• International Journal of Industrial Entomology and Biomaterials
• /
• v.17 no.2
• /
• pp.201-203
• /
• 2008

A field study on self trap cropping system in controlling tukra mealy bug Maconellicoccus hirsutus Green) incidence on mulberry (Morus spp.; V-1 variety; $3'{\times}3'$ spacing) gardens was undertaken in selected sericulture farmers' mulberry gardens of Pydeti village (Parigi Mandal, Anantapur District, Andhra Pradesh, India). The study was conducted for three years (2004, 2005 and 2006). Four treatments (T0; control/no treatment, T1; self trap cropping rows with 10 row interval, T2; self trap cropping rows with 10 row interval and treating these rows only with 0.5% neem oil emulsion and T3; self trap cropping rows with 10 rows intervals and treating all the mulberry rows including self trap cropping rows with 0.5% neem oil emulsion) were considered. The results indicated that the incidence increased in T0 and T1 while the same suppressed in T2 and T3. The suppression (%) of tukra incidence between T2 and T3 was not significant. Hence, T2 only was recommended to farmers as its economical viable practice. The results are discussed based on the importance of tukra, its suppression and cost of treatment.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.4
• /
• pp.11-19
• /
• 2001

In this paper, we study the convergence property of iterative learning control (ILC). First, we present a new method to prove the convergence of ILC using sup-norm. Then, we propose a new type of ILC algorithm adopting intervalized learning scheme and show that the monotone convergence of the output error can be obtained for a given time interval when the proposed ILC algorithm is applied to a class of linear dynamic systems. We also show that the divided time interval is affected from the learning gain and that convergence speed of the proposed learning scheme can be increased by choosing the appropriate learning gain. To show the effectiveness of the proposed algorithm, two numerical examples are given.

• Journal of Oral Medicine and Pain
• /
• v.17 no.2
• /
• pp.129-149
• /
• 1992

In order to verify the acceleration effect of low level laser (LLL) on oral mucosal wound healing process at cell biological level, the author studied growth pattern and ultrastructure in human gingival fibroblasts flashed by GaAlAs LLL-830 nm, 15mW for 10 minutes/flash one to three times at interval of 3-4 days through the evaluation of cell growth rate, protein conent/cell, DNA content/cell and ultrastructural changes for 14 days. The results were as follows : 1. The growth rate in gingival fibloblasts treated by LLL showed 4 orderly stages-decreasing stage after LLL treatment, acute increasing stage 3 days after LLL treatment, restring stage and recovering stage. 2. The effect of multiple flashes on LLL at interval of 3 days more or less was not proportional to times of flash on acceleration of growth in gingival fibroblasts. 3. The total protein content per gingival fibroblast was not significantly changed by LLL treatment in comparison with control group. But some kinds of protein which might be cell growth promoting factors were decreased immediately after LLL treatment, thereafter were acutely increased in cellular protein profile. 4. In ultrastructural changes of gingival fibroblasts treated by LLL, more prominent rough endoplasmic reticulum, mitochondrial hyperplasia/hypertrophy and increased extracellular fibrillar matrix were observed in comparison with control group under same experimental period.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.479-482
• /
• 2001

This paper proposes a modified $\alpha$ conduction mode for controlling the output voltage magnitude of three-phase square-wave VSIs with an R-L load. From the viewpoint of both power capacity and switching losses, three-phase square-wave inverters are now used in most high power systems. When the square-wave VSI is driven with $\alpha$ conduction mode to control the magnitude of output voltages, interval over than half period is operated with $180^{\circ}$ conduction mode and the other interval with $120^{\circ}$ conduction mode. In $120^{\circ}$ conduction mode operation, two output terminals are connected to DC supply and the third one remains open. The potential of this open terminal will depend on the load characteristics and is unpredictable except the case of pure resistive loads. To cope this problem, we propose the modified α conduction mode.

