• Korean Journal of Remote Sensing
• /
• v.36 no.2_2
• /
• pp.249-261
• /
• 2020

Coastal monitoring using multiple platforms/sensors is a very important tools for accurately understanding the changes in offshore marine environment and disaster with high temporal and spatial resolutions. However, integrated observation studies using multiple platforms and sensors are insufficient, and none of them have been evaluated for efficiency and limitation of convergence. In this study, we aimed to suggest an integrated observation method with multi-remote sensing platform and sensors, and to diagnose the utility and limitation. Integrated in situ surveys were conducted using Rhodamine WT fluorescent dye to simulate various marine disasters. In September 2019, the distribution and movement of RWT dye patches were detected using satellite (Kompsat-2/3/3A, Landsat-8 OLI, Sentinel-3 OLCI and GOCI), unmanned aircraft (Mavic 2 pro and Inspire 2), and manned aircraft platforms after injecting fluorescent dye into the waters of the South Sea-Yeosu Sea. The initial patch size of the RWT dye was 2,600 ㎡ and spread to 62,000 ㎡ about 138 minutes later. The RWT patches gradually moved southwestward from the point where they were first released,similar to the pattern of tidal current flowing southwest as the tides gradually decreased. Unmanned Aerial Vehicles (UAVs) image showed highest resolution in terms of spatial and time resolution, but the coverage area was the narrowest. In the case of satellite images, the coverage area was wide, but there were some limitations compared to other platforms in terms of operability due to the long cycle of revisiting. For Sentinel-3 OLCI and GOCI, the spectral resolution and signal-to-noise ratio (SNR) were the highest, but small fluorescent dye detection was limited in terms of spatial resolution. In the case of hyperspectral sensor mounted on manned aircraft, the spectral resolution was the highest, but this was also somewhat limited in terms of operability. From this simulation approach, multi-platform integrated observation was able to confirm that time,space and spectral resolution could be significantly improved. In the future, if this study results are linked to coastal numerical models, it will be possible to predict the transport and diffusion of contaminants, and it is expected that it can contribute to improving model accuracy by using them as input and verification data of the numerical models.

• Journal of Cadastre & Land InformatiX
• /
• v.50 no.1
• /
• pp.107-123
• /
• 2020

With stabilization of the recent multi-GNSS infrastructure, and as multi-GNSS has been proven to be effective in improving the accuracy of the positioning performance in various industrial sectors. In this study, in view that SF(Single frequency) GNSS receivers are widely used due to the low costs, evaluate effectiveness of SF Real Time Point Positioning(SF-RT-PP) based on four multi-GNSS surveying methods with RTCM-SSR correction streams in static and kinematic modes, and also derive response challenges. Results of applying SSR correction streams, CNES presented good results compared to other SSR streams in 2D coordinate. Looking at the results of the SF-RT-PP surveying using SF signals from multi-GNSS, were able to identify the common cause of large deviations in the altitude components, as well as confirm the importance of signal bias correction according to combinations of different types of satellite signals and ionospheric delay compensation algorithm using undifferenced and uncombined observations. In addition, confirmed that the improvement of the infrastructure of Multi-GNSS allows SF-RT-SPP surveying with only one of the four GNSS satellites. In particular, in the case of code-based SF-RT-SPP measurements using SF signals from GPS satellites only, the difference in the application effect between broadcast ephemeris and SSR correction for satellite orbits/clocks was small, but in the case of ionospheric delay compensation, the use of SBAS correction information provided more than twice the accuracy compared to result of the Klobuchar model. With GPS and GLONASS, both the BDS and GALILEO constellations will be fully deployed in the end of 2020, and the greater benefits from the multi-GNSS integration can be expected. Specially, If RT-ionospheric correction services reflecting regional characteristics and SSR correction information reflecting atmospheric characteristics are carried out in real-time, expected that the utilization of SF-RT-PPP survey technology by multi-GNSS and various demands will be created in various industrial sectors.

