• 제목/요약/키워드: Control variables

검색결과 4,833건 처리시간 0.037초

자폐성 장애 아동의 시공간 및 압력분포 변인을 통한 장애물보행 분석 (Analysis of Obstacle Gait Using Spatio-Temporal and Foot Pressure Variables in Children with Autism)

  • 김미영;최범권;임비오
    • 한국운동역학회지
    • /
    • 제21권4호
    • /
    • pp.459-466
    • /
    • 2011
  • The purpose of this study was to analyze of obstacle gait using spatio-temporal and foot pressure variables in children with autism. Fifteen children with autism and fifteen age-matched controls participated in the study. Spatio-temporal and foot pressure variables was investigated using GAITRite pressure sensor system. Each footprint was divided into 12 equal trapezoids and after that the hindfoot, midfoot and forefoot analysis was developed. Independent t-test was applied to compare the gait variables between the groups. The results showed that the autism group were significantly decreased in velocity, cadence, cycle and swing time compared to the control group. The autism group were significantly increased in step width and toe out angle compared to the control group. The autism group were significantly increased at midfoot and forefoot of lateral part of footprint and forefoot of medial part of footprint in the peak time compared to the control group. The autism group were significantly increased at midfoot and hindfoot in $P^*t$, at midfoot in active area, and at hindfoot in peak pressure compared to the control group. In conclusion, the children with autism showed abnormal obstacle gait characteristics due to muscle hypotonia, muscle rigidity, akinesia, bradykinesia and postural control impairments.

자기상관이 있는 장치산업에서 공정 진단 및 부적합품률 제어모형에 관한 연구 (A Study on a Control Model for the Diagnostic and Nonconformity Rate in an Instrumental Process Involving Autocorrelation)

  • 구자활;조진형
    • 산업경영시스템학회지
    • /
    • 제33권1호
    • /
    • pp.33-40
    • /
    • 2010
  • Because sampling interval for data collection tends to be short compared with the overall processing time, in chemical process, instrumental process related tanks or furnace collected data have a significant autocorrelation. Insufficient control technique and frequent control actions cause unstable condition of the process. Traditional control charts which were developed based on iid (independently and identically distributed) among data cannot be applied on the existence of autocorrelation. Also unstable process is difficult to identity or diagnose. Because large-scale process has a lot of measurable variables and multi-step-structures among data, it is difficult to find relation between measurable variables and nonconformity. In this paper, we suggested an appicable model to diagnose the process and to find relation between measurable variables (CTQ) and nonconformity in the process having autocorrelation, unstable condition frequently, a lot of measurable variables, and multi-step-structure. And we applied this model to real process, to verify that the process engineers could easily and effectively diagnose the process and control the nonconformity.

Consumer Behavior and Purchasing Intention Toward Country of Origin Labeling Products: An Empirical Study in Vietnam

  • HIEN, Luc Manh;TRAM, Nguyen Thi Anh;HA, Le Thi Hai;VAN, Pham Thi Thuy
    • The Journal of Asian Finance, Economics and Business
    • /
    • 제8권8호
    • /
    • pp.565-572
    • /
    • 2021
  • The role of the garment and textile industry is particularly important in the economies of many countries in the context of international goods trade. There is no denying that the garment and textile industry contributes significantly to the economic growth in the global economy. The study seeks to investigate the relationship between control variables and Vietnamese consumers' intention to buy Chinese garment products. While previous research has found some control variables influencing consumers' intention to buy products, little research has been done about the influence of control variables on consumers' intention to buy Chinese garment products, in developing countries like Vietnam. In particular, the textile industry plays an important role in export, but outsourcing is accounting for a high proportion of trade, hence, it is necessary to increase innovation to increase consumers' intention to buy domestic garment products. The data is collected from a survey of 406 Vietnamese consumers' in Hanoi city and Ho Chi Minh City. The methodology includes a mixed-method, i.e. qualitative method and quantitative method. The quantitative method applies SPSS analysis to measure the control variables' influence on Vietnamese consumers' intention to buy Chinese garment products. The results identify 1 control variable that impacts Vietnamese consumers' intention to buy Chinese garment products, which is domicile.

