• Proceedings of the KAIS Fall Conference
• /
• 2004.11a
• /
• pp.163-165
• /
• 2004

An identification of a font allows that an OCR system can perform font-specific processes, which consist of various mono-font segmentation tools and recognizers According to the font styles, character segmentation method should be applied differently. Touching characters in slant style cannot be segmented vertically but segmented on a slant. This paper proposes that touching characters in italic style can be segmented vertically after slant normalization.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.216-223
• /
• 2019

Fault detection during production processes is one of the required operational tasks to run production processes both safely and consistently. Unexpected operational events or undetected process faults can have a serious impact on the production systems and subsequently on the final products' quality. In addition, such situations may lead to malfunctions or breakdowns of production processes. To reliably detect such abnormalities, a new one-class classification-based detection scheme has recently been developed The proposed method consists of four steps:1) noise filtering, 2) feature selection, 3) nonlinear representation and 4) outlier detection. The performance of the proposed scheme was demonstrated using the multivariate data obtained from a simulation process. The results have shown that the proposed method produced reliable monitoring results and outperforms any existing methods with an average improvement of 25.4%. The use of proper feature selection in the proposed framework yielded better detection performance.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.456-458
• /
• 2006

Power line communication: PLC which easy to install at anywhere near outlet for electric machine. PLC uses transmission line for voltage of which is 60 Hz. Signals don't affect to electric machine in PLC because they are very small voltage. One of the important thing is the processes of adding signal to power line and extracting the signal from power line, the other is to choose the strong modulation method which sends signals long distance without loosing in PLC channel. but PLC channel have very high and variable noise and attenuation and then it is very hard to transmit optimally between the transmitter and the receiver. After all, impedance and noise problems of PLC channel must be overcame. Noises of 2 kinds which are AWGN abd impulse noise and attenuation are orated. To overcome the noise. Recently, Multi-carrier Modulation: MCM methods like as OFDM and DMT which are divide the channel into many sub-channel have been studied. those are powerful communication methods in PLC. In this paper, PLC channels made up of 3 numbers of noise and attenuation are simulated for getting BER by Matlab simulink.

• Journal of Environmental Science International
• /
• v.16 no.6
• /
• pp.699-706
• /
• 2007

Many lakes or irrigative reservoirs in Korea are rapidly contaminated due to the ever increasing pollutants. Although lots of treatment processes have been recommended and practiced, economical and technical improvement is currently needed. In this study, contaminated irrigation reservoir was treated using the proposed process which is consisted of fine air bubbles, coagulation and flotation. Fine bubbles, approximate diameter of 3 to $10{\mu}m$, were generated using cavitation in the pressurized tank and polyaluminum chloride was used as coagulants. This fine bubbles, coagulation and flotation effectively controlled the low density algae, for example, Chlorophyll-a was removed more than 97 %. Removal efficiency of COD, SS, T-N and T-P were 80.7%, 94.3%, 64.1 % and 92.4%, respectively. Pollutants released from the sediments was removed more than 80% of organics and 60-70 % of nutrients. Consequently, fine bubbles coagulation and flotation process could be effectively used as an alternative treatment method for the purpose of control of lake water quality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.6
• /
• pp.1164-1169
• /
• 2009

In this study, the bracket for car was designed in 3D using Cimatron Die Design, one of the automatic modules. To facilitate the stamping of the product, the layout of the strip was adjusted slightly. The blank layout of the double-width, 2-line, 2-pull out inner carrier was then optimized as a single arrangement. 3D design was completed in 11 processes.

• Journal of Environmental Science International
• /
• v.22 no.4
• /
• pp.425-433
• /
• 2013

A mass balance of process was calculated by using the analysis of basic unit and environmental assessment of all the processes of Busan fashion color industry cooperative that operates a combined heat and power plant and a bio treatment plant. The mass balance for the combined heat and power plant was done, based on boiler and water treatment processes while each unit reactor was used for the bio treatment plant. From the results above, a resource recycle network, a treatment flowchart for food waste water/wastewater treatment and a carbon reduction program were established.

• Management Science and Financial Engineering
• /
• v.10 no.1
• /
• pp.1-23
• /
• 2004

The changing structure of organization and the increasing diversity of business have forced organizations to have abilities to coordinate dispersed business activities. They have required cooperation and coordination among the functional units in the organization which should involve group decision-making processes. Although many group decision-making support tools and methods have been introduced to enable the collaborative process of group decision-making, they often lack the features supporting the dynamic complexity issue frequently occurring at group decision-making processes. This results in cognitive unfit between the group decision-making tasks and their supporting tools, bringing about mixed results in their effects on group decision-making. This study proposes system dynamics modeling as a group decision-making support tool to deal with the group decision -making tasks having properties of dynamic complexity in terms of cognitive fit theory.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.387-393
• /
• 2021

This study aimed to improve the software quality in weapon systems by applying ISO/IEC 25023 to the software engineering process. The software engineering process in weapon systems manages the Software Quality Requirement but has restrictively improved the software quality. Software quality items are already defined and used for software engineering processes in weapon systems, but they are defined inconsistently according to individual software development cases. Thus, the methods of quantifying software quality are different, even though the same software quality is defined. In addition, the software quality has been managed differently. The major problems of software engineering processes in weapon systems are the unclear definition of the software quality requirements and the absence of quantifying software quality standards. ISO/IEC 25023 is composed of eight quality characteristics and thirty-one sub-characteristics. ISO/IEC 25023 provides measurement functions that can quantify the software product quality based on its characteristics. To improve the software quality further, the measurement functions in ISO/IEC 25023 are suggested to quantify and manage software quality for software engineering processes in weapon systems. The expected effects of this study were analyzed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4543-4552
• /
• 2010

A leader is a special process who roles as the coordinator within multiple processes of a group. In a distributed system, leader election is the procedure of electing a coordinator. This is a very important issue for building fault-tolerant distributed systems. When two normal mobile ad hoc networks are merged, there are two leaders. This violates the safety property, so a mechanism to detect and handle are required. In mobile ad hoc distributed computing system, we propose a leader competition protocol and to prove the temporal logic to it. This solution is based on the group membership detection algorithm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3358-3365
• /
• 2012

This paper presents a scheduling scheme for die casting processes considering power usage. The scheduling problem of a shift-based die casting process is represented by a linear programming (LP) model that maximizes the average efficiency of melting furnaces in regard of the usage of molten alloy, where the product quantities of each shift are used as primary variables. In this research, we propose a novel LP model that considers power usage of foundries. The developed LP model can derive product plans in which the expended power of a casting shift does not exceed a prescribed limit, while optimizing the efficiency of alloy usage. The simulation result of a case study demonstrates the superiority and applicability of the proposed scheme. This paper serves as a basic research on the role of foundries as an intelligent costumer in smart grid environment where the limit of power usage should be fulfilled.