to prove the accuracy of the proposed methods.

• 전력전자학회논문지
• /
• 제8권2호
• /
• pp.107-115
• /
• 2003

PMSM은 높은 토크 특성과 우수한 전력 밀도, 논은 효율 때문에 산업용 빛 가정용 기기로 널리 사용되고 있다. PMSM의 우수한 제어 수행을 위해서는 회전자 위치의 정확한 정보가 필요하다. 그러나 위치 센서의 가격이 비싸고, 열악한 환경에서 신뢰도가 떨어지기 때문에 최근에는 센서리스 알고리즘에 대한 연구가 많이 진행되고 있다. 본 논문에서는 회전자 위치의 추정을 위해 쇄교 자속의 도함수를 이용한다. 수치적 미분을 행하지 않고 전압 방정식과 측정된 상전류를 이용한 수식적 미분을 통해 쇄교 자속을 구하는 a-$\beta$ 변환과 수식적 미분을 이용한 새로운 센서리스 알고리즘을 제안한다. 제안된 센서리스 속도 제어 알고리즘이 실험을 통해 증명된다.