• The Journal of Advanced Prosthodontics
• /
• v.10 no.4
• /
• pp.265-270
• /
• 2018

PURPOSE. The purpose of this in vitro study was to evaluate the accuracy of a new implant impression technique using bite impression coping and a dual arch tray. MATERIALS AND METHODS. Two implant fixtures were placed on maxillary left second premolar and first molar area in dentoform model. The model with two fixtures was used as the reference. The impression was divided into 2 groups, n=10 each. In group 1, heavy/light body silicone impression was made with pick up impression copings and open tray. In group 2, putty/light body silicone impression was made with bite impression copings and dual arch tray. The reference model and the master casts with implant scan bodies were scanned by a laboratory scanner. Surface tessellation language (STL) datasets from test groups was superimposed with STL dataset of reference model using inspection software. The three-dimensional deviation between the reference model and impression models was calculated and illustrated as a color-map. Data was analyzed by independent samples T-test of variance at ${\alpha}=.05$. RESULTS. The mean 3D implant deviations of pick up impression group (group 1) and dual arch impression group (group 2) were 0.029 mm and 0.034 mm, respectively. The difference in 3D deviations between groups 1 and 2 was not statistically significant (P=.075). CONCLUSION. Within limitations of this study, the accuracy of implant impression using a bite impression coping and dual arch tray is comparable to that of conventional pick-up impression.

• Journal of Broadcast Engineering
• /
• v.16 no.5
• /
• pp.873-882
• /
• 2011

In this paper, we propose an efficient deinterlacing algorithm which interpolates the missing scan lines by weighted summing of the intra and the inter interpolation pixels according to the spatio-temporal variation. In the spatial interpolation, we adopt a new edge based spatial interpolation method which includes edge directional refinement. The conventional edge dependent interpolation algorithms are very sensitive to noise due to the failure of estimating edge direction. In order to exactly detect edge direction, our method first finds the edge directions around the pixel to be interpolated and then refines edge direction of the pixel using weighted maximun frequent filter. Futhermore, we improve the accuracy of motion detection by reducing the possibility of motion detection error using 3 tab median filter. In the final interpolation step, we adopt weighted sum of intra and inter interpolation pixels according to spatio-temporal variation ratio, thereby improving the quality in slow moving area. Simulation results show the efficacy of the proposed method with significant improvement over the previous methods in terms of the objective PSNR quality as well as the subjective image quality.

• Proceedings of the KSMRM Conference
• /
• 2001.11a
• /
• pp.111-111
• /
• 2001

목적： To evaluate the feasibility of the event-related functional MR study using power grip studying the hand motor system 대상 및 방법： Event-related functional MRI was performed on a 1.5T MR unit in seven norm volunteers (man=7, right-handedness=2, left-handedness=5, mean age： 25 years). A single-shot GRE-EPI sequence (TR/TE/flip angle： 1000ms/40ms/90, FOV = 240 mm matrix= 64$\times$64, slice thickness/gap = 5mm/0mm, 7 true axial slices) was used for functiona MR images. A flow-sensitive conventional gradient echo sequence (TR/TE/flip angl 50ms/4ms/60) was used for high-resolution anatomical images. To minimize the gross hea motion, neck-holders (MJ-200, USA) were used. A series of MR images were obtained in axial planes covering motor areas. To exclude motion-corrupted images, all MR images wer surveyed in a movie procedure and evaluated using the estimation of center of mass of ima signal intensities. Power grip task consisted of the powerful grip of all right fingers and hand movement ta used very fast right finger tapping at a speed of 3 per 1 second. All tasks were visual-guid by LCD projector (SHARP, Japan). Two tasks consisted of 134 phases including 7 activatio and 8 rest periods. Active stimulations were performed during 2 seconds and rest period were 15 seconds and total scan time per one task was 2 min 14 sec. Statistical maps we obtained using cross-correlation method. Reference vector was time-shifted by 4 seconds an Gaussian convolution with a FWHM of 4 seconds was applied to it. The threshold in p val for the activation sites was set to be 0.001. All mapping procedures were peformed usin homemade program an IDL (Research Systems Inc., USA) platform. We evaluated the activation patterns of the motor system of power grip compared to hand movement in t event-related functional MRI.

• Progress in Medical Physics
• /
• v.3 no.1
• /
• pp.53-62
• /
• 1992

Stereotactic implantation of intracranial lesions, and the development of stereotactic convergent irradiation, radiosurgery, techniques have to obtain the accurate coordinates of the tumor locations and that of critical organ. Computed tomography(CT) provides relatively precise imformations of tumor localization and surround the normal organs for conventional radiotherapy. This CT image use to extend for stereotactic radiosurgery procedures. Since the convergent irradiation technique in linear accelerator requires the target center coincident with gantry isocenter or radosurgery frame, the target coordinates must be described in accurately. We used the BRW stereotactic system for describing the target position in CT images This algorithm provides the coordinate conversions for orthogonal or non-orthogonal CT scan image. In this experiments, the target positions have shown the small discripancy within :to.3mm uncertanty in several known target positions in the phantom through the provided programs and it compared to that of BRW stereotactic systems.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.1
• /
• pp.46-53
• /
• 2008

Ultrasonic C-scan technique is one of very popular techniques being used for detection of flaws in polymer matrix composite(PMC). However, the application of this technique is very limited for evaluation of defects in PMC fabricated by the automated fiber placement process. The purpose of this study is to develop a novel ultrasonic hybrid system based on nondestructive and non-contact ultrasonic techniques for evaluation of delamination in carbon/epoxy and carbon/PPS composite laminates. It was shown that the newly developed ultrasonic hybrid system based on dual air-coupled pitch-catch technique with ultrasonic scattering reflection concept could provide excellent image with higher resolution of delamination in PMC compared with the conventional pitch-catch method. It is expected that this ultrasonic hybrid technique can be applied for on-line inspection of flaws in PMC during the fabrication process.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.11
• /
• pp.979-983
• /
• 2013

