• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.741-743
• /
• 2004

In this paper, we describe a Control Element Drive Mechanism(CEDM) operation test using a Power Controller. By testing, we can catch the mechanical and electrical characteristics of CEDM and obtain the information about the improvement of CEDM and the design of CEDM power cabinet. The power controller for CEDM introduced in this paper can input firing angles directly into gate drive circuits of thyristors so that this method can be used to derive the maximum and minimum values of firing angles within available limits for a 3-phase half-wave rectifier. Angle inputs help us understand each coil's response characteristics. Since this power controller generates a serial sequence for CEDM insertion and withdrawal operations, we may judge whether CEDM works correctly as expected or not in each phase of a step movement.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.559-561
• /
• 2004

In this paper, we design two types of Main Control Unit for Control Rod Control System and Control Element Drive Mechanism Control System, respectively, using a domestic Distributed Control System(DCS) developed to localize the instrumentation and control(I&C) system for nuclear power plant(NPP). There are many parts developed by domestic skills and being operated successfully in NPP, but the development of I&C system as an essential part has been slow in progress. We will show the great possibility of developing peculiar Korean I&C system by applying this domestic DCS to nuclear I&C system and confirming its successful operation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.468-473
• /
• 2004

The magnetic jack type Control Element Drive Mechanism (CEDM) had been developed and verified through electromechanical testing including the testing of the magnetic force required to lift the control element assembly. It would become inefficient in view of cost and time for parametric studies to be performed by test to improve the CEDM system. So it becomes necessary to develop a computational model to simulate the electromagnetic characteristics of the CEDM in order to improve the CEDM design efficiently. In this paper it is presented that the electromagnetic analysis using a 2D axisymmetric FEM model has been carried out to simulate the operation of the latch magnet of the CEDM to generate a current trace for latch coil. The results show the calculated current trace is very similar to the real current trace taken from the CEDM.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제3권3호
• /
• pp.225-232
• /
• 2015

제어봉구동장치는 원자로의 반응도를 제어하기 위한 전기기기이다. 기존 제어봉구동장치는 원자로 외장형으로 원자로덮개의 노즐에 설치되었다. 그러나 최근에는 제어봉인출 사고를 근본적으로 배제하기 위한 내장형 제어봉구동장치의 필요성이 대두되어 왔다. 본 논문에서는 기존의 자석잭 방식 외장형 제어봉구동장치를 응용하여 원자로 내장형 제어봉구동장치를 개발하는 개념설계를 소개한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.576-578
• /
• 2005

This paper deals with the design of power topology for nuclear power plants. Although rod control system is still classified into non-safety class. much attention on its reliability issue has been given so far because of its importance for the stable operation of the reactor in the plant. In terms of technical aspects, proposed design is reviewed to satisfy system requirements. This paper deals with a design of power topology for driving Control Element Drive Mechanism (CEDM) that is used to withdraw or insert control rods in nuclear reactor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.714-716
• /
• 2000

In the System-integrated modular advanced reactor(SMART), the motor for Control element drive mechanism(CEDM) requires high density power and simple drive mechanism to reduce volume because of restriction by install-space and must satisfy the reactor operating circumstances with high pressure and temperature. In this paper, we perform the basic design of the two kinds (Variable reluctance type and Hibrid-reluctance type) of the transverse flux motor to develop the prototype motor for the control element drive mechanism of SMART. Analyzed these motors by the FEM in the 2-dimension, we show the characteristics for each of the analysis model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.761-765
• /
• 1995

원자력발전소의 제어봉구동장치는 원자로의 압력경계 안에 설치되고 밀봉되므로 센서의 설치가 곤란하여 기존의 제어기는 개루프 형태의 제어기를 사용하고 있다. 본 논문에서는 기존 타이밍모듈의 문제점을 해결하기 위하여 제어봉구동장치 내부에 센서를 설치하지 않고도 제어봉구동장치의 작동 상황을 감시할 수 있는 방법을 개발하였다. 이 방법을 이용하여 제어봉 낙하방지, 정밀한 위치제어, 코일 수명연장의 특성이 있는 제어봉구동장치 타이밍 제어기를 폐루프 제어계통으로 설계하였다. 폐루프 제어개념에 의하여 개발된 알고리즘은 기존의 문제를 대부분 해결하였으며 계통의 성능 및 신뢰도가 향상되었다. 알고리즘 개발 및 시험 시, 여기서 설계한 실시간 제어봉구동장치 시뮬레이터를 사용하였고 현장에서 취득한 실제의 데이터와 함께 이 시뮬레이터를 이용하여 개발한 모든 알고리즘의 검증시험을 하였다. 검증결과 이 타이밍 제어기는 본래의 기능을 잘 수행하는 것으로 나타났다.

• Nuclear Engineering and Technology
• /
• 제31권1호
• /
• pp.1-8
• /
• 1999

In this paper, we propose a new type of power control system for the rod drive coil of the CEDM of the PWR NPP in order to supply more reliable DC power The electrical modelling of the controlled rod drive coil was done by referring related documentations. The design of the proposed system is based on this electric81 model satisfying the existing specification. A high power DC-DC converter scheme is adopted utilizing the SMPS technique in the design of the proposed system. In order to show the effectiveness of the proposed system, an experimental system with the capability of 3.2 K Watt was set up for a rod with four cores and some computer simulations and experimentations were carried out. The result shows a very similar tracking performance with that of the existing system to the driving command. As a result of this, the proposed method can be applied to the power control system for the rod drive coil of the CEDM of the PWR NPP.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.609-611
• /
• 1996

Zero-Cross Detector makes pilot signal to control the power to CEDM(Control Element Drive Mechanism). Existing Zero-Cross Detectors has had a problem which can cause unexpected reactor trip resulted from fluctuating frequency of input signal coming from M/G Set. The existing Zero-Cross Detector can't work properly when power frequency is varying because it was designed to work under stable M/G Set operation, and produces wrong pilot signal and output voltage. In this report the Zero-Cross Detector is improved to resolve voltage fluctuating problem by using new devices such as digital noise filtering circuit, variable cycle compensator and alarm circuit. And through the performance verification it shows that new circuit is better than old one. If suggested detector is applied to plant, it is possible to use it under House Load Operation because stable voltage can be generated by new Zero-Cross Detector.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권4호
• /
• pp.147-147
• /
• 2003

This paper describes the finite element analysis(FEA) for the design of electromagnet for Control Element Drive Mechanism(CEDM) in System-integrated Modular Advanced Reactor(SMART) and compared with the lifting power characteristics of prototype electromagnet. A thermal analysis was performed for the electromagnet. A model for the thermal analysis of the electromagnet was developed and theoretical bases for the model were established. It is important that the temperature of the electromagnet windings be maintained within the allowable limit of the insulation. since the electromagnet of CEDM is always supplied with current during the reactor operation. So the thermal analysis of the winding insulation which is composed of polyimide and air were performed by finite element method. As a result, it is shown that the characteristics of prototype electromagnet have a good agreement with the results of FEA. The thermal properties obtained here will be used as input for the optimization analysis of the electromagnet.