• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.7
• /
• pp.1-7
• /
• 2013

LED lamps are appropriate to the light source for use in broadcasting lighting. When the lighting frequency of LED lamp is different from the shutter frequency of camera, however, the flicker appears on the moving image which is taken by the camera under the dimmed light of LED lamp with conventional dimming methods. In this study, a new dimming method for the LED lamps used as the broadcasting lighting is proposed to minimize the flicker. A lighting period in the proposed dimming method is divided into the several sub-periods which have weight of the bits. Also, the proposed dimming method has characteristics that are optimizing the turn-on timings of two LED lamps to reduce the turn-off periods of the lamps and not to overlap the turn-on periods of the lamps. In the experiments, the incidence of the flicker is taken by the camera under several lighting conditions of the conventional dimming methods and the proposed dimming method. In addition, the brightness values of the frames are obtained in the moving image, and incidence of the flicker is evaluated and compared with conventional methods. From the results, the incidence of the flicker in the proposed method is more improved than the conventional methods.

• Journal of Korea Multimedia Society
• /
• v.5 no.4
• /
• pp.450-457
• /
• 2002

Conventional channel estimation methods for OFDM system have not the robust characteristics relating to various mobile speed. To solve this drawback in conventional methods, we propose the channel estimation method for OFDM, which has a good performance and computational complexity in consideration of other methods. Proposed method uses a block frame structure within a whole channel in contrast with conventional methods such as PSAM and ESAE. This concept prevents overall performance from diverging or showing a poor one. The analytical results demonstrate the proposed method outperforms PSAM and ESAE in terms of MSE and BER performance under all Rayleigh fading environment. Considering the simulation performance and computational complexity, proposed method shows better characteristics than conventional methods for OFDM and has not an error floor even in a severe Rayleigh fading environment.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.4
• /
• pp.63-67
• /
• 2004

The conventional typical techniques as fast codebook generation methods are PDS, FNNS, and FC. In this paper, we propose FCNNPDS integrated the conventional methods to generate a codebook. The results of simulations show that the computational magnitude of FCNNPDS is reduced to 40-95% lower than conventional techniques. But comparison computation has no relation with k dimension of vectors, that is, because the computational magnitude of comparison is smaller than others, therefore FCNNPDS may be the best method than the conventional methods.

• Journal of the East Asian Society of Dietary Life
• /
• v.25 no.5
• /
• pp.850-859
• /
• 2015

For development of food of Jong-ga (Jeonju Hakindang) and its commercialization, this study investigated physico-chemical properties and quality characteristics of Mannaji (boiled beef down in Korean soy sauce) prepared with conventional or pre-heating methods during storage period (0, 4, 8, 12, 16, and 20 weeks) at $4^{\circ}C$. As storage period passed, pH decreased in both conventional and pre-heating methods. Forchromaticity, brightness ($L^*$) significantly decreasedwhile redness ($a^*$) and yellowness ($b^*$) significantly increased during storage period. After 4 weeks of storage, hardness of Mannaji with conventional methods was higher compared to before storage. Thiobarbituric acid reactive substances (TBARS) of both conventional and pre-heating methods increased above 1.2 MDA mg/km, which is the acceptable criteria for intake. Although volatile basic nitrogen (VBN) values slightly increased in 4 weeks of storage, there were no significant differences in VBN and maintained food acceptable level until 20 weeks of storage. Sensory panelists showed preference for Mannaji with pre-heating methods compared to conventional methods.

• Structural Engineering and Mechanics
• /
• v.75 no.3
• /
• pp.311-325
• /
• 2020

In applying the spectral stochastic finite element methods to the frequency response analysis, the conventional methods are known to give unstable and inaccurate results near the natural frequencies. To address this issue, a new sensitivity based stabilized formulation for stochastic frequency response analysis is proposed in this paper. The main difference over the conventional spectral methods is that the polynomials of random variables are applied to both numerator and denominator in approximating the harmonic response solution. In order to reflect the resonance behavior of the structure, the denominator polynomials is constructed by utilizing the natural frequency sensitivity and the random mode superposition. The numerator is approximated by applying a polynomial chaos expansion, and its coefficients are obtained through the Galerkin or the spectral projection method. Through various numerical studies, it is seen that the proposed method improves accuracy, especially in the vicinities of structural natural frequencies compared to conventional spectral methods.

