• 조명전기설비학회논문지
• /
• 제14권3호
• /
• pp.49-58
• /
• 2000

본 논문에서는 FACTS(Flexible AC Transnission System)로 분류되는 여라 기기중 기존의 전압제어 및 무효 전력보상기들이 가지고 있는 바속응성과 불연속성 문제를 해결해줄 수 있는 정지형 무효전력 보상가(Static Var Compensator : SVC)를 포함한 전력계통에 신경회로망 제어기를 적용하여 안정화에 관하여 연구하였다. 제안된 신경회로망 제어기는 오차와 오차변화량을 입력하는 오차역전과 학습 알고리즘을 사용하고, 학습시간올 단축하기 위해 모멘텀 방법을 사용하였다. 제안된 방법의 강인섬을 입증하기 위해 중부하시 및 정상부하시에 초기 전력을 변동시킨 경우와 초기에 회천자각을 변동시킨 경우에 대하여 시스렘의 회전자각, 각속도 편차 특성 및 단 자전압의 동특성을 고찰하여 다른 시스템보다 응답특성이 우수합을 보였다.

• 시스템엔지니어링학술지
• /
• 제12권1호
• /
• pp.73-87
• /
• 2016

Combining power generation and water production by desalination is economically advantageous. Most desalination projects use fossil fuels as an energy source, and thus contribute to increased levels of greenhouse gases. Environmental concerns have spurred researchers to find new sources of energy for desalination plants. The coupling of nuclear power production with desalination is one of the best options to achieve growth with lower environmental impact. In this paper, we will per-form a sensitivity study of coupling nuclear power to various combinations of desalination technology: {1} thermal (MSF [Multi-Stage Flashing], MED [Multi-Effect Distillation], and MED-TVC [Multi-Effect Distillation with Thermal Vapour Compression]); {2} membrane RO [Reverse Osmosis]; and {3} hybrid (MSF-RO [Multi-Stage Flashing & Reverse Osmosis] and MED-RO [Multi-Effect Distillation & Reverse Osmosis]). The Korean designed reactor plant, the APR1400 will be modeled as the energy production facility. The economical evaluation will then be executed using the computer program DEEP (Desalination Economic Evaluation Program) as developed by the IAEA. The program has capabilities to model several types of nuclear and fossil power plants, nuclear and fossil heat sources, and thermal distillation and membrane desalination technologies. The output of DEEP includes levelized water and power costs, breakdowns of cost components, energy consumption, and net saleable power for any selected option. In this study, we will examine the APR1400 coupled with a desalination power plant in the Kingdom of Saudi Arabia (KSA) as a prototypical example. The KSA currently has approximately 20% of the installed worldwide capacity for seawater desalination. Utilities such as power and water are constructed and run by the government. Per state practice, economic evaluation for these utilities do not consider or apply interest or carrying cost. Therefore, in this paper the evaluation results will be based on two scenarios. The first one assumes the water utility is under direct government control and in this case the interest and discount rate will be set to zero. The second scenario will assume that the water utility is controlled by a private enterprise and in this case we will consider different values of interest and discount rates (4%, 8%, & 12%).

• 멤브레인
• /
• 제20권2호
• /
• pp.135-141
• /
• 2010

다양한 형태의 Polysulfone 막을 MBR공정에 적용하기 위해 제조하였다. 특히 제조공정에 있어서 여러 형태의 에테르형 알코올을 사용 도프용액에 첨가시킴으로써, 공경크기에 미치는 영향력을 조사하였다. 본 연구에서는 공경의 크기는 첨가된 첨가제의 끓는점에 의한 영향력보다는 그들 자체(첨가된 첨가제)의 분자구조에 의한 확산에 더 큰 영향력을 받고 있음을 보여주었다. 분자적으로 methoxy ($CH_3$-O-) < secondary propanol ($-CH_2$-CH(OH)$-CH_3$) < ethoxy ($CH_3-CH_2-O-$)의 순으로 공경크기가 커지고 그에 따라 순수투과도 또한 커짐을 보여주었다. 이러한 현상은 첨가된 용매가 분자적으로 ether형 알코올의 bulky한 정도에 따라 공경의 형성이 다른 형태로 나타나고 있음을 보여주고 있다. 본 연구에서는 다양한 형태의 ether형 alcohol를 통하여 바라고자하는 형태(평균 pore size 0.1~0.4 ${\mu}m$)의 MF (microfiltration)막을 제조할 수 있었으며, MBR (membrane bio-reactor)에 적용한 결과 2달 동안 안정되게 운전되었다.

