• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.4
• /
• pp.299-309
• /
• 2019

Waterworks facilities inevitably experience some amount of leakage even if there is a lot of investment or state-of-the-art technology that is applied such as DMA(District Metered Area) system construction, leakage detection, repair, pipe rehabilitation, etc. The primary reason is the leakage is naturally restored over time. In the UK, this restoration characteristic is defined as NRR(Natural rate of rise of leakage) and used to decision making for prioritizing active leakage control of DMAs. However, this restoration characteristic is well recognized, but researches on NRR in the water distribution system are insufficient in Korea. In this study, the estimation method of NRR was developed suitable for applicating in Korea considering of SCADA data, water infrastructure, and water usage patterns by modification of the UK's NRR method. The proposed method was applied to 9 DMAs and verified it's applicability by comparing with the other water loss performance indicators. It is expected that the proposed method can be used to support decision making for sustainable NRW(Nor-revenue water) management in the water distribution system.

• Journal of Korean Home Economics Education Association
• /
• v.19 no.1 s.43
• /
• pp.133-148
• /
• 2007

The Purpose of this study was to find out whether there was any difference in adolescents' decision making abilities according to the level of critical thinking in practical problem-based instruction of Home Economics. The subjects of this study ware 147 students from K girl's high school in Daegu. They were divided into two groups. The former was the experimental group, which took' practical problem-based instruction' of Home Economics. The later was the control group, which took the typical lecture-based instruction. Factor analysis, Cronbach ${\alpha}$, correlation, and two-way ANCOVA were Performed for data analysis. The results of this study are as follows: First, there was no significant difference in the steps of problem identification and information search of the decision making according to teaching methods and the level of the critical thinking ability. Second, the adolescents who took the practical problem-based instruction had shown more improvement in the steps of alternatives consideration and value of the decision making ability than those who took the typical instruction. Third, the adolescents with the high level of critical thinking ability have made much more improvement than those with the low. And it was found that in the case of adolescents with the low level of critical thinking ability, those who took the practical problem-based instruction have made much more improvement than the others who took the typical instruction. On the other hand, in the case of adolescents with the high level of critical thinking ability, those who took the typical instruction improved much more than the others who took the practical problem-based instruction.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.1
• /
• pp.167-179
• /
• 2016

The safety of SOC facilities is constantly under threat by the globally increasing abnormal climate. Responding to disasters requires prompt decision-making such as suggesting evacuation paths. For doing so, spatio-temporal information with convergence of disaster information and SOC facility information must be utilized. Such information is being collected separately by the government or related organizations, but not collectively. The collective control of the separately collected disaster information and the generation of SOC facility safety and damage information are required for prompt disaster response. Also, as disaster information requires spatio-temporal convergence in its nature, the construction of an inventory that integrates related information and assists disaster response decision-making is required. A plan to construct a facility importance, risk, and damage estimation inventory for assisting prompt disaster response decision-making is suggested in this study. Through this study, the disaster and SOC facility-related data, which are being managed separately, can be collected and standardized. The integrated information required for the estimation of facility importance, risk, and damage can be provided. The suggested system is expected to be used as a decision-making tool for proactive disaster response.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.504-510
• /
• 2002

As the Scale of construction work is enlarged, complicated and diversified, construction information from the large number of construction sites is happened at site and reported to the head office. To simultaneously control the individual or large number of sites in large number of construction information, the necessity of making extract the important point of the information and the board of director's making a suitable decision to support the fields is increased. Also, as driving the construction industry to be informative, efficiently aggregating the information created in fields, efficiently making decision and controlling the construction work is increased the importance of the company's competitiveness factor. To simultaneously control multi-construction sites in the small and medium size construction firms define the fundamental and core information factor which needed in the head office and suggest the appling method.

• Clinical and Experimental Pediatrics
• /
• v.55 no.1
• /
• pp.1-5
• /
• 2012

The need for evidence-based decision making in immunization programs has increased due to the presence of multiple health priorities, limited human resources, expensive vaccines, and limited funds. Countries should establish a group of national experts to advise their Ministries of Health. So far, many nations have formed their own National Immunization Technical Advisory Groups (NITAGs). In the Republic of Korea, the Korea Expert Committee on Immunization Practices (KECIP), established by law in the early 1990s, has made many important technical recommendations to contribute to the decline in vaccine preventable diseases and currently functions as a NITAG. It includes 13 core members and 2 non-core members, including a chairperson. Core members usually come from affiliated organizations in internal medicine, pediatrics, obstetrics, microbiology, preventive medicine, nursing and a representative from a consumer group, all of whom serve two year terms. Non-core members comprise two government officials belonging to the Korea Centers for Disease Control and Prevention (KCDC) and the Korea Food and Drug Administration. Meetings are held as needed, but at least twice a year, and sub-committees are formed as a resource for gathering, analyzing, and preparing information for the KECIP meetings. Once the sub-committees or the KCDC review the available data, the KECIP members discuss each issue in depth and develop recommendations, usually by a consensus in the meeting. The KECIP publishes national guidelines and immunization schedules that are updated regularly. KECIP's role is essentially consultative and the implementation of their recommendations may depend on the budget or current laws.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.2
• /
• pp.213-221
• /
• 2009