비선형 퍼지 PD 제어기를 이용한 X-Y 테이블의 경로제어 (Contour Control of X-Y Tables Using Nonlinear Fuzzy PD Controller)

  • 채창현;석홍성;김희년
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 G
    • /
    • pp.2849-2852
    • /
    • 1999
  • This paper describes the fuzzy PD controller using simplified indirect inference method. First, the fuzzy PD controller is derived from the conventional continuous time linear PD controller. Then the fuzzification, control-rule base, and defuzzification using SIIM in the design of the fuzzy controller are discussed in detail. The resulting controller is a discrete time fuzzy version of the conventional PD controller. which has the same linear structure. but are nonlinear functions of the input signals. The proposed controller enhances the self-tuning control capability. particularly when the process to be controlled is nonlinear. As the SIIM is applied, the fuzzy Inference results can be calculated with splitting fuzzy variables into each action component and are determined as the functional form of corresponding variables. So the Proposed method has the capability of the high speed inference and extending the fuzzy input variables easily. Computer simulation results have demonstrated the superior to the control Performance of the one Proposed by D. Misir et at. Final)y. we simulated the contour control of the X-Y tables with direct control strategies using the proposed fuzzy PD controller.

  • PDF

건강통제위 개념의 국내 간호연구 분석 (Health Locus of control : A Review of the Nursing Research in Korea)

  • 이은희;임숙빈;김인자;이은옥
    • 대한간호학회지
    • /
    • 제23권4호
    • /
    • pp.694-712
    • /
    • 1993
  • A number of nursing researchers have used the concept of health locus of control over the past decade in Korea. This article reviewed 92 nursing research papers on health locus of control conducted since 1982, and examined type of subjects, design, measurement instruments, the scores of each dimension of the HLOC, and significant variables. Most of the research were correlational in design, used an 18-item 6-point score instrument and studied the relationship between HLOC, health re-lated variables, and cognitive-emotional variables, The health related variables included health behavior, health management, preventive health behavior, compliance to treatment regimen and self care behavior The cognitive-emotional variables included depression, anxiety, stress and self- esteem. Some consistent findings are beginning to emerge. The concept of internal HLOC was positively correlated with the health related variables. But few studies found any significant correlation between powerful others HLOC and health related variables. In the case of chance HLOC, few studies reported a significant relationship. Many of the articles reported significant relationships between internal HLOC and cognitive-emotional variables, but few reported a significant relationship between powerful others or chance HLOC and cognitive -emotional variables. all experimental studies but one found that only internal HLOC was significantly changed following experimental manipulation. When the different groups of subjects such as normal persons, chronic patients, acute patients were compared in terms of mean scores, it was found that the HLOC appeared to change depending on the status of the patients. Recommendations for future research include modification of the instrument to increase the reliability and validity, study about the pattern of response suggested by Wallston and Wallston(1982) and further experimental study on changing the belief of subjects to internal HLOC.

  • PDF

발란싱축소화로 구한 축소모델로부터 원 시스템 상태변수를 구하는 방법 (Approximation of the State Variables of the Original System from the Balanced Reduced Model)

  • 정광영
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2000년도 제15차 학술회의논문집
    • /
    • pp.333-333
    • /
    • 2000
  • When the generalized singular perturbation method is used for model reduction, the state variables of the original system is reconstructed from the reduced order model. The state reduction error is defined, which shows how well the reconstructed state variables approximate the state variables of the original system equation.

  • PDF

승차감 향상을 위한 액티브서스펜션의 제어알고리즘 (Control Algorithms of Active Suspension Systems for Ride Comfort Improvement)

  • 탁태오
    • 산업기술연구
    • /
    • 제12권
    • /
    • pp.61-67
    • /
    • 1992
  • Two control algorithms of active suspension system for improving ride quality are described and their effectiveness is assessed using a quarter car model. Optimal control approach demonstrates great flexibility to meet various running conditions of a vehicle. However, in order to fully utilize the power of optimal control apporach, accurate estimation of the state variables is essential. Simple, yet effective sky-hook algorithm seems to be well suited for real application because of its much relaxed requirements on sensing the stste variables and relative easiness to implment.