• 공업화학
• /
• 제29권5호
• /
• pp.626-629
• /
• 2018

연료전지는 높은 연료유연성을 갖고 있어, 탄소 및 탄화수소 등을 통해서도 전기를 생산할 수 있다. 하지만 이러한 연료원을 사용한 경우, 불안정한 장기 구동성능이 종종 관측된다. 본 연구에서는 반응기 내부에 존재하는 탄화수소가 장기 구동성능을 불안정하게 함을 밝힌다. 본 연구진은 비활성기체인 아르곤을 이용하여 산화극 반응기 내부의 가스화경로를 예측하고, 이를 통해 탄화수소의 영향을 억제하여 불안정한 장기 구동성능을 극복한다. 더 나아가, 산화극 반응기 내부에 이산화탄소를 공급하여 역부드아반응을 유도한다. 역부드아반응을 통해 탄소연료전지에서 연료로 사용될 수 있는 일산화탄소를 만들어낸다. 과도한 이산화탄소의 주입은 오히려 연료손실 등의 문제를 야기함을 확인한다. 따라서, 본 연구에서는 이산화탄소 공급량의 최적화가 중요함을 밝히고, 이를 통해 연료전지 구동 성능을 안정화한다.

• 동력기계공학회지
• /
• 제18권5호
• /
• pp.122-128
• /
• 2014

Generally, the mechanical components and structures are joined by many welding techniques, and therefore the welded joints are inevitable in the construction of structures. The Alloy 617 was initially developed for high temperature applications above $800^{\circ}C$. It is often considered for use in aircraft and gas turbines, chemical manufacturing components, and power generation structures. Especially, the Alloy 617 is the primary candidate for construction of intermediate heat exchanger (IHX) on a very high temperature reactor (VHTR) system. In the present paper, the low cycle fatigue (LCF) life of Alloy 617 base metal (BM) and the gas tungsten arc welded (GTAWed) weld joints (WJ) are evaluated by using the previous experimental results under strain controlled LCF tests. The LCF tests have been performed at room temperature with total strain ranges of 0.6, 0.9, 1.2 and 1.5%. The LCF lives for the BM and WJ have been evaluated from the Coffin-Manson and strain energy based life methods. For both the BM and WJ, the LCF lives predicted by both Coffin-Manson and strain energy based life methods was found to well coincide with the experimental data.

• 비파괴검사학회지
• /
• 제30권5호
• /
• pp.451-457
• /
• 2010

본 연구에서는 합금강의 미세조직 특성인 결정립과 석출물이 초음파 비선형성에 미치는 영향을 실험적으로 연구하였다. 원자로 압력용기 재료인 SA508 Gr.3 저합금강을 오스테나이징과 템퍼링 조건을 변화시켜 모상의 오스테나이트 결정립 크기와 석출물 크기를 제어하였다. 결정립과 석출물 모두 크기가 조대해 짐에 따라 초음파 비선형 파라미터는 낮아지는 경향을 보이므로 초음파 비선형성이 결정립과 석출물과 밀접한 상관성이 있음을 알 수 있었다. 모상의 오스테나이트 결정립이 성장하더라도 패킷과 래스 하부업계의 영향으로 초음파 비선형 파라미터는 큰 변화를 보이지 않았다. 석출물의 영향으로 석출물의 크기 외에 정합변형을 일으키는 $Mo_2C$의 감소로 인해 초음파 비선형 파라미터가 큰 감소를 나타내었다. 본 연구결과 초음파 비선형성을 측정하므로써 결정립과 석출물의 미세조직 특성을 평가하는 것이 가능하다.

• 한국재료학회지
• /
• 제17권7호
• /
• pp.366-370
• /
• 2007

Silicon nitride ($Si_3N_4$) ceramics have been considered for various components of nuclear power plants such as the mechanical seal of a reactor coolant pump (RCP), the guide roller for a control rod drive mechanism (CRDM), and a seal support, etc. Corrosion behavior of $Si_3N_4$ ceramics in a high-temperature and high-pressure water must be elucidated before they can be considered as components for nuclear power plants. In this study, the corrosion behaviors of $Si_3N_4$ ceramics containing MgO and $Al_2O_3$ as sintering aids were investigated at a hydrothermal condition ($300^{\circ}C$, 9.0 MPa) in pure water and 35 ppm LiOH solution. The corrosion reactions were controlled by a diffusion of the reactive species and/or products through the corroded layer. The grain-boundary phase was preferentially corroded in pure water whereas the $Si_3N_4$ grain seemed to be corroded at a similar rate to the grain-boundary phase in LiOH solution. Flexural strengths of the $Si_3N_4$ ceramics were significantly degraded due to the corrosion reaction. Results of this study imply that a variation of the sintering aids and/or a control (e.g., crystallization) of the grain-boundary phase are necessary to increase the corrosion resistance of $Si_3N_4$ ceramics in a high-temperature water.