An aircraft collision accident is a disaster that causes great losses of inventories and lives. Though a collision avoidance warning function is provided automatically to pilots in the aircrafts by the enhancement of the aircraft capability, achieving fast decision-making to escape a collision situation is a complex and dangerous work for pilots. If an in-flight collision situation is controlled by the air traffic control system which monitors all airplanes in the air, it would be more efficient to prevent in-flight collisions because it can handle the emergency before the pilot's action. In this paper, we develop the collision avoidance warning function in the air traffic control system. Specifically, we design and implement the five stages of the collision avoidance function, and propose a visualization method which could effectively provide the operators with the trajectories and altitudes of the aircrafts in a collision situation. By developing an in-flight collision warning function in the air traffic control system that visualizes flight patterns through the state transition data of in-flight aircrafts on the flight path lines, it can effectively prevent in-flight collisions with traffic alerts. The developed function allows operators to effectively select and control the aircraft in a collision situation by providing the operators with the expected collision time, the relative distance, and the relative altitude while assessing the level of alert, and visualizing the alert information which includes the Attention-Warning-Alert phase via embodying the TCAS standard. With the developed function the air traffic control system could sense an in-flight collision situation before the pilot's decision-making moment.

• IE interfaces
• /
• v.21 no.4
• /
• pp.418-434
• /
• 2008

This paper studied issues in decision making on the production control policy of a cathode plate manufacturing process in zinc refining plant. The present production system has a long lead time from raw materials (aluminum plate) to products (cathode plate) due to many WIP inventories. Because WIP inventories are stocked at each process and moved from one place to another frequently, they are the main cause of inefficiency in the process. In this paper, to solve this problem, several production control policies have been identified and studied. Several simulation models are used to compare the performances of these production control policies. The output lead time and WIP (Work In Process) of real production system are compared with those of simulation models. PUSH, CONWIP, DBR, KANBAN and CONWIP-DBR models have been used to simulate and review the optimized production control policy that achieves the target output quantities with decreased lead time and WIP. The simulation results of each production control policy show that CONWIP and CONWIP-DBR models are the good production control policy under the present production system. Especially in present production system, CONWIP with one parameter is easier control policy than CONWIP-DBR with two parameters. Therefore CONWIP has been selected as the best optimum production control policy. With CONWIP, lead time has been reduced by 97% (from 6,653 to 187 minute) and WIP has been reduced from 1,488 to 53, compared to the present system.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.14
• /
• pp.5593-5596
• /
• 2014

Background: The objective of this study was to determine a diagnostic classification scheme using a decision tree based model. Materials and Methods: The study was conducted as a retrospective case-control study in Imam Khomeini hospital in Tehran during 2001 to 2009. Data, including demographic and clinical-pathological characteristics, were uniformly collected from 624 females, 312 of them were referred with positive diagnosis of breast cancer (cases) and 312 healthy women (controls). The decision tree was implemented to develop a diagnostic classification scheme using CART 6.0 Software. The AUC (area under curve), was measured as the overall performance of diagnostic classification of the decision tree. Results: Five variables as main risk factors of breast cancer and six subgroups as high risk were identified. The results indicated that increasing age, low age at menarche, single and divorced statues, irregular menarche pattern and family history of breast cancer are the important diagnostic factors in Iranian breast cancer patients. The sensitivity and specificity of the analysis were 66% and 86.9% respectively. The high AUC (0.82) also showed an excellent classification and diagnostic performance of the model. Conclusions: Decision tree based model appears to be suitable for identifying risk factors and high or low risk subgroups. It can also assists clinicians in making a decision, since it can identify underlying prognostic relationships and understanding the model is very explicit.

• Journal of Korea Water Resources Association
• /
• v.41 no.7
• /
• pp.725-735
• /
• 2008

Due to recent climate change, flood damages have been increased, but it is difficult to construct large hydraulic structure for flood control such as dam because of environmental, economical and political problems. For this reason, several researches and studies have tried to use washland as an alternative of hydraulic facility. Because sizes of washlands are usually smaller than those of dams or reservoirs, there can be many available locations for washlands in a basin and proper combination of these locations can reduce flood disasters efficiently. However, in case there are many available locations for washland and many combinations to consider, it is very difficult to determine the optimal combination which yields to provide the maximum benefit. For the more, hydraulic approach that used in previous studies to calculate flood reduction effect needs a lot of time for calculation and sometimes can not give the final result. In this study, the flood reduction effect of washland is calculated by hydrologic approach and decision making model for optimal location of washland using genetic algorithm for determination of optimal solution is developed. The developed model has been applied to the Ansung River basin in order to examine the applicability and the application result shows that developed model can be used as decision making model for washland.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.138-145
• /
• 2016

This study was conducted to examine the effects of a career coaching program on nursing students' career decision making self efficacy, self-leadership, and employment-stress. The study was designed using a nonequivalent control group pretest-posttest design, and data were collected between June 15 and July 31, 2016. The participants consisted of 62 4-year nursing students in D College of B City who were assigned to an experimental group (n=32) or a control group (n=34). The career coaching program consisted of 10 sessions of combined individual coaching, small group coaching and group coaching. The data were analyzed using descriptive analysis, a t-test, ${\chi}^2$ test, and paired t-test with the SPSS/WIN 21.0 program. After receiving the career coaching program, a difference was observed in career decision making self efficacy (t=4.99, p<0.001), self-leadership (t=5.08, p<0.001), and employment-stress (t=5.08, p<0.001) of the experimental group. The results of this study indicate that the career coaching program was effective at increasing career decision making self efficacy and self-leadership, as well as decreasing employment-stress in nursing students.