• Journal of Veterinary Clinics
• /
• v.19 no.3
• /
• pp.316-321
• /
• 2002

The purpose of this study was to examine the effect of Ga-As(Gallium-Arsenide, wave length; 904 nm) infrared laser irradiation on healing of the experimentally crush injured rat sciatic nerves. The bilateral sciatic nerves of 43 adult male Sprague-Dawley rats were compressed surgically with a straight hemostat (1 mm width). The right legs of all the rats were irradiated using a 27 mW Ga-As infrared laser (laser irradiated group). The radiation procedure was administered for 3 minutes every day for 1, 3, 5, and 7 weeks in each group. Left legs were not irradiated and served as the control group. The numbers of total myelinated axon and degenerated myelin in the sciatic nerves of bilateral legs were measured and analyzed with mage analysis system in order to make a morphological analysis of the effect of the Ga-As infrared laser on injured nerves. Total number of myelinated axons was increased with time interval, especially in the 1, 3. and 5 week of irradiated group. Conversely, the number of degenerated myelin was decreased with time interval, especially in the irradiated group. The effects in the irradiated group were more pronounced than those of the control group. In conclusion, the Ga-As infrared laser irradiation is a useful adjuvant therapy to the regeneration of the peripheral nerve injury.

• Annals of Clinical Neurophysiology
• /
• v.25 no.1
• /
• pp.32-37
• /
• 2023

Background: Type 2 diabetic mellitus (T2DM) is an emerging global pandemic which is associated with lots of co-morbidities and reported vascular dysfunctions. T2DM associated vascular dysfunctions leads to vasculopathy in the form of altered peripheral vascular dynamics. Cold stress test (CST) is a reliable sympathetic reactivity test used for assessing vascular dysfunctions. In this study we are trying to quantify vascular dysfunctions in T2DM patients non invasively by various parameters of photoplethysmography (PPG) of cold stress test. Methods: Case control study had done in referral health center AIIMS, Raipur. Parameters are recorded by finger-PPG before, during and after CST (1 min) in 2 groups, control (n = 20 healthy volunteers) and case (n = 20 diagnosed T2DM patients). Results: Due to cold stress, PPG parameter peak amplitude was significantly decreased in both healthy and T2DM groups (p <0.001 and p <0.001, respectively). However, recovery trend of amplitude was significantly slow in T2DM compared to healthy subjects. Another PPG parameter peak to peak interval was significantly higher in healthy group compared to T2DM patients. Conclusions: This study showed that T2DM patients has significant deranged pulse volume parameters like amplitude and peak to peak interval can be used to objectively quantify the vasculopathy in T2DM patients by using sympathetic reactivity to cold stress.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1896-1900
• /
• 2003

In this paper, a new type of output feedback control, called a receding horizon finite memory control (RHFMC), is proposed for stochastic discrete-time state space systems. Constraints such as linearity and finite memory structure with respect to an input and an output, and unbiasedness from the optimal state feedback control are required in advance. The proposed RHFMC is chosen to minimize an optimal criterion with these constraints. The RHFMC is obtained in an explicit closed form using the output and input information on the recent time interval. It is shown that the RHFMC consists of a receding horizon control and an FIR filter. The stability of the RHFMC is investigated for stochastic systems.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.7 no.1
• /
• pp.38-44
• /
• 2011

In this study, heating performance and energy consumption characteristics with control strategies for central heating system were researched by the simulation. The simulation analysis is made by TRNSYS ver. 15 with the actual data. The parametric study on proportional factor, control time interval and outdoor air temperatures changes were done to compare control characteristics and energy performance, respectively. As a result, the simulation results with various parameter changes show good heating performance and energy saving.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.11
• /
• pp.1131-1135
• /
• 2014

This paper proposes the enhanced faulty node detection scheme with hybrid algorithm using Markov-chain model on BCH (Bose-Chaudhuri-Hocquenghem) code in naval distributed control networked systems. The probabilistic model-driven approach, on Markov-chain model, in this paper uses the faulty weighting interval factors, which are based on the BCH code. In this scheme, the master node examines each slave-nodes continuously using three defined states : Good, Warning, Bad-state. These states change using the probabilistic calculation method. This method can improve the performance of detecting the faulty state node more efficiently. Simulation results show that the proposed method can improve the accuracy in faulty node detection scheme for real-time naval distributed control networked systems.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.229-232
• /
• 2000

This research aims at developing a low-cost PC-NC system based on one-CPU and investigating the feasibility of its application to a simple-function lathe. Its hardware consists a two axes motion control board including a 24bit counter, 8253 timer, a 12bit DA converter, DIO board for PLC operation and a PC with Intel Pentium 466MHz. The fundamental real-time MC functions such as G-code interpretation, interpolation, position and velocity control of axes are performed. User programming interface with functions of icon manipulation, tool-path simulation and NC-code generation was implemented. In order to achieve real-time control and safety, axis control, NC interpretation, interpolation and user communication are completely executed during every interrupt interval of I msec.