• 대한기계학회논문집A
• /
• 제41권3호
• /
• pp.193-198
• /
• 2017

Alloy 617은 초고온가스로(VHTR)의 중간열교환기(IHX)의 유력한 후보 재료 중의 하나이다. $850^{\circ}C$의 고온에서 Alloy 617 용접재의 저사이클 피로 거동을 고찰하기 위하여, 완전 양진 변형률제어 피로시험이 0.6에서 1.5%의 전변형률범위에서 수행되었다. 용접재 시험편은 V-그루브 형상의 가스텅그스텐아크 용접한 용접 패드로부터 가공되었다. 피로수명은 전변형률범위가 증가할수록 감소하였다. 모든 실험조건에서 Alloy 617 용접재 시험편의 반복 응력 반응 거동은 초기 수 사이클에서 반복 변형률 경화현상을 나타내었다. 또한 모든 피로 균열의 발생과 전파는 입내파괴의 파손 모드를 보였다.

• Nuclear Engineering and Technology
• /
• 제30권5호
• /
• pp.403-415
• /
• 1998

The CANDU 6 reactor assembly consists of an array of 380 pressure tubes, which are installed horizontally in a large cylindrical vessel, the Calandria, containing the low pressure heavy water moderator. The pressure tube is located inside the calandria tube and the annulus between these tubes, which forms a closed loop with $CO_2$ gas recirculating, is called the Annulus Gas System(AGS). It is designed to give an alarm to the operator even for a small pressure tube leak by a very sensitive dew point meter so that he can take a preventive action for the pressure tube rupture incident. To judge whether the operator action time is enough or not in the design of Wolsong 2,3 & 4, the Leak Before Break(LBB) assessment is required for the analysis of the pressure tube failure accident. In order to provide the required data for the LBB assessment of Wolsong Units 2, 3, 4, a series of leak detection capability tests was performed by injecting controlled rates of heavy water vapour. The data of increased dew point and rates of rise were measured to determine the alarm set point for the dew point rate of rise of Wolsong Unit 2. It was found that the response of the dew point depends on the moisture injection rate, $CO_2$ gas flow rate and the leak location. The test showed that CANDU 6 AGS can detect the very small leaks less than few g/hr and dew point rate of rise alarm can be the most reliable alarm signal to warn the operator. Considering the present results, the first response time of dew point to the AGS $CO_2$ flow rate is approximated.

• Journal of Microbiology and Biotechnology
• /
• 제18권11호
• /
• pp.1809-1818
• /
• 2008

Biotechnological treatment of sulfate- and metal-ions-containing acidic wastewaters from mining and metallurgical activities utilizes sulfate-reducing bacteria to produce sulfide that can subsequently precipitate metal ions. Reducing sulfate at a low pH has several advantages above neutrophilic sulfate reduction. This study describes the effect of sulfide removal on the reactor performance and microbial community in a high-rate sulfidogenic gas-lift bioreactor fed with hydrogen at a controlled internal pH of 5. Under sulfide removal conditions, 99% of the sulfate was converted at a hydraulic retention time of 24 h, reaching a volumetric activity as high as 51 mmol sulfate/l/d. Under nonsulfide removal conditions, <25% of the sulfate was converted at a hydraulic retention time of 24 h reaching volumetric activities of <13 mmol sulfate/l/d. The absence of sulfide removal at a hydraulic retention time of 24 h resulted in an average $H_2S$ concentration of 18.2 mM (584 mg S/I). The incomplete sulfate removal was probably due to sulfide inhibition. Molecular phylogenetic analysis identified 11 separate 16S rRNA bands under sulfide stripping conditions, whereas under nonsulfide removal conditions only 4 separate 16S rRNA bands were found. This shows that a less diverse population was found in the presence of a high sulfide concentration.