• 한국방재학회 논문집
• /
• 제5권3호
• /
• pp.73-82
• /
• 2005

본 연구에서는 도시하천의 통수능 확보를 위한 방안이 제시되었다 하천 좌우안을 따라 형성된 도로 하부를 통수능으로 사용하기 위해, 2차원 분석에 의해 통수단면의 제원에 따른 흐름특성을 검토하여 적합한 통수단면의 제원을 제시하였다. 주수로와 추가되는 통수단면간의 흐름 분석을 위해 2차원 수치 모형인 SMS를 이용하였고, SMS의 모형의 매개변수를 검정하기 위해 1차원 수치 모형인 HEC-RAS의 결과를 이용하였다. 제시된 통수능 확보 방안은 청계천 복원사업에 적용하였다. 50, 80, 200년 빈도 홍수에 대한 통수단면의 내수배제 능력을 검토하였으며, 적합한 통수단면의 제원을 제시하였다.

• 설비공학논문집
• /
• 제15권2호
• /
• pp.116-125
• /
• 2003

The new HVAC system to lower the conveyance energy and building height using IAV (Increasing Air Volume) technique is developed. IAV units which are equipped in each zone carry out air-conditioning and supply fresh air by induction of outdoor air in main duct. The design program which decides size of OAHU and IAV unit according to air conditioning load and fresh air demand of each zone is presented. The control system is developed to operate efficiently HVAC system and IAV unit, so that individual zone operation and well-deal with partial load and IAQ problem are possible. The new system is investigated in model building and makes more profit in conveyance energy, size of air conditioning facilities room and building height than VAV system. But in construction cost it is worse by about 15 per-centage.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제13권1호
• /
• pp.31-43
• /
• 2005

The new HVAC system is developed to lower the conveyance energy and building height using IAV(Increasing Air Volume) technique. IAV units which are equipped in each zone carry out air-conditioning and supply fresh air by induction of outdoor air in main duct. The design program which decides size of OAHU and IAV unit according to air conditioning load and fresh air demand of each zone is presented. The control system is developed to operate efficiently HVAC system and IAV unit, so that individual zone operation and well-deal with partial load and IAQ problem are possible. The new system is investigated in model building and makes more profit in conveyance energy. size of air conditioning facilities room and building height than VAV system. But in construction cost it is worse by about 15 percentage.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.409-411
• /
• 2008

Water conveyance from waste water treatment plant can play a role in securing river water quantitatively in urban watershed, but it can also cause more severe contamination of river water due to lack of water quality management. Soil aquifer treatment(SAT) has been introduced to overcome the worsening water quality in the water conveyance system considering the characteristics of Korean urban watershed. The application of SAT to the water conveyance system not only improve water quality of ordinarily discharged water but also prevent accidential water pollution to the urban watershed. Since most domestic urban watersheds are consist of narrow terrace lands and surrounded by roads, SAT is estimated not to be appropriate to the urban watershed with respect to the quantitative efficiency. However, since the upstream of urban watershed in which discharge ports are located usually consists of agricultural lands, SAT can be applied near discharge ports. Therefore, combination of water conveyance and SAT is expected to supply clean and safe river water in urban watershed.

• 한국농공학회지
• /
• 제27권4호
• /
• pp.31-41
• /
• 1985

This paper compares the estimated total construction and maintenance costs for irrigation canals in six irrigation districts near Pyongtaek. Three conventional canal types were considered: concrete bench flumes, concrete-lined canals, and earth canals. The total expenses for each type were grouped to four catagories: the net construction, land acquisition, maintenance, and other expenses. The construction costs included the assumed costs for conveyance losses from each type of canals. The results from this study support earlier studies that the bench flumes are economically feasible. Initially cheaper conveyance systems like concrete-lined and earth canals demand 'higher maintenance costs and thus, their total expenses are summed to exceed those for the bench flumes within a few years following the construction. Banch flumes are economically justifiable for the main canals of the studying districts. Sensitivity analyses were executed to evaluate the relative importance of each expense to the total cost. The analyses show that total expenses very significantly with the change of the following costs: cost for conveyance losses, net construction, maintenance, and land acquisition, in that order However, other expenses contribute little if not at all to the total. The results indicate that bench flumes should be adopted as main canal structures for most irrigation districts in the Republic.

