• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1067-1072
• /
• 2014

As the service continuity of mobile multimedia service is affected by packet loss and delay, the efficient handover control is essentially required. This paper proposes a handover admission control scheme to satisfy service continuity of mobile multimedia services in LTE-Advanced System. In this method, based on context information of mobile terminal and base station changes, the sequence diagrams between the function modules for controlling new sessions and ISHO sessions are proposed. Simulation is done for performance analysis with the measure of transmission delay and packet loss rate.

• Journal of Advanced Navigation Technology
• /
• v.14 no.1
• /
• pp.49-56
• /
• 2010

Severe energy constraints and the low power consumption require the significance of the energy efficient error control mechanisms in wireless sensor network (WSN). In this paper, an automatic repeat request (ARQ) methodology for the analysis of error control schemes in WSN is presented such that the effects of packet length, the modulation scheme and the interference effect of the wireless channel are investigated. Moreover, an analyis of ARQ error control is provided by considering two major architectures for wireless sensor network, i.e., Mica2 and MicaZ sensor nodes. And the throughput performance of WSN with asynchronous FSK signal and DSSS-OQPSK signal with selective repeat ARQ scheme are analyzed in multiple interference environment, and the probability of receiving a correct bit and packet from target node to sink node is evaluated as a function of the channel parameter, the number of wireless sensor node, and the spreading factor.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.684-690
• /
• 2003

In this paper, a contention-based reservation access control algorithm and a slot allocation algorithm are proposed for non-real-time bursty traffic services in the wireless ATM networks. In order to reduce the collisions of the reservation request packets, the base station scheduler calculates the transmission probability using the number of RAS minislots and the estimated load of the reservation request packets. And it broadcasts the calculated transmission probability over the downlink control channel. Mobile terminals, which have traffic burst, select randomly a RAS minislot and transmit the reservation request packet by the received transmission probability. The reservation request packet contains the number of packets in the buffer. The slot allocation is based on the buffer status of the received reservation request packets. The base station scheduler allocates slots in proportion to the total number of slots that are requested by each terminal.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.787-793
• /
• 2015

In order to support reliable medium access control (MAC) layer multicast services in Broadband Wireless Access (BWA) networks, we here propose spreading codes (Cumulative ACK (CA) code and ARQ Feedback Request (AFR) code) based reliable multicast feedback scheme. The status indications based on the automatic repeat request (ARQ) mechanism are needed in some multicast services. In accordance with various wireless channel environments, we demonstrate the performance excellency of our proposed scheme with respect to required uplink resources compared with the original feedback scheme based on unicast ARQ feedback messages. In addition, we analyze packet error rate (PER) against the various wireless channel environments.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.187-195
• /
• 2013

In this paper, we propose a transmission power control scheme for performance improvement of VANET using STPC algorithm considering traffic-flow model. In traffic congestion, a transmission power between car and car increases the collision probability of control messages, which causes the problems to decrease the performance of VANET. The proposed scheme is evaluated by OPNet modeler 16.0 for analyzing its performance and effectiveness in terms of end-to-end delays in hops, packet success probability, and throughput. The simulation result show that the proposed scheme reduces a delay in hops and increases high packet transmission success ratio. Furthermore, a throughput under high density traffic is improved effectively.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.143-146
• /
• 2004

Differentiated services (DiffServ) has been widely accepted as the service model to adopt for providing quality-of­service (QoS) over the next-generation IP networks. There is a growing need to support QoS in mobile ad hoc networks. Supporting DiffServ in mobile ad hoc networks, however, is very difficult because of the dynamic nature of mobile ad hoc networks, which causes network congestion. The network congestion induces long transfer packet delay and low throughput which make it very difficult to support QoS in mobile ad hoc networks. We propose DiffServ module to support differentiated service in mobile ad hoc networks through congestion control. Our DiffServ module uses the periodical rate control for real time traffic and also uses the best effort bandwidth concession when network congestion occurs. Network congestion is detected by measuring the packet transfer delay or bandwidth threshold of real time traffic. We evaluate our mechanism via a simulation study. Simulation results show our mechanism may offer a low and stable delay and a stable throughput for real time traffic in mobile ad hoc networks.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.10
• /
• pp.4977-4996
• /
• 2016

The existence of excessively large and too filled network buffers, known as bufferbloat, has recently gained attention as a major performance problem for delay-sensitive applications. Researchers have made three types of suggestions to solve the bufferbloat problem. One is End to End (E2E) congestion control, second is deployment of Active Queue Management (AQM) techniques and third is the combination of above two. However, these solutions either seem impractical or could not obtain good bandwidth utilization. In this paper, we propose a Transmission Control Protocol（TCP）delayed window update mechanism which uses a congestion detection approach to predict the congestion level of networks. When detecting the network congestion is coming, a delayed window update control strategy is adopted to maintain good protocol performance. If the network is non-congested, the mechanism stops work and congestion window is updated based on the original protocol. The simulation experiments are conducted on both high bandwidth and long delay scenario and low bandwidth and short delay scenario. Experiment results show that TCP delayed window update mechanism can effectively improve the performance of the original protocol, decreasing packet losses and queuing delay while guaranteeing transmission efficiency of the whole network. In addition, it can perform good fairness and TCP friendliness.

• International Journal of Computer Science & Network Security
• /
• v.23 no.4
• /
• pp.123-133
• /
• 2023

Active queue management (AQM) is a leading congestion control system, which can keep smaller queuing delay, less packet loss with better network utilization and throughput by intentionally dropping the packets at the intermediate hubs in TCP/IP (transmission control protocol/Internet protocol) networks. To accelerate the responsiveness of AQM framework, proportional-integral-differential (PID) controllers are utilized. In spite of its simplicity, it can effectively take care of a range of complex problems; however it is a lot complicated to track down optimal PID parameters with conventional procedures. A few new strategies have been grown as of late to adjust the PID controller parameters. Therefore, in this paper, we have developed a Squirrel search based PID controller to dynamically find its controller gain parameters for AQM. The controller gain parameters are decided based on minimizing the integrated-absolute error (IAE) in order to ensure less packet loss, high link utilization and a stable queue length in favor of TCP networks.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.3
• /
• pp.323-328
• /
• 2009

In this paper, a decentralized fuzzy output feedback controller for the nonlinear networked control system is proposed for wireless sensor network. Especially, it is assumed that the networked control system has the output packet loss and the input transmission failure. For the fuzzy control of the nonlinear subsystem, it presents Takagi-Sugeno (T-S) fuzzy model of each subsystem and it designs the decentralized fuzzy output feedback controller. The stability condition of the closed-loop system with the proposed controller is obtained by Lyapunov functional. The obtained stability condition is represented to the linear matrix inequality (LMI) form, and the control gain is obtained by LMI. An example is given to show the verification discussed throughout the paper.

• Journal of Korea Multimedia Society
• /
• v.7 no.5
• /
• pp.698-712
• /
• 2004

DiffServ network architecture does not define a call admission control procedure explicitly. In this paper, a new DiffServ QoS control mechanism is suggested which, after the call admission control, can execute packet process according to the class while, at the same time, executing on the flow based call admission control in the DiffServ network. Routers on the path from the source to the destination estimate the aggregated class traffic of the existing flows and the new incoming flow and then, perform a call admission control in accordance with the type of classes efficiently based on the required bandwidth per each class that can meet the user's QoS requirements. In order to facilitate the packet process according to the class after the flow based call admission control, a mechanism is suggested that can adjust the network resources to classes dynamically. The performance analysis on this mechanism is carried out through a simulation.