• 한국전산유체공학회지
• /
• 제5권1호
• /
• pp.14-21
• /
• 2000

A method of two and three dimensional orthogonal grid generation with control of spacing by using the covariant Laplace equation is presented. An important feature of the methodology is its ability to control effectively the grid spacing especially near the boundaries still maintaining good orthogonality in whole field. The method is based on the concept of decomposition of the global transformation into consecutive transformation of an approximate conformal mapping and an auxiliary orthogonal mapping to have linear and uncoupled equations. Control of cell spacing is based on the concept of reference arc length, and orthogonal correction is peformed in the auxiliary domain. It is concluded that the methodology can successfully generate well controlled orthogonal grids around bodies of 2 and 3 dimensional configurations.

• 생물환경조절학회지
• /
• 제22권3호
• /
• pp.256-261
• /
• 2013

본 실험은 토마토 플러그묘 생산에서 공간처리와 배지부피처리를 함께하여 두 가지 처리가 유묘의 묘소질 및 수확량에 미치는 영향을 구명하고자 수행하였다. 처리는 공간과 배지의 부피별로 각 2처리, 모두 4가지 처리를 두었다. 배지는 동일하되 배지의 부피에 따라 40공과 50공 플러그 육묘판을 사용했고, 각 육묘판에 공간처리를 한것과 하지 않은 것으로 나누어 처리했다(40S-OK, 40S-NO, 50S-OK, 50S-NO). 전 실험기간 중에 처리외의 환경조건과 급액조건은 모두 동일하게 적용하였다. 광합성 속도와 묘소질 분석 및 수확량과 수확속도 모두에서 통계적 유의성이 있게 공간처리와 배지의 부피처리의 영향을 받았다. 광합성 속도와 묘소질에서는 40S-OK, 50S-OK, 40S-NO, 50S-NO 처리 순으로 좋은 결과를 나타내어 공간처리의 효과가 더 크고, 수확량에서는 40S-OK, 40S-NO, 50S-OK, 50S-NO 처리 순으로 많아서 배지의 부피 처리의 영향이 큰 것으로 판단된다. 따라서 고품질 묘 생산과 초기 수확량을 증대하고, 수확속도를 빠르게 하기 위해서는 육묘기에 적절한 공간확보와 배지의 부피를 크게 하는 것이 효과적인 것으로 사료된다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2000년도 춘계 학술대회논문집
• /
• pp.99-106
• /
• 2000

A method of two and three dimensional orthogonal grid generation with control of spacing by using the covariant Laplace equation is Presented. An important feature of the methodology is its ability to control effectively the grid spacing especially near the boundaries still maintaining good orthogonality in whole field. The method is based on the concept of decomposition of the global transformation into consecutive transformation of an approximate conformal mapping and au auxiliary orthogonal mapping to have linear and uncoupled equations. Control of cell spacing is based on the concept of reference arc length, and orthogonal correction is performed in the auxiliary domain. It is concluded that the methodology can successfully generate well controlled orthogonal grids around bodies of 2 and 3 dimensional configurations.

• 한국컴퓨터정보학회논문지
• /
• 제9권3호
• /
• pp.195-200
• /
• 2004

셀 지연 변이(CDV)에 의한 트래픽 문제를 해결하기 위하여 본 논문에서는 RDT에서의 지연 누적을 보완하면서 RDT의 장점을 활용하기 위하여 RAT방식에서의 셀 도착 시간을 기준으로 하며, 간격 제어기에 따로 데이터 버퍼를 두지 않고 시스템 내의 데이터 버퍼를 사용하여 셀들을 저장하고 저장된 셀들을 이론적 셀 간격시간으로 재방출하는 방식을 제안하였다. 제안한 방식의 성능을 비교하기 위하여 셀 간격 뿐만 아니라 간격제어기에서의 셀 평균 지연특성과 UPC/NPC에서 협상된 트래픽 파라미터의 준수 정도를 나타내기 위해 CDV허용치를 적용하고 분석하였으며, 출력 트래픽의 연속 셀 분산 형태를 분석하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 학술대회 논문집 전문대학교육위원
• /
• pp.9-12
• /
• 2000

A new type electrolyzing cell with slits on parallel plate electrodes and wire-to-cylinder type electrode system has been proposed instead of the conventional parallel plate type. An investigation was carried out on the effect of the number and size of slits on ion precipitation and oxidant generation characteristics, evidenced by eliminated space charge limiting action and by elevated electric fields in active interelectrode spacing. And it is also studied on the effect of the diameter of wire electrode to ion precipitation and oxidant generation characteristics. With electrode with 48 slits, very oxidants generation water of 3.1 [ppmm] and 19.0 [ppmm] in positive electrode side were obtained with tap water and 0.1 [wt%] NaCl dissolved tap waterfed. In addition, with wire-to-cylinder type electrode system, it is found that oxidant contained water of 0.48 [ppmm] and 5.46 [ppmm] in positive electrode side were obtained with tap water and 0.1 [wt%] NaCl dissolved tap water fed for the case of discharge electrode diameter of 0.5 [$mm{\phi}$]. Consequently, very high ion precipitation and dense oxidant generation characteristics can be realized by having slits on the electrodes of conventional cell as these slits increase the electric fields and decrease the space charge limiting actions in interelectrode spacing.

