• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.621-626
• /
• 2019

The driver's steering wheel maneuver is a typical disturbance that causes excessive body motion and traveling instability of a vehicle. Abrupt and extreme operation can cause rollover depending on the geometric and dynamic characteristics, e.g., SUV vehicles. In this study, to cope with the performance limitation of conventional cars, fundamental research on the structurization of a control system was performed as follows. Mathematical modeling of the lateral behavior induced by driver input was carried out. A controller was designed to reduce the body motion based on this model. An algorithm was applied to secure robust control performance against modeling errors due to parameter uncertainty, $H_{\infty}$. Using the decoupled 1/4 car, a dynamic load simulating model considering the body moment was suggested. The simulation result showed the validity of the load-simulating model. The framework for a lateral behavior control system is proposed, including an experimental 1/4 vehicle unit, load simulating module, suspension control module, and hardware-in-the-loop simulation technology.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.4
• /
• pp.289-299
• /
• 2019

Attitude control modeling and simulation (M&S) can be extensively applied in overall development process, from simple algorithm design to on-board software verification. This paper introduces CMG-based attitude control M&S software, which consists of 6-DOF modeling (CMG and space environments modeling), and attitude control algorithm. The M&S software is divided into three modules, from an inner CMG motor control module to an outer earth observation mission module. While an application of this developed software is currently limited to the initial-phase attitude controller development, its application area can be extended to the later-phases by considering sophisticated model information in future.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.5
• /
• pp.709-718
• /
• 2021

As regulations on environmental pollution of ships have been strengthened, interest in smart ships such as electric propulsion ships equipped with hybrid power systems is increasing. Since batteries used in electric propulsion ships have a larger capacity than batteries used in vehicles, the price is high and maintenance is considered important. The ship's battery is manufactured as an integral type and is managed by the battery management system, and the maintenance and repair of the battery is performed through the replacement of the battery. we design and implement a battery module and a control algorithm using pre-cell for easy battery management. In addition, a controller is designed to transmit the data necessary for the electric propulsion ship power system control to the power control system. When a battery to which the corresponding spare-cell is applied is used, the stability of the ship and the battery system is increased, and it can have an advantage in terms of maintenance and repair.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.55-57
• /
• 2022

In this study, a customized semi-passive RFID receiver module was implemented for in-VIVO deep tissue photo-therapy. A novel wireless technique is required due to a limitation of RF communication in body environment, as internal body has a complex structure such as, skin, fat, skeleton, water, and so on. Recently, coherently incoherent beamforming (CIB) based on RFID was introduced and it is able to transmit wireless signal with high reliability under the incoherent condition such as in-VIVO deep tissue. The proposed miniature photo capsule based on RFID consists of miniature controller, ultra small LED array and wireless RFID chip. RF Reader can access with standard RFID protocol (ISO 18000-6c) using UHF RFID antenna, a control command is wirelessly writtern on USER Bank memory. With received control command, therapy LED array dims with mulilevel under timer control. The signal process of designed RFID photo therapy capsule is analyzed and evaluated under the various environments in detailed.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.3
• /
• pp.13-26
• /
• 2009

In this raper, We propose the alternative solution, RTOS-based system to replace the PLC 4hat has used the automation system for industrial processes. RTOS-based system is constructed the PC and RTOS as hardware and software. It overcomes the limit of PLC and guarantees the stability and reliability. Also, PC has better performance and cheaper than PLC when operating and constructing the system. For many manufactures, these benefits alone are all the reason they need to switch from PLC-based system to RTOS-based system. To use the RTOS-based System, the PLC program needs the conversion to the RTOS task. And how to transform is the most important issue. So, we propose conversion method through the system model. The system model defines the operation of each module as the task after the system divided into module. Because the system divided into modules can control, the performance and the functionality of system improve, and the system can deal with a problem easily when repairing and changing.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.2
• /
• pp.263-271
• /
• 1994