• The Journal of Art Theory & Practice
• /
• no.5
• /
• pp.43-80
• /
• 2007

PASKYULA was formed in September, 1923 through the union of artists involved in two art groups: Kim Ki-Jin, Kim Bok-Jin, Yeon Hak-Nyeon who had previously participated in the ToWolHoi, and Park Young-Hi, Lee Sang-Hwa, An Seok-Ju, former members of the BaeckJo. After its founding, the PASKYULA artists had been searching for the social function of art to reform the harsh reality of Minjung and the nation with criticism toward society as well as art world. Their art theory for MinJung could grow relatively ease in relation to changing social and political conditions in the early 1920s. In August, 1925, PASKYULA organized the Korea Artista Proletaria Federatio with the YeomGunSa, and laid the groundwork for Proletariat art movement which was regularized in the late 1920s. From PASKYULA up to the early state of KAPF, the theory of art advocated by Kim Bok-Jin and An Seok-Ju could be summarized as "art for MinJung". At that time, widely ranging discourses on MinJung, however, was spawned in art theory, because many intellectuals-including artists and writers-begun to pay more attention to MinJung, who emerged as one of the social forces after the Samil Independent Movement. Sometimes, MinJung was construed as the target of enlightenment from a negative viewpoint. On the other hand, several intellectuals under the influence of individualism asserted that the discussion itself on MinJung exerted an evil influence on art. In contrast of these cases, the PASKYULA artists including Kim Bok-Jin, An Seok-Ju perceived that MinJung had the potential to change society, and regarded them as "a creator of genuine civilization and art". In the PASKYULA artist's writings, the concept of MinJung was often overlapped with the meaning of the Choson nation suffering under colony. Although their concept of MinJung was transformed gradually into the proletariat as they were under the strong influence of socialism, it did not change that they grasped the realities of the whole Choson Peninsula through the proletarian consciousness. In the early state of PASKYULA, the methodology for social function of art was presented in a twofold manner. First of all, Kim Bok-Jin emphasized on the necessity of education to improve MinJung's way of life through art, and it was embodied by the organization of ToWol Art Workshop and public lecture. Also, he championed "the popularization of art", which was one of methods to distribute art to MinJung. According to the PASKYULA artists, art should be not art for art' sake but art for MinJung. That was why they advocated the convergence of art and MinJung's life. Especially Kim Bok-Jin affirmed a link between art and industry because he considered industry the field inextricably linked with MinJung's life. In this context, his idea could be read as the generalization and equalization within the framework of possession. Kim Bok-Jin thought that the social ramifications of capitalism deprived MinJung of their right to enjoy art, and emphasized the artist' social role to return the right to them. That is, the even distribution of art was mainly discussed than the contents of art in the half of 1920s. By 1925, the contents of art itself became an issue in the PASKYULA art theory, and it was based in realism. Kim Bok-Jin and An Seok-Ju insisted that art should be reflection of real life. At that time, realism acquired the representation of MinJung and the nation's realities not realistic style. In fact, the various Western art styles including Futurism, Constructivism, Cubism etc. were exploited in the PASKYULA's visual images. Western art, target of criticism on theory, was selectively adopted in the works which were produced by Kim Bok-Jin and An Seok-Ju. Kim Bok-Jin's MoonYeUnDong cover design was conceived of as the example in which Western art was adopted with it's ideology under the influence of MAVO, while Western art shown in An Seok-Ju's illustrations served as a decorative function in many cases. Especially, An Seok-Ju attempted the various styles of Western art simultaneously, which may be seen as representing that PASKYULA did not have a firm ideology for their style. Also, it can be read as showing his hasty zeal to overcome Western art rapidly. The wish to establish "art for MinJung" as soon as possible was accompanied with the will to jump over the all steps of Western art though it was superficial. This aspiration of PASKYULA was expressed through the mass media, which had the potential for communicating to MinJung. At this point, there was a significant disparity between PASKYULA and another art groups in the first half of 1920s. However, the PASKYULA's method on the basis of the mass media could not but have a certain limitation because of the medium's properties. Nevertheless, PASKYULA' attempts may be considered to be valuable in sense that they expended the boundaries of Korean modern art into the commercial art questioning the matter of the distribution for art.