• 한국컴퓨터정보학회논문지
• /
• 제6권1호
• /
• pp.45-50
• /
• 2001

ATM 망에서는 고속의 셀 전송 특성으로 인해 폭주가 발생할 수 있으며. 예측할 수 없는 트래픽의 변화로 인한 셀 지연과 셀 손실이 발생할 수 있다. 따라서 트래픽 제어는ATM 망에서 필수적이며, 폭주현상을 줄이기 위한 여러 가지 방법들 가운데 하나가 셀 간격 제어이다. 본 논문에서는 리키버켓과 EWMA로 구성된 혼합형 셀 간격 제어 기법을 연구한다. 혼합형 셀 간격 제어기는 시간 윈도우를 가진 EWMA와 토큰 풀을 가진 리키버켓 간격제어 버퍼로 구성된다. BONeS 시뮬레이터에서 ON/OFF 트래픽 소스 모델을 이용하여 제안한 혼합형 셀 간격 제어 기법의 성능을 평가한 결과 패킷화된 음성 트래픽과 고속 트래픽 소스 모두 셀 간격이 평균 비트율에 수렴하여 제어되는 것을 관찰할 수 있었다.

• 한국컴퓨터정보학회논문지
• /
• 제7권3호
• /
• pp.143-148
• /
• 2002

ATM망에서는 예측할 수 없는 트래픽의 변화로 셀 지연과 셀 손실이 발생할 수 있으며 고속의 셀 전송 특성으로 인해 폭주가 발생할 수 있다. 따라서 트래픽 제어는 ATM 망에서 필수적이며, 폭주현상을 줄이기 위한 여러 가지 방법들 가운데 하나가 셀 쉐이핑이다. 본 논문에서는 리키버켓과 TJW로 구성된 셀 쉐이핑 기법을 연구한다. 셀 쉐이퍼는 시간 윈도우를 가진 TJW와 토큰 풀을 가진 리키버켓, 간격제어 버퍼로 구성된다. BONeS시뮬레이터에서 ON/OFF트래픽 소스 모델을 이용하여 제안한 셀 쉐이핑 기법의 성능을 평가한 결과, 패킷화된 음성 트래픽과 고속 트래픽 소스 모두 셀 간격이 평균 비트율에 수렴하여 제어되는 것을 관찰할 수 있었다.

• Journal of information and communication convergence engineering
• /
• 제14권4호
• /
• pp.207-214
• /
• 2016

In this paper, we propose a radial reference map-based location fingerprinting technique with constant spacing from an access point (AP) to all reference points by considering the minimum dynamic range of the received signal strength indicator (RSSI) obtained through an experiment conducted in an indoor environment. Because the minimum dynamic range, 12 dBm, of the RSSI appeared every 20 cm during the training stage, a cell spacing of 80 cm was applied. Furthermore, by considering the minimum dynamic range of an RSSI in the location estimation stage, when an RSSI exceeding the cumulative average by ${\pm}6dBm$ was received, a previously estimated location was provided. We also compared the location estimation accuracy of the proposed method with that of a conventional fingerprinting technique that uses a grid reference map, and found that the average location estimation accuracy of the conventional method was 21.8%, whereas that of the proposed technique was 90.9%.

• 한국축산식품학회지
• /
• 제43권4호
• /
• pp.712-720
• /
• 2023

Osteoporosis is a growing global health concern primarily associated with decreased estrogen in postmenopausal women. Recently, some strains of probiotics were examined for potential anti-osteoporotic effects. This study intended to evaluate the impacts of Lactiplantibacillus plantarum MGE 3038 strain (MGE 3038) in ovariectomized rats. For this purpose, twelve weeks old female Wistar rats (n=21; 250-300 g) were divided into 3 groups; ovariectomy (OVX) group, OVX/MGE 3038 group and Sham group (control). In these groups; two went through respective OVX and one had daily MGE 3038 administration through oral gavage. Prior to 16 weeks after OVX, we collected blood samples and extracted the tibiae. We scanned the extracted tibiae by in-vivo micro-computed tomography (micro-CT) and evaluated pathology by hematoxylin and eosin (H&E) and Masson's trichrome staining. The serum levels of C-telopeptide of type I collagen (CTX), osteocalcin (OC), and the receptor activator of nuclear factor-κB ligand (RANKL) were examined. The OVX/MGE 3038 group showed increases in bone mineral density, trabecular bone volume, trabecular number, and trabecular thickness (Tb.Th), and a decrease in trabecular spacing than the OVX group. However, OVX/MGE 3038 group and control group were measurably comparable in Tb.Th. Micro-CT, H&E, and Masson's trichrome findings exhibited increased preservation and maintenance of trabecular bone structure in the OVX/MGE 3038 group in comparison to the OVX group. In serum, the levels of CTX, OC and RANKL were significantly different between the OVX and OVX/MGE 3038 groups. Taken together, L. plantarum MGE 3038 could be helpful for the treatment of osteoporosis.

• ETRI Journal
• /
• 제38권5호
• /
• pp.903-910
• /
• 2016

We propose a novel multi-stack (MS) technique for a compact and wideband electromagnetic bandgap (EBG) structure in high-speed multilayer printed circuit boards. The proposed MS technique efficiently converts planar EBG arrays into a vertical structure, thus substantially miniaturizing the EBG area and reducing the distance between the noise source and the victim. A dispersion method is presented to examine the effects of the MS technique on the stopband characteristics. Enhanced features of the proposed MS-EBG structure were experimentally verified using test vehicles. It was experimentally demonstrated that the proposed MS-EBG structure efficiently suppresses the power/ground noise over a wideband frequency range with a shorter port-to-port spacing than the unit-cell length, thus overcoming a limitation of previous EBG structures.