• International Journal of Railway
• /
• 제1권1호
• /
• pp.1-5
• /
• 2008

The railway system requires safety and reliability of service of all railway vehicles. Suitable technical systems and working methods adapted to it, which meet the requirements on safety and good order of traffic, should be maintained. For detection of defects, non-destructive testing methods-which should be quick, reliable and cost-effective - are most often used. Since failure in railway wheelset can cause a disaster, regular inspection of defects in wheels and axles are mandatory. Ultrasonic testing, acoustic emission and eddy current testing method and so on regularly check railway wheelset in service. However, it is difficult to detect a crack initiation clearly with ultrasonic testing due to noise echoes. It is necessary to develop a non-destructive technique that is superior to conventional NDT techniques in order to ensure the safety of railway wheelset. In the present paper, the new NDT technique is applied to the detection of surface defects for railway wheelset. To detect the defects for railway wheelset, the sensor for defect detection is optimized and the tests are carried out with respect to surface and internal defects each other. The results show that the surface crack depth of 1.5 mm in press fitted axle and internal crack in wheel could be detected by using the new method. The ICFPD method is useful to detect the defect that initiated in railway wheelset.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.320-328
• /
• 2011

The down town passage segment which follows in the straight line which follows recently in high speed of the railway and rail construction is increasing. Also according to quality of life improvement of the citizens whom follows in national income increase the resident demand only becomes larger day by day about a environmental creation which is comfortable and house environmental etc. Demand of the citizens is not the problem of today yesterday about like this railway mean of transportation and with the fact that continuously will increase in future. This study is to predict and reduce railway noise from the conventional PSC-beam bridges which passes through urban areas under the government strateges of speed and weight increases of railway. The purpose of this study is to recommend a proper noise prediction method for designing pleasant roadside environments. The railway design including existing line reconstructions should minimize curved alignment to increase train speed to 180~200km/hr under the government's long-term planing such as the 4th Comprehensive National Development Plan (2000~2020), National Intermodal Transportation Plan (2000~2019) and National Railroad Network Establishment Plan (2006~2015), Since the PSC-beam bridges are mainly used for bridge structures urban areas, noise measurements were performed and analyzed to recommend the noise prediction methods for each type and speed of train respectively.

• 한국소음진동공학회논문집
• /
• 제18권8호
• /
• pp.864-871
• /
• 2008

The tilting trains can run on curve track about 30% faster than conventional train without affecting passenger comfort. As the tilting trains offer the optimum means of providing faster and more comfortable rail service with minimum of environmental disturbance and capital investment, it is widely adopted for commercial operation all over the world. Over several years, the Korea Railroad Research Institute(KRRI) and Ministry of Construction and Transportation(MOCT) have been developing 200 km/h Korean tilting train, Hanvit200. Hanvit200 adopts the pendulum type tilting mechanism and hybrid car body structure, mainly CFRP combined with steel. In this paper the vibrational characteristics of Hanvit200 was investigated through Eigen vector analysis, modal test and main line running test.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.519-524
• /
• 2008

The tilting trains can run curve track about 30% faster than conventional train without affecting passenger comfort. As the tilting trains offer the optimum means of providing faster and more comfortable rail service with minimum of environmental disturbance and capital investment, it is widely adopted for commercial operation all over the world. Over several years, the Korea Railroad Research Institute(KRRI) and Ministry of Construction and Transportation(MOCT) have been developing 200 km/h Korean tilting train, Hanvit200. Hanvit200 adopt the pendulum type tilting mechanism and hybrid car body structure, mainly CFRP combined with steel. In this paper the vibrational characteristics of Hanvit200 was investigated through Eigen vector analysis, Modal Test and main line running test.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.888-893
• /
• 2000

This experimental study is the improvement of running stability for freight car. KNR (Korean National Railroad)'s conventional wagons, light bodies running on Barber style bogies with 5-1/$2{\times}10$ journals, would be considered fundamentally to be a most difficult car to control above 100km/h. From the results of experiment, to permit high speed operation safely, was realized with the resilient side bearing. Also, equipped with resilient side bearing, and elastowedge friction elements to eliminate bolster wedge pocket wear, KNR's wagons can be secure the running stability with lower maintenance requirements than current experience.