• Journal of radiological science and technology
• /
• v.44 no.5
• /
• pp.525-534
• /
• 2021

In order to provide high-quality medical services to the public and contribute to the improvement of public health, it is necessary to enact an independent law according to the work of radiological technologists. Therefore, this study intends to review the regulations related to radiographers in the Medical Service Technologists, etc. Act. and to present opinions and directions for enactment of individual laws for radiological technologists. An online survey was conducted to 15,000 radiological technologists working in medical institutions and education sites in Korea; 1,027 people (6.85%) responded. The questionnaire consisted of 3 questions on demographic characteristics, 5 questions on the scope of work, and 12 questions on the revision of the Medical Service Technologists, etc. Act. and the establishment of the Radiological Technologist Independent Act. Reliability and factor analysis were performed on 9 questions measured on a Likert 5-point scale in "Revision of the Medical Service Technologists, etc. Act. and the establishment of the Radiological echnologist Independent Act" among the questionnaire items. Reliability for the total 9 questions was Chronbach α=0.728. There was a high perception that the regulations related to radiological technologists were insufficient in the current Medical Service Technologists, etc. Act., and the perception that examinations performed by radiological technologists at medical institutions were included in medical practice was high. If the Radiological Technologist Independent Act is enforced, a high percentage of respondents said that they could receive legal protection through the institutionalization of the scope of work, that the status of radiological technologists would be improved, and the scope of work would be expanded. The response that the scope of work of radiological technologists should be included was the highest at 96.6%. In the analysis according to demographic characteristics, it was found that 96.7% of the respondents were agreed regardless of the factors. Radiological technologists will have to work hard to secure the public health by coping with new radiology devices, procedures and treatment methods. Therefore, as the results of this study, it is expected that the enactment and implementation of the Radiological Technologist Independent Act will contribute to the improvement of the quality of treatment for patients and to the public health.

• Korea Science and Art Forum
• /
• v.37 no.5
• /
• pp.215-226
• /
• 2019

This study analyzed the healing effect of the design elements of healing environment from the perspective of environmental stress, which is one of the contents of environmental psychology. By examining the objective healing effects of the design elements of the healing environment, this study attempted to prepare a theoretical basis for contributing to the construction of a systematic and systematic healing environment. This study consists of three phases. Firstly, three environmental stress theories (Attention Recovery Theory, Evolutionary Psychology, and Environmental Stress Model) were examined to review the academic basis of which the theoretical concept of the healing environment has been derived and developed. Second, we analyzed 16 previous research on the design elements of healing environment and used them as an analysis framework of this study. Thirdly, 11 foreign studies that proved the healing effects of healing environment design elements through objective research methods were considered and analyzed as an analysis framework, and the basis for applying design elements in constructing healing environment was prepared. The research results are as follows. First, the concept of healing environment was developed from Lazarus's psychological stress theory and Ulrich's theory of evolutionary psychology, suggesting that it can be used as one of the noninvasive healing tools that affect stress reduction. Second, the healing environment design elements could be divided into 15 factors and categorized as physical environment, psychological environment, and social environment, and it was found that most of them were mentioned and studied in the previous research in order of nature-friendly, aesthetic, and openness. Third, most of the previous research on the healing effects of the design elements of the healing environment were related to natural affinity and aesthetics, and it was found that the visual elements of the healing environment could affect the actual stress reduction.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.3
• /
• pp.38-55
• /
• 2019