Automation of production in modern manufacturing is based on the integration of the various stage of production process by means of processing system. Information processing and network interface are of fundamental importance in programmable device in industrial automation, as they essential in order to active integration in production lines. In this paper, TBC(token bus controller) in the Mini-MAP board performs the function of the MAC sublayer, The LLC sublayer is implemented according to the specification of Class 3 that includes Type 1 and 3. And the MMS services are designed within the scope of implementation MAP 3.0 All the softwares are implemented under the real time executive for real time application of the Mini-MAP and they are loaded into PROMs at the network board. We tested the LLC functions to make use of a protocol analyzer for the token bus protocol. Also the MMS conformance test was carried out by exchanging primitives between a model system(including NIU) and a MMS product that had already passed the conformance the conformance test based on measurement method of network analysis.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.71-78
• /
• 2015

Since most education organizations such as Universities have a plenty of PCs, much electric power can be wasted if their power states are not managed properly. This paper introduces the RPM(Remote Power Management) software system implemented to reduce a waste of PC power in Universities. The System manager can monitor power state of all PCs in a University and turn off PCs or change power states of PCs to low power states. The RPM consists of three software modules. First, Power Controller, which is installed in each user PC, saves the power by changing low power state by utilizing low power algorithm proposed in this paper. Also it reports power state of its PC to Power Server on the state changed. Second, Power Server module gathers power state information of all PCs, stores them in a DB, and sends all or some parts of the information to Power Viewer whenever the manager asks. The manager can turn off or change a certain PC to low power state. We evaluated the performance of power saving for the RPM and the result showed achievement of 40% power saving.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.6
• /
• pp.842-848
• /
• 2011

A fabricated hybrid control board using multi-communication is designed with a low power 8-bit microcontroller, ATxmega128A1. The microcontroller consists of 8 UART (Universal asynchronous receiver/transmitter) ports, 2 kbytes EEPROM, 128 kbytes flash memory, 8 kbytes SRAM. The 8 URAT ports are used for a multi-communication modem, a GPS module, etc. The EEPROM is used for saving a configuration for running programs, and the flash memory of 128 kbytes is used for storing a F/W (Firm Ware), and the 8 kbytes SRAM is used for stack and for storing memory of global variables while running programs. If we use the multi-communication of CDMA, TRS and RF to remotely control Aid to Navigation, it is able to remove the communication shadow area. Even though there is a shadow area for an individual communication method, we can select an optimal communication method. The compatibility of data has been enhanced as using of same data frame per communication device. For the test, 8640 of data have been collected from each buoy during 30 days in every 5 minutes and the receiving rate of the data has shown more than 85 %.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.593-596
• /
• 2005

The MSC is a remote sensing instrument with very high performance that is to be installed on KOMPSAT2 satellite. The MSC consists of EOS (Electro-Optic Subsystem), PMU (Payload Management Unit) and PDTS (Payload Data Transmission Subsystem). PMU controls and monitors all the other payload units by sending commands and collecting telemetry. PMU is in charge of interfacing between payload system and satellite bus system. PMU gets commands from ground-station via OBC (On-Board Computer) that is a main controller of the satellite bus system and sends telemetry to the ground-station via OBC. There is a processor module, called SBC (Single Board Computer) in the PMU. The SBC is a main controller of the MSC system. The main roles of the SBC are payload mission management, command validation and execution, telemetry collection and monitoring, ancillary data handling, event reporting, power control of payload sub-units and communication with these units. Intel's 80486DX2 processor has been used for the SBC. Due to the fact that the SBC plays important roles for imaging mission execution and handles a lot of control data that is required for payload operation, it is required to make analysis of the CPU load when it is in maximum operation mode. In this paper, the analysis and measurement results of the SBC throughput in the maximum operation mode.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.6
• /
• pp.1301-1306
• /
• 2015

This paper is to automate the intelligent and equipment to recycle the volatile organic compounds in various a gas stations and a laundry, in real life. In addition, based the ZigBee module and TCP/IP communications on ICT technologies, it's propose an integrated management system to monitor and manage an liquid at a remote location.Furthermore, it's propose a service model that can be freely managed from a remote location based on the app on android. In this paper, we present a communication protocol of the bridge modules and a liquefier of intelligent control system based ZigBee and MCU(Micro Controller Unit). Through the development of smart app based android mobile services in an integrated management system, it's represent for liquefier to a DB server for remote management(MS SQL 2012) and a web server (OS: Windows 2008).