• Journal of the Korean Society of Tobacco Science
• /
• v.20 no.1
• /
• pp.26-32
• /
• 1998

This study was conducted to obtain the basic information on the burley tobacco (Nicotiana tabacum L.) curing methods. The effects of the three kinds of curing methods on the dry weight losses during curing, chemical contents and physical properties of cured leaves, and organoleptic and smoking qualities were observed. The dry weight losses during curing was the highest in the stalk curing, and the lowest in the conventional priming. The longer the curing periods was, the more the loss of dry weight. The percent of the excessive dried leaves was high and the price per kilogram was low in the conventional priming. The chemical contents and the physical properties of the cured leaves in the conventional priming were similar to those of yellowing or browning stage of curing. But, the chemical contents and the physical properties of the cured leaves in the stalk curing were comparable to those of the air curing. The smoking quality was the best in the stalk curing.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.3
• /
• pp.163-175
• /
• 1996

This paper invetigates estimation methods of mapping parameters in object-oriented coding. In this paper, we propose a fast parameter estimation method with its performance similar to that of the conventional methods. We employ hierarchical structure in difference images to redcue the computational complexity and also combine conventional six- and eight-mapping parameter estimation methods to compensate for the performance degradation caused by employment of hierarchical structure. Computer simulation shows that the proposed mehtod gives results similar to conventional methods with greatly reduced computational complexity.

• Journal of Construction Engineering and Project Management
• /
• v.4 no.3
• /
• pp.21-32
• /
• 2014

The practiced conventional methods for maintenance management in Malaysian Polytechnic faced many issues due to poor service delivery, inadequate finance, poor maintenance plan and maintenance backlogs. The purpose of this study is to improve the conventional method practices which tend to be ineffective in Malaysian Polytechnic. The case studies were conducted with eight Polytechnics and are selected based on conventional method practices and its major problems. There are around 32 Polytechnics in Malaysia and almost are using conventional methods. The number is considered very big indicating that the use of modern Information and Communication Technology (ICT) is still very limited compared to other institutions of higher learning in Malaysia. The overall findings of this research indicated; poor service delivery, inadequate financial, poor maintenance planning and maintenance backlogs. There is also need to overcome less man power competencies of maintenance management practices which existed with all eight Polytechnics. The proposed system is intended to be used for maintenance management practices at Malaysian Polytechnics in order to provide high-quality of building facility with safe and healthy environments.

• Imaging Science in Dentistry
• /
• v.33 no.4
• /
• pp.199-205
• /
• 2003

Purpose: To compare the visibility of the mandibular canal at the different radiographic methods such as conventional panoramic radiographs, Vimplant multi planar reformatting (MPR)-CT panoramic images, Vimplant MPR-CT paraxial images and film-based DentaScan MPR-CT images. Materials and Methods: Data of 11 mandibular dental implant patients, who had been planned treatment utilizing both panoramic and MPR-CT examination with DentaScan software (GE Medical systems, Milwaukee, USA), were used in this study. The archived axial CT data stored on CD-R discs were transferred to a personal computer with 17' LCD monitor. Paraxial and panoramic images were reconstructed using Vimplant software (CyberMed Inc., Seoul, Korea). Conventional panoramic radiographs, monitor-based Vimplant MPR-CT panoramic images, monitor-based Vimplant MPR-CT paraxial images, and film-based DentaScan MPR-CT images were evaluated for visibility of the mandibular canal at the mental foramen, 1 cm, 2 cm, and 3 cm posterior to mental foramen using the 4-point grading score. Results: Vimplant MPR-CT panoramic, paraxial, and DentaScan MPR-CT images revealed significantly clearer images than conventional panoramic radiographs. Particularly at the region 1 em posterior to mental foramen, conventional panoramic radiographs showed a markedly lower percentage of 'excellent' mandibular canal images than images produced by other modalites. Vimplant MPR-CT and DentaScan MPR-CT images did not show significant difference in visibility of the mandibular canal. Conclusion: The study results show that Vimplant and DentaScan MPR-CT imaging systems offer significantly better images of the mandibular canal than conventional panoramic radiograph.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.21 no.1
• /
• pp.127-135
• /
• 1991

This study purports to make in consideration of the recent xeroradiographic development an exact analysis, by comparison, of conventional cephalometry and xeroradiographic cephalometry that are indispensably utilized in the field of orthodontics as a means of cephalometric measuring For that purpose attached to ten landmarks on a dry skull was a lead ball, a radio-opaque substance, and projected X-ray beam one time each by means of the two methods, and then ten times each without change of locations of the skull, in the state in which the lead ball was removed. These data were committed to ten dentists for tracing to determine a difference between the same kind of cephalometries. A computerized statistic analysis of the data shows findings, as follows: 1. Conventional cephalometry shows higher accuracy in Nasion, as compared with xeroradiographic cephalometry. 2. Xeroradiographic cephalometry is found more accurate in Anterior Nasal Spine, 'A' Point, Pogonion, Gonion, Porion, Prosthion and Orbitale than conventional cephalometry. 3. There is no difference between both methods in Basion. 4. At test between the two methods by all the dentists reveals that xeroradiographic cephalometry is more accurate than conventional cephalometry.