• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.2
• /
• pp.166-170
• /
• 1999

The identification of quantitative trait loci (QTL) has the potential to enhance the efficiency of im- proving food processing traits of soybean. In this study, 92 restriction fragment length polymorphism (RFLP) loci and two morphological markers (W$_1$ and T) were used to identify QTL associated with food processing traits of soybean for sprout in 83 F$_2$-derived lines from a cross of ＇Pureun＇ x ＇Jinpum 2＇. The genetic map consisted of 76 loci which covered about 760 cM and converged into 20 linkage groups. Eighteen markers remained unlinked. Phenotypic data were collected for hypocotyl length, abnormal seedling rate, and sprout yield seven days after seed germination at 2$0^{\circ}C$. Based on the single-factor analysis of variance, eight independent markers were associated with hypocotyl length. Four of seven markers associated with abnormal seedling rate were identified as independent. Seven loci were associated with sprout yield. For three different traits, much of genetic variation was explained by the identified QTL in this population. Several RFLP markers in linkage group (LG) Bl were detected as being associated with three traits, providing a genetic explanation for the biological correlation of sprout yield with hypocotyl length (r=OA07＊＊＊) and with abnormal seedling rate (r=-406＊＊＊).

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.04a
• /
• pp.333-336
• /
• 2008

This study is the result between the variation of fuel moisture and the risk of forest fire through measuring the change of moisture containing ratio on-site and its average analysis for each diameter of surface dead fuels in the forest. The measurement was performed on six days from the day after a rainfall. The fuel moisture on-site was measured on the day when the accumulated rainfall was above 5.0mm, and the measurements was 2 times in spring. From the pine forest which were distributed around Samcheok and Donghae in Kangwondo, three regions were selected by loose, medium, and dense forest density, and the fuel moisture was measured on the ranges which are less than 0.6cm, 0.6-3.0cm, 3.0-6.0cm, and more than 6.0cm in the forest for six days from the day after a rainfall. The study showed that the moisture containing ratio converged on 3 - 4 days for surface deads fuels which diameter are less than 3.0cm and the convergence was made more than six days for ones which diameters are more than 3.0cm except the surface dead fuel of 3.0-6.0cm diameter of loose forest density.

• Journal of the Korean Society of Combustion
• /
• v.14 no.4
• /
• pp.1-6
• /
• 2009

Analysis of the internal state of the blast furnace is necessary to predict and to control the operating conditions. Especially, it is important to develop models of the blast furnace to predict the cohesive zone because shape of the cohesive zone influences overall operating conditions of blast furnace such as gas flow, chemical reactions and temperature. Because many previous blast furnace models have assumed cohesive zone to be fixed, it was not possible to evaluate the shape change of cohesive zone in relation with operating conditions such as PCR, blast condition, and production rate. In this study, an axi-symmetric 2-dimensional steady state model is proposed to simulate blast furnace processes. In this model, cohesive zone is determined by the solid temperature. Finite volume method is employed for numerical simulation. To find location of the cohesive zone, entire calculation procedure is iterated until converged. Through this approach, shape of the cohesive zone, velocity and temperature within the furnace are predicted from the model.

• Journal of Integrative Natural Science
• /
• v.2 no.2
• /
• pp.101-130
• /
• 2009

In recent years, South Korea has often witnessed damages by gusts caused by thunderstorms in summer. The Korea Meteorological Administration defines that a gust happens when the maximum instantaneous wind velocity is 10m/s or more and draws up hourly observation reports. When a cumulonimbus develops due to an ascending current and reaches the height of 12~16 km, the temperature of the cloud top drops and a lightening happens, which causes a gust accompanied by a thunderstorm and further regional meteorological damage. It's difficult to predict a regional gust with the mesoscale prediction model at the administration. Thus this study set out to analyze the damage cases by a gust accompanied by a thunderstorm and to make a contribution to the prediction and understanding of a gust by a thunderstorm. A gust by a thunderstorm happens where potential equivalent temperature converges or is higher than the surrounding areas. The convergence area of potential equivalent temperature matches the track of thunderstorm cells. The Kimje gust took place where high potential equivalent temperature converged, and the Jangsu gust did as the area of high potential equivalent temperature approached. There should be a good amount of vapor supply with the moisture flux converging at the bottom layer in order to bring instability. In addition, it should collide into a dry and cold atmosphere at 700 hPa. The moving track at the center of the low dew point spread corresponds to that of a gust.

• Education of Primary School Mathematics
• /
• v.21 no.2
• /
• pp.193-208
• /
• 2018

Classification is presented in the curriculum of elementary school mathematics, science, Korean language, and integrated subjects as the major function that needs to be learned. In addition, mathematics textbooks teach the classification as a basic process for organizing and interpreting collected materials in a separate unit. So, we analyzed the curriculum documents and textbooks of mathematics, science, Korean language, and integrated subjects. And we explored how to teach the classification in the context of mathematics subject. As a result, it is necessary to find different classification criteria in conjunction with detailed observation and investigation activities, and to teach that considering the circumstances and purpose of the classification. It also provided implications on how to revive converged classes that focus on big ideas and skills, which are commonly offered by various subjects.