The purpose of this study is to clarify the historical flow of baekdong alloy's usage according to the alloying materials mentioned in document records. For this purpose, we first overviewed the use of copper as a base material for white copper alloys and other types of copper alloys. Baekdong is an alloy of copper and other metals and is currently defined as an alloy of copper and nickel. However, depending on the research subjects and time of the scholars, baekdong may be defined as a metal with over a certain percentage of tin added to copper, or as an alloy of tin, zinc, and lead with copper. There is disagreement regarding the interpretation of this term. Baekdong, which started to appear in the literature of the Three Kingdoms Period, has been steadily seen through the Goryeo and Chosun Dynasties to the modern period. It has been used in various ways, according to each age and culture, from the symbol of the office to trading goods, daily life goods, and money. In the literature, baekdong's alloying material is not only copper and nickel, which are currently defined as alloys, but it is the same in that copper is used as the base metal of the alloy, although it varies slightly from generation to generation. In addition to copper, tin, zeolite, and emerald, zinc and lead also appeared. It was found that baekdong, which means alloy, and baekdong, which means white metal, were mixed. Nickel, which is the alloy material of baekdong as it is currently defined, is a metal with a relatively high discovery time and is widely used as a material for modern industrial fields. Nickel was introduced into Korea at the end of the Joseon Dynasty, but its use is not known in detail. In this study, we examined the acceptance and use of nickel-based baekdong in articles of modern newspapers and in statistical data. Based on the experience of craftsmen, we estimated the period when nickel-based alloys were used in crafts. Material is a direct factor in the development and deterioration of technology, and the development of technology is the basis for the changing of civilizations and cultures. In this context, this study was to investigate baekdong with the material of alloys as a starting point.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.83-89
• /
• 2020

For the past few decades, as part of efforts to protect the environment where fossil fuels, which have been a key energy resource for mankind, are becoming increasingly depleted and pollution due to industrial development, ecofriendly secondary batteries, hydrogen generating energy devices, energy storage systems, and many other new energy technologies are being developed. Among them, the lithium-ion battery (LIB) is considered to be a next-generation energy device suitable for application as a large-capacity battery and capable of industrial application due to its high energy density and long lifespan. However, considering the growing battery market such as eco-friendly electric vehicles and drones, it is expected that a large amount of battery waste will spill out from some point due to the end of life. In order to prepare for this situation, development of a process for recovering lithium and various valuable metals from waste batteries is required, and at the same time, a plan to recycle them is socially required. In this study, we introduce a nanoscale pattern transfer printing (NTP) process of Li2CO3, a representative anode material for lithium ion batteries, one of the strategic materials for recycling waste batteries. First, Li2CO3 powder was formed by pressing in a vacuum, and a 3-inch sputter target for very pure Li2CO3 thin film deposition was successfully produced through high-temperature sintering. The target was mounted on a sputtering device, and a well-ordered Li2CO3 line pattern with a width of 250 nm was successfully obtained on the Si substrate using the NTP process. In addition, based on the nTP method, the periodic Li2CO3 line patterns were formed on the surfaces of metal, glass, flexible polymer substrates, and even curved goggles. These results are expected to be applied to the thin films of various functional materials used in battery devices in the future, and is also expected to be particularly helpful in improving the performance of lithium-ion battery devices on various substrates.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.1
• /
• pp.446-453
• /
• 2021

This paper deals with two methods regarding fact and value. One is the method of H. Putnam, which is to break the boundary between fact and value and to make a world where the two have an inherent connection. The other is the method of J. Habermas, which regards fact and value as the product of an intersubjective agreement based on argumentation. Putnam, through his position of internal realism, moves from realism to pragmatism, especially by combining the rationalist tradition of Kant and Dewey's pragmatic views. Habermas also stands in the tradition of rationalism and universalism in Kant, at the same time emphasizing the practicability of truth in Hegel's tradition of historical reason. The significance of the strategy of Putnam and Habermas is that they have attempted to revive the realm of value against the strict dichotomy of facts and values and the subsequent devaluation of rationality in the realm of value. The starting point of this attempt is that the practical foundation of rationality is laid on life and practice. This could provide the room for escaping from rationality, which prioritizes only truths that reveal facts, that is, instrument-reduced rationality, the room for the revival of practical rationality through reflection on what is the purpose of life, and, in turn, the room for resisting to pass the realm of values and norms to the logic of habitual routines or customs. However, despite such common goal, there are clear limitations to Putnam's approach due to the differences in the strategies taken on facts and values. Putnam's method can demolish the whole universal framework that is the foundation where pragmatic pluralism will be fostered, eliminating the difference between the specificity of values and the universality of norms and shaking up the status of universal ethics. Therefore, Habermas' ethical theory is proposed as an alternative to establish a basis for universal ethics by relying on communication rationality and to secure the coercion of norms and blossom cultural pluralism as a diverse lifestyle based on this coercion.