• 한국농공학회논문집
• /
• 제50권1호
• /
• pp.13-21
• /
• 2008

Water losses in irrigation canals are mainly estimated as the sum of conveyance and delivery water loss. The losses occur via the evaporation, infiltration, gate operation and water distribution processing. Recently, the study regarding these water losses are not satisfactory enough, also delivery water loss has not been mainly considered on field design. The objective of this study is to investigate and analyze the volume of water loss in irrigation canals considering condition of actual farm land. A field measurement was performed at four research sites, which are managed by Korea Rural Community & Agriculture Corporation, to evaluate conveyance and delivery water loss for 2 years. The measurement was performed by canal type, size and designed flow using the inflow-outflow method at a major points such as start and end of each canal, derivation point of canal and inlet of paddy fields. Results of this study showed that water loss ratio in lateral canals was bigger than that of main canal unlike current design standard and the loss decrease as flow increase. The total of water loss ratio including conveyance and delivery water loss in several irrigation canals ranged between 33.25 and 45.0%.

• 한국산업정보학회논문지
• /
• 제26권1호
• /
• pp.31-40
• /
• 2021

무인 차량 기술의 주된 초점은 차량이 목적지에 도달할 때까지 운전자의 개입 없이 다양한 센서에서 얻은 정보로 차량의 방향과 속도를 제어하는 것이다. 본 논문에서는 물류창고 혹은 공장과 같이 차량의 이동 범위가 제한된 환경 내에서 저비용 센서들을 활용한 무인 운반 시스템을 개발하는 데 초점을 둔다. 또한, 실내 위치 정보를 나타내는 수단으로 RFID 시스템을 채택하였으며, 경로 수정 및 확장 가능한 자동 운송 시스템을 제안한다. 제안하는 시스템은 무인 운송에 사용되는 차량의 수와 동시에 이동하는 차량 간의 충돌이나 교착 상태가 없도록 차량의 효율적인 제어 메커니즘을 포함하고 있으며, 프로토타입 시스템을 구현하여 제안된 시스템의 효율성과 기능을 성공적으로 검증한다.

• 한국농공학회논문집
• /
• 제62권2호
• /
• pp.53-62
• /
• 2020

The purpose of this study is to estimate the channel water loss of agricultural water supply in the command areas belong to Yechon irrigation channel of Gyeongcheon reservoir located Mungyeong-si, which area experienced a severe drought in 2015. The channel water loss was estimated by comparison of the irrigation water requirements (IWR) and agricultural water supply of the field data from 2012 to 2015. Further analysis was conducted to define the conveyance loss estimated based on the leakage holes and illegal pumping spots investigated through the field survey, and the distribution loss obtained by subtracting conveyance loss from the channel water loss. The annual rainfall decreased gradually, but the contribution of effective rainfall, available rain water to crop, increased to IWR during the study period. These phenomena resulted in the increase of agricultural water supply, and hence made greater the channel water loss simultaneously. The average channel water losses estimated as 36.8 % with 7.1 % of the conveyance loss and 29.7 % of distribution loss respectively. The distribution loss seems to be related to total number of rainy days, and irrigation schedules, while the conveyance loss was caused by irrigation channel aging conditions and illegal intake problems. In order to achieve sustainable agricultural water resources, the channel water loss needs to be reduced through the restoration of aged irrigation facilities and effective water managements in the fields.

• Nuclear Engineering and Technology
• /
• 제44권5호
• /
• pp.507-522
• /
• 2012

When decommissioning a nuclear power plant, it is difficult to make an appropriate plan to ensure sufficient space for temporary placement and conveyance operations of dismantling targets. This paper describes a system to support temporary placement and conveyance operations using augmented reality (AR). The system employs a laser range scanner to measure the three-dimensional (3D) information of the environment and a dismantling target to produce 3D surface polygon models. Then, the operator simulates temporary placement and conveyance operations using the system by manipulating the obtained 3D model of the dismantling target in the work field. Referring to the obtained 3D model of the environment, a possible collision between the dismantling target and the environment is detectable. Using AR, the collision position is presented intuitively. After field workers evaluated this system, the authors concluded that the system is feasible and acceptable to verify whether spaces for passage and temporary storage are sufficient for temporary placement and conveyance operations. For practical use in the future, some new functions must be added to improve the system. For example, it must be possible for multiple workers to use the system simultaneously by sharing the view of dismantling work.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 F
• /
• pp.1971-1973
• /
• 1997

Space Vector control of linear induction motor without speed sensor is one of the most up-to-date researching subjects to the engineers in the fields of power electronics and control theory. A conveyance SLIM (Single-sided Linear Induction Motor) has required a stable speed and a soft start/stop when the goods convey. So, the close loop control method to use a speed sensor have been adopted and as the speed sensor, a linear encorder has been used. But when the speed sensor used, the application boundary is limited and the confidence of system is diminished because it is sensitive to external environment variations and its cost is very expensive. So, to solve these problems, this paper deals with speed control of the conveyance SLIM using space vector without speed sensorless.