The three-dimensional measurement method of confocal systems is a spot scanning method which has a high resolution and good illumination efficiency. However, conventional confocal systems had a weak point in that it has to perform XY axis scanning to achieve FOV (Field of View) vision through spot scanning. There are some methods to improve this problem involving the use of a galvano mirror [1], pin-hole array, etc. Therefore, in this paper we propose a method to improve a parallel mode confocal system using a micro-lens and pin-hole array in a dual microscope configuration. We made an area scan possible by using a combination MLA (Micro Lens Array) and pin-hole array, and used an objective lens to improve the light transmittance and signal-to-noise ratio. Additionally, we made it possible to change the objective lens so that it is possible to select a lens considering the reflection characteristic of the measuring object and proper magnification. We did an experiment using 5X, 2.3X objective lens, and did a calibration of height using a VLSI calibration target.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.12
• /
• pp.41-50
• /
• 1999

In this paper, the new VLSI architecture of a reconstruction filter for morphological image segmentation is proposed. The filter, based on the $h_{max}$ operation, simplifies the interior of each region while preserving the boundary information. The proposed architecture adopts a partitioned memory structure and an efficient image scanning strategy to reduce the operations. The proposed memory partitioning scheme makes it possible that every data required for processing can be read from each memory at a time, resulting in parallel data processing. By the extended connectivity consideration, the operation is much decreased because more simplification is achieved in scanning stage. The selective raster scan strategy endows the satisfactory noise removal capability with negligible hardware complexity increase. The proposed architecture is designed using VHDL, and functional evaluation is performed by the CAD tool, Mentor. The experiment results show that the proposed architecture can simplify image profile with less than 18% operations of the conventional method.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.4
• /
• pp.294-302
• /
• 2015

PURPOSE. The purpose of this study was to verify the clinical-feasibility of additive manufacturing by comparing the accuracy of four different manufacturing methods for metal coping: the conventional lost wax technique (CLWT); subtractive methods with wax blank milling (WBM); and two additive methods, multi jet modeling (MJM), and micro-stereolithography (Micro-SLA). MATERIALS AND METHODS. Thirty study models were created using an acrylic model with the maxillary upper right canine, first premolar, and first molar teeth. Based on the scan files from a non-contact blue light scanner (Identica; Medit Co. Ltd., Seoul, Korea), thirty cores were produced using the WBM, MJM, and Micro-SLA methods, respectively, and another thirty frameworks were produced using the CLWT method. To measure the marginal and internal gap, the silicone replica method was adopted, and the silicone images obtained were evaluated using a digital microscope (KH-7700; Hirox, Tokyo, Japan) at 140X magnification. Analyses were performed using two-way analysis of variance (ANOVA) and Tukey post hoc test (${\alpha}=.05$). RESULTS. The mean marginal gaps and internal gaps showed significant differences according to tooth type (P<.001 and P<.001, respectively) and manufacturing method (P<.037 and P<.001, respectively). Micro-SLA did not show any significant difference from CLWT regarding mean marginal gap compared to the WBM and MJM methods. CONCLUSION. The mean values of gaps resulting from the four different manufacturing methods were within a clinically allowable range, and, thus, the clinical use of additive manufacturing methods is acceptable as an alternative to the traditional lost wax-technique and subtractive manufacturing.

• Conservation Science in Museum
• /
• v.22
• /
• pp.85-96
• /
• 2019

The restoration of ceramics excavated in fragments is limited by the difficulty of inferring the overall shape of the original object. However, recent innovations in digital technology can help to overcome the limits of conventional restoration using handwork. This study explored the potential of digital technology by digitally restoring a shard from a white porcelain water dropper excavated at a kiln site at Sindae-ri. In order to complete the digital restoration, 3D scanning was applied to obtain scan data, and 3D modeling and texture mapping were performed. In this way, three-dimensional data with patterns and color information was acquired and the original form of the water dropper could be ascertained based on the shard. The study found that the data acquired from digital restoration can be used for various purposes, including for obtaining data on cross-sections or missing portions of a relic.

• The Journal of Korean Physical Therapy
• /
• v.24 no.2
• /
• pp.163-169
• /
• 2012

Purpose: The present study was designed to investigate the effect of trunk control training on the labile surface on relative impulse and balance in stroke patients. Methods: A total of 21 participants were assigned to an experimental group (n=11) or a control group (n=10). In addition to conventional therapy, the experimental group received trunk control training on the swiss ball; 20 minutes, 4 times a week, for 8 weeks. Balance ability was evaluated by FRT (functional reaching test) and TUG (time up and go). In addition relative impulse in 6 areas of the foot (hallux, 1st metatarsal head, 2~3 metatasal head, 4~5 metatasal head, mid foot and heel) were measured using the F-scan system to evaluate locomotion ability during gait. Results: Significant differences in the relative impulse were observed in the areas of the 2~3 metatasal head during gait after exercise in both the control group and experimental group (p<0.05). Also, a significant increase was seen in the hallux after exercise in the experimental group (p<0.05), but no such significant increase was seen in the control group (p>0.05). Significant differences were observed in FRT and TUG in the experimental group but no such significant increase was observed in the control group (p>0.05). Conclusion: These results suggest that trunk control training on labile surface improves the balance in stroke patients and has a positive effect on locomotion ability.