• Korean Journal of Environment and Ecology
• /
• v.36 no.2
• /
• pp.118-138
• /
• 2022

This study was conducted to identify the vegetation structure of major vegetation by region and elevation in the subalpine zone of Seoraksan National Park and prepare an inventory of flora. We reviewed the results of the previous subalpine studies and, through a preliminary survey, determined that the first appearance point of subalpine vegetation was about 800 m based on the south. Then we conducted a site survey by installing a total of 77 plots, including 12 plots on the northern Baekdamsa-Madeungnyeong trail (BD), 13 plots on the west Hangyeryeong-Kkeutcheong trail (HG), 13 plots on the east side of Sinheungsa-Socheongbong trail (SA), and 39 plots in the southern Osaek-Kkeutcheong, Osaek-Daecheongbong trail (OS), in an interval of 50 m above sea level. The analysis classified 7 communities, including Qercus mongolica-Abies holophylla-Acer pseudosieboldianumcommunity, Q. mongolica-Tilia amurensiscommunity, Q. mongolica-Pinus koraiensiscommunity, Q. mongolica-A. pseudosieboldianumcommunity, Betula ermanii-A. nephrolepiscommunity, P. koraiensis-A. nephrolepiscommunity, and mixed deciduous broad-leaf tree community according to the species composition based on the appearance of the major subalpine plants such as Quercus mongolica, Betula ermanii, and Abies nephrolepis, region, and elevation. 10.68±2.98 species appeared per plot (100 m²), and 110.87±63.89 individuals were identified. The species diversity analysis showed that the subalpine vegetation community of Seoraksan National Park was a mixed forest in which various species appeared as important species. Although there was a difference in the initial elevation for the appearance of major subalpine plants by region, they were distributed intensively in the elevation range of 1,100 to 1,300 m. In the Seoraksan National Park, 322 taxa, 83 families, 193 genera, 196 species, 1 subspecies, 26 varieties, and 4 forms of vascular plants were identified. One taxon of Trientalis europaeavar.arcticawas identified as the protected species. The endemic plants were 19 taxa, and 58 taxa were identified as subalpine plants.

• Science of Emotion and Sensibility
• /
• v.25 no.1
• /
• pp.41-54
• /
• 2022

The purpose of this study was to propose a "user experience (UX)-centered product development process" so that the product design development process using the service design process can be systematized and used in practice. In a situation in which usability research on office phones is lacking compared to general home phones, this study expands to a product-based service design point of view rather than simple product development, intending to research ways to provide user experience value through office phone design in smart office. This study focused on extracting UX-centered user needs using the service design process and developing product design that realizes user experience value. In particular, the service design process was applied to systematically extract user needs and experience value elements in the product development process and to discover ideas that were converged with product-based services. For this purpose, the "Double Diamond Design Process Model," which is widely used in the service design field, was adopted. In addition, a product design development process was established so that usability improvement plans, user experience value elements, and product-service connected ideas could be extracted through a work-flow in which real users and people from various fields participate. Based on the double diamond design process, in the "Discover" information collection stage, design trends were identified mainly in the office phone markets. In the "Define" analysis and extraction stage, user needs were analyzed through user observation, interview, and usability survey, and design requirements and user experience issues were extracted. Persona was set through user type analysis, and user scenarios were presented. In the "Develop" development stage, ideation workshops and concept renderings were conducted to embody the design, and people from various fields within the company participated to set the design direction reflecting design preference and usability improvement plans. In the "Deliver" improvement/prototype development/evaluation stage, a working mock-up of a design prototype was produced and design and usability evaluation were conducted through consultation with external design experts. It is meaningful that it established a "UX-centered product development process" model that converged with the existing product design development process and service design process. Ultimately, service design-based product design development process was presented so that I Corp.'s products could realize user experience value through service convergence.