• 한국철도학회논문집
• /
• 제18권4호
• /
• pp.289-300
• /
• 2015

철도 전동 소음은 철도에서 발생하는 대표적인 소음으로서 차륜과 레일의 음향 조도에 의해 가진 된 차륜 및 레일의 진동으로부터 발생한다. 철도 전동 소음 해석 시 레일 방사 소음은 자유 공간에 놓인 레일의 음향 방사 파워를 이용해 원거리에서 계산하므로, 일반적으로 소음원 모델에 지면 반사를 고려하지 않는다. 그러나 레일 주위의 근접 음장을 해석하고 저감 대책을 적용하기 위해서는 지면에 의한 음파의 반사를 고려해야 한다. 본 논문에서는 파수유한요소/경계요소법을 이용해 지면에 의해 발생하는 레일 소음의 변화와 그 특성을 살펴보았다. 해석은 먼저 레일이 강체 지면에 부착된 경우와 레일 패드 높이만큼 강체 지면에서 이격된 경우에 대해 방사효율을 구하고 그 결과를 비교하였다. 이를 통해 레일과 강체 지면의 이격 여부에 따라 레일 방사 소음에 크게 변화함을 확인하였다. 둘째로는 지면에 임피던스 경계조건을 부여하고 레일에서 방사되는 음향 파워 및 지향 특성의 변화를 살펴보았다.

• 한국철도학회논문집
• /
• 제16권2호
• /
• pp.85-92
• /
• 2013

철도 전동 소음은 철도에서 발생하는 대표적인 소음으로서 차륜과 레일의 음향 조도에 의해 유기된다. 철도 전동 소음의 주요 소음원으로는 침목, 레일 그리고 차륜을 들 수 있다. 따라서 철도의 전동 소음을 해석하기 위해서는 차륜의 진동 특성과 함께 궤도의 진동을 해석하고 그 특성을 이해하는 작업이 수행되어야 한다. 본 논문에서는 전동 소음의 관점에서 레일의 진동을 해석하기 위한 이론적 궤도 모델링에 대해 기술하고, 국내의 대표적인 세 가지 철도 궤도에 대해 진동 해석을 수행하였다. 해석에 사용한 궤도로는 기존선 자갈 도상 궤도, KTX 자갈 도상 궤도, KTX 콘크리트 궤도를 선정하였으며, 각 궤도 별로 레일을 따라 진행하는 파동의 전파 특성을 해석하고 그 결과를 비교하였다. 해석 시 궤도는 이산 지지를 가진 Timoshenko 보로 모델링하였으며, 레일의 평균 진동 속도를 이용해 세 궤도 레일의 방사 소음 특성을 간접 비교하였다.

• 한국정보통신학회논문지
• /
• 제20권1호
• /
• pp.52-57
• /
• 2016

다중 경로 약한 산란 (poor scattering) 전 이중 (full-duplex) 시스템에서 혼성 스케줄링을 소개한다. 제안하는 시스템은 다중 안테나를 갖는 하나의 전 이중 기지국과 수 많은 단일 안테나 반 이중 (half-duplex) 단말로 구성된다. 혼성 스케줄링은 송신기에서의 부분적 채널 정보만을 활용한다. 특별히, 상향링크 및 하향링크에서 모두 기회적 송신 기술을 사용하는 기존 스케줄링 방법과는 달리, 제안하는 기술은 하향링크에서의 랜덤 송신 빔형성 및 상향링크에서의 간섭 제거 빔형성을 결합하여 사용한다. 주요 결과로써, 컴퓨터 모의실험을 통해 제안한 기술이 기존 스케줄링 방법보다 특정 신호 대 잡음비 영역 이상에서 훨씬 더 우수한 합 용량 성능을 가짐을 보인다.

• 비파괴검사학회지
• /
• 제33권3호
• /
• pp.283-288
• /
• 2013

This paper describes development of a high speed Doppler OFDI system for non-invasive vascular imaging. Doppler OFDI (optical frequency domain imaging) is one of the phase-resolved second generation OCT (optical coherence tomography) techniques for high resolution imaging of moving elements in biological tissues. To achieve a phase-resolved imaging, two temporally separated measurements are required. In a conventional Doppler OCT, a pair of massively oversampled successive A-lines is used to minimize de-correlation noise at the expense of significant imaging speed reduction. To minimize a de-correlation noise between targeted two measurements without suffering from significant imaging speed reduction, several methods have been developed such as an optimized scanning pattern and polarization multiplexed dual beam scanning. This research represent novel imaging technique using frequency multiplexed dual beam illumination to measure exactly same position with aimed time interval. Developed system has been verified using a tissue phantom and mouse vessel imaging.

• The Journal of the Acoustical Society of Korea
• /
• 제17권3E호
• /
• pp.43-46
• /
• 1998

Many of the active noise control system utilize a form of the least mean square(LMS) algorithm. This paper discusses the dependence of the convergence rate on the acoustic error path in the popular algorithm which is conventional "filtered-x LMS" and introduces new algorithm "constrained filtered-x LMS". The proposed method increase the convergence region regardless of the time-delay in the acoustic error path. In the algorithms, coefficients of the controller are adapted using the residuals of constrained structure which are defined in such a way that the control process become stationary. Advantages of constrained filtered-x LMS algorithm is illustrated by convergence analysis in the mean sense.