• Journal of Environmental Science International
• /
• v.27 no.7
• /
• pp.499-507
• /
• 2018

Agricultural meteorological information is an important resource that affects farmers' income, food security, and agricultural conditions. Thus, such data are used in various fields that are responsible for planning, enforcing, and evaluating agricultural policies. The meteorological information obtained from automatic weather observation systems operated by rural development agencies contains missing values owing to temporary mechanical or communication deficiencies. It is known that missing values lead to reduction in the reliability and validity of the model. In this study, the hierarchical Bayesian spatio-temporal model suggests replacements for missing values because the meteorological information includes spatio-temporal correlation. The prior distribution is very important in the Bayesian approach. However, we found a problem where the spatial decay parameter was not converged through the trace plot. A suitable spatial decay parameter, estimated on the bias of root-mean-square error (RMSE), which was determined to be the difference between the predicted and observed values. The latitude, longitude, and altitude were considered as covariates. The estimated spatial decay parameters were 0.041 and 0.039, for the spatio-temporal model with latitude and longitude and for latitude, longitude, and altitude, respectively. The posterior distributions were stable after the spatial decay parameter was fixed. root mean square error (RMSE), mean absolute error (MAE), mean absolute percentage error (MAPE), and bias were calculated for model validation. Finally, the missing values were generated using the independent Gaussian process model.

• Journal of electromagnetic engineering and science
• /
• v.19 no.1
• /
• pp.6-12
• /
• 2019

An IE-FFT algorithm is implemented and applied to the electromagnetic (EM) solution of perfect electric conducting (PEC) scattering problems. The solution of the method of moments (MoM), based on the magnetic field integral equation (MFIE), is obtained for PEC objects with closed surfaces. The IE-FFT algorithm uses a uniform Cartesian grid to apply a global fast Fourier transform (FFT), which leads to significantly reduce memory requirement and speed up CPU with an iterative solver. The IE-FFT algorithm utilizes two discretizations, one for the unknown induced surface current on the planar triangular patches of 3D arbitrary geometries and the other on a uniform Cartesian grid for interpolating the free-space Green's function. The uniform interpolation of the Green's functions allows for a global FFT for far-field interaction terms, and the near-field interaction terms should be adequately corrected. A 3D block-Toeplitz structure for the Lagrangian interpolation of the Green's function is proposed. The MFIE formulation with the IE-FFT algorithm, without the help of a preconditioner, is converged in certain iterations with a generalized minimal residual (GMRES) method. The complexity of the IE-FFT is found to be approximately $O(N^{1.5})$and $O(N^{1.5}logN)$ for memory requirements and CPU time, respectively.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.11
• /
• pp.159-165
• /
• 2018

In this study, it is analyzed that keywords of the interest in the 4th industrial revolution for science and Technician K women's university students, areas to prioritize in the strategy of 4th industry revolution, to research compare analyze the recognition of science technology such as the most necessary education, human resource development of universities and companies in Korea and abroad according to the technology trend required in the 4th Industrial revolution era and which area to prepare for the 4th industrial revolution. The survey result shows different thoughts of science and Technician(KOFST) and the women university students. In the 1) 4th industrial revolution, the 96% of former are interested, while 60% of latter are interested. And in the most used keywords, the former group used AI(24%), Fusion new industry(21%) the most, while the latter group used AI(34%), Robot(18%). And, 3) in the strategic priority, the science technology experts are interested in education, R&D system innovation(27%), IoT, Information and Communication(26%) and the university students are interested in IoT, Information and Communication(31%), AI(28%). Finally, 4) the science technology experts thought of Autonomous Vehicle(20%), 3D Printer(7%), AI(16%) important, while the women university students thought of AI(27%), VR/Augmented Reality(17%), and Autonomous Vehicle(16%) the most necessary education. In the 4th industrial revolution, we need people with ability to solve complicated problems with creativity based on understanding and absorbing new knowledge and thinking of converged idea.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.1
• /
• pp.81-98
• /
• 2013

Since Probabilistic Latent Semantic Analysis (PLSA) and Latent Dirichlet Allocation (LDA) were introduced, many revised or extended topic models have appeared. Due to the intractable likelihood of these models, training any topic model requires to use some approximation algorithm such as variational approximation, Laplace approximation, or Markov chain Monte Carlo (MCMC). Although these approximation algorithms perform well, training a topic model is still computationally expensive given the large amount of data it requires. In this paper, we propose a new method, called non-simultaneous sampling deactivation, for efficient approximation of parameters in a topic model. While each random variable is normally sampled or obtained by a single predefined burn-in period in the traditional approximation algorithms, our new method is based on the observation that the random variable nodes in one topic model have all different periods of convergence. During the iterative approximation process, the proposed method allows each random variable node to be terminated or deactivated when it is converged. Therefore, compared to the traditional approximation ways in which usually every node is deactivated concurrently, the proposed method achieves the inference efficiency in terms of time and memory. We do not propose a new approximation algorithm, but a new process applicable to the existing approximation algorithms. Through experiments, we show the time and memory efficiency of the method, and discuss about the tradeoff between the efficiency of the approximation process and the parameter consistency.

• Applied Chemistry for Engineering
• /
• v.17 no.4
• /
• pp.403-408
• /
• 2006

To enhance the dental properties of polymeric dental restorative composite activated by visible-light, the surface of hydrophilic silica nanoparticle was hydrophobically treated using $\gamma$-methacryloxypropyltrimethoxysilane ($\gamma$-MPS) coupling agent. Structural properties and dispersity of silica in the composite was compared with the hydrophobicity of silica. Polymerization characteristic of the composite was also evaluated. Degree of hydrophobicity of silica nanoparticle was considerably improved with an increase of $\gamma$-MPS upto 40 wt% and converged asymptotically. Additionally, with an increase of the hydrophobicity of silica nanoparticle, the dispersity of silica was improved and the residual monomer in the composite was not detected from nuclear magnetic resonance experiment which indicated superior polymerization behavior.