  • PDF

발목 관절 근육의 유도된 피로가 외발서기 자세제어 능력과 회복에 미치는 영향 (Effects of Induced Fatigue of Ankle Joint Muscle on the Capability and Recovery of Postural Control during Single-Leg Stance)

  • 염창홍;김태현
    • 한국운동역학회지
    • /
    • 제22권2호
    • /
    • pp.219-228
    • /
    • 2012
  • The purpose of this study was to investigate how induced fatigue of the ankle joint muscles affects the capability and recovery of postural control during single-leg stance in healthy adults. The study population included 22 randomly recruited men and women. Postural control was performed on single-leg stance with eyes open. Ankle joint muscle was fatigued by repeated heel raises. According to the results of this study, for the anteroposterior variables, both men and women showed significantly increased center of mass velocity and decreased center of pressure 95% edge frequency immediately after fatigue. For the mediolateral variables, both men and women showed significantly increased center of mass velocity and decreased center of pressure 95% edge frequency immediately after fatigue. For the total variables, both men and women showed significantly increased center of mass averaged-velocity immediately after fatigue, and also, the center of pressure 95% confidence ellipse area significantly increased in women. Postural control variables were not significantly different for men and women at any time (Pre, P0, P10, and P20). In conclusion, the gender does not affect the capability and recovery after induced fatigue of ankle joint muscles. The effect of fatigue found for the anteroposterior and the mediolateral variables in both men and women. Furthermore ankle joint muscle fatigue led to change of postural control strategy from an ankle joint strategy towards a hip joint strategy. These changes are believed to damage postural control. The ankle joint muscle recovered from fatigue within 20 min during single-leg stance.

청소년기의 자의식 및 체중조절행동자 의복행동과의 관련연구 (Korean Adolescents' Clothing Behavior as Related to Self-Consciousness and Weight Control Practices)

  • 심정은;고애란
    • 한국의류학회지
    • /
    • 제21권8호
    • /
    • pp.1334-1345
    • /
    • 1997
  • The purpose of this study were 1) to identify the effects of age and sex of Korean adolescents on the psychological variables(body attitudes, public/private self-consciousness, self-esteem), weight control practices, and clothing behaviors, and 2) to identify the relation- ships between psychological variables and weight control practices, and the effects of the variables on clothing behaviors in the adolescent' groups classified by sex and age. The results of this study were as follows: 1) Two factors of body attitudes were identified: Body-shape consciousness and Physical attractiveness. Four factors of clothing attitudes were identified: Clothing interest/dressing for others, Clothing exhibition, Dressing for self, and Psychological clothing-dependerlce. 2) There were significant effects of sex on all of the research variables. Age was found to have effects on Physical attractiveness, self-esteem, public/private self-consciousness, Clothing exhibition, and Psychological clothing- dependence. 3) In the relationships between psychological variables and weight control practices, Body-shape consciousness was negatively correlated with Physical attractiveness in all groups. Also, Body-shape consciousness had effects on weight control practice in all subject groups. 4) Public self-consciousness had direct/indirect effects on the Clothing interest/dressing for others in all subject groups. Private self-consciousness had direct/ indirect effects on dressing for self in high school boys and girls. Body-shape consciousness had indirect effects on Preference for up-to date style in male college students group, whereas weight control practices had effects on the Preference for up-to date style in female college students group. Self-esteem was found to have the effects on clothing behavior in college students groups. Among clothing attitude factors, Clothing exhibition had distinct effects on the Preference for up-to date style in all subject groups, and Clothing interest/dressing for others had effects on Clothing exhibition and Psychological clothing-dependence in high school boys and girs.

  • PDF

연속형 퍼지 입력변수를 사용하는 퍼지 제어기의 환산계수 동조 (Scale Factor Tuning of the Fuzzy Controller Using Continuous Fuzzy Input Variables)

  • 임영철;박종건;위석오;정현철
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1996년도 하계학술대회 논문집 B
    • /
    • pp.1359-1361
    • /
    • 1996
  • This paper describes a design of real time fuzzy controller using Minimum fuzzy control Rule Selection Method(MRSM). The control algorithm of dynamic systems needs less computation time and memory. To reduce the computation time of fuzzy logic controller, minimum number of rules are to be selected for the fuzzy input variable. The universe of discourse is divided by the number of linguistic labels to allocate the assigned membership function to the fuzzy input variables. In this case, since fuzzy input variables are continuous, scale factor SU is tuned independently. According to increment of SU control surface is improved to adapt the change of system parameter. At this, crisp control surface is increased. With the increament of crisp control surface, fuzzy control surface is reduced. When error state deviates from desirable error state, crisp control surface is more useful than fuzzy control surface for obtaining fast rising time.

  • PDF