• 한국ITS학회 논문지
• /
• 제10권5호
• /
• pp.1-13
• /
• 2011

현재 DSRC(Dedicated Short Range Communication)를 이용한 통행료자동요금징수시스템이 전국 영업소에 구축 되면서 많은 차량용 단말기가 보급되었다. 이러한 통행료자동요금징수시스템 및 차량용 단말기의 인프라를 이용한 교통정보 수집 및 제공, 신호제어, 대중교통정보제공 및 관리 등 다양한 분야의 ITS 서비스를 위한 연구개발 및 사업화가 추진 중에 있다. 특히 차량용 단말기와 통행료자동지불시스템에 사용되는 노변장치를 이용한 교통정보 수집 및 제공 부분에 많은 연구가 이루어지고 있지만 DSRC의 응용 부분 표준과 교통정보 수집 및 제공을 위한 정보교환 표준이 명확하게 이루어지지 않았다. 이에 국토해양부에서 고시한 "기본교통정보교환 기술기준IV"를 DSRC 통신에서 교환되는 Action 프리미티브를 활용해 DSRC관련 표준의 수정 없이 표준화된 교통정보를 수집 및 제공하는 방안을 제안하고자 한다. 본 연구에서 제안하는 표준적용방안을 현재 ETCS(Electronic Toll Collection System)에서 사용되는 RSE(Road Side Equipment)와 OBE에 적용하여, 실제 도로에서 4대의 차량을 이용한 다양한 주행시험을 통해 시스템의 유효성 및 성능을 확인 하였다. 도로 주행시험 결과 약 97%의 통신 성공률을 통해 본 논문에서 제안한 표준 적용 방안의 유효성을 확인하였고, 약 3%의 실패를 통해 교통정보와 그 외 서비스 부분의 적용을 위해 발생할 수 있는 문제점을 분석하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권10호
• /
• pp.1308-1318
• /
• 2010

The purpose of this study was to evaluate the effect of replacing soybean meal with treated castor meal with (CMT) or without lime (CMNT) on the nutrient intake, performance, carcass characteristics, and yield of commercial cuts of beef cattle from a feedlot. Thirty male, castrated, crossbreed zebu cattle were used in the study, with an average initial weight of $360{\pm}30.27\;kg$. Five animals were used as a control group and were slaughtered at the beginning of the experiment; the remaining animals (n = 25) were distributed in random blocks (repetitions), with body weight as the criterion for block assignment. The animals were fed a diet containing 65% corn silage and 35% of concentrate on dry matter (DM) basis. Five diets consisted of four levels of soybean meal (SM) substituted with CMT (0, 33, 67 and 100%) on a DM basis and a diet with 100% of SM replaced with CMNT. At the end of the experiment, all animals were slaughtered, and their gastrointestinal tracts were emptied to determine their empty body weights (EBW). No significant effects were observed (p>0.05) for the substitution of soybean meal with CMT on intake of dietary nutrients, the average daily body weight gain (ADG) or EBW gain (EBWG). In spite of greater (p<0.05) ricin intake for the diet containing CMNT (3.06 mg/kg BW) compared to the CMT diet (0.10 mg/kg BW/d), there were no effects (p>0.05) on intake of dietary nutrients, ADG or EBWG. The average intake of DM and the ADG were 10,664.63 and 1,353.04 g/d, respectively. Regarding carcass characteristics, only carcass yield in relation to body weight was linearly reduced (p<0.05) upon substitution of SM by CMT. There was no effect (p>0.05) of the substitution of SM by CMT or CMNT on the yield of carcass basic cuts. CMT prices that are higher than 85% of the SM price do not economically justify the use of CMT. For CMT prices between 20 and 80% of the SM price, the optimal level was 67% substitution, while for prices below 15% of the SM price, the optimal level was 100% substitution with CMT. It can be concluded that treated castor meal with 6% lime can totally replace soybean meal in beef cattle diets.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 1999년도 춘계공동학술대회:정보화시대의 지식경영
• /
• pp.426-426
• /
• 1999

;There are many sources of uncertainty in a typical production and inventory system. There is uncertainty as to how many items customers will demand during the next day, week, month, or year. There is uncertainty about delivery times of the product. Uncertainty exacts a toll from management in a variety of ways. A spurt in a demand or a delay in production may lead to stockouts, with the potential for lost revenue and customer dissatisfaction. Firms typically hold inventory to provide protection against uncertainty. A cushion of inventory on hand allows management to face unexpected demands or delays in delivery with a reduced chance of incurring a stockout. The proposed strategies are used for the design of a probabilistic inventory system. In the traditional approach to the design of an inventory system, the goal is to find the best setting of various inventory control policy parameters such as the re-order level, review period, order quantity, etc. which would minimize the total inventory cost. The goals of the analysis need to be defined, so that robustness becomes an important design criterion. Moreover, one has to conceptualize and identify appropriate noise variables. There are two main goals for the inventory policy design. One is to minimize the average inventory cost and the stockouts. The other is to the variability for the average inventory cost and the stockouts The total average inventory cost is the sum of three components: the ordering cost, the holding cost, and the shortage costs. The shortage costs include the cost of the lost sales, cost of loss of goodwill, cost of customer dissatisfaction, etc. The noise factors for this design problem are identified to be: the mean demand rate and the mean lead time. Both the demand and the lead time are assumed to be normal random variables. Thus robustness for this inventory system is interpreted as insensitivity of the average inventory cost and the stockout to uncontrollable fluctuations in the mean demand rate and mean lead time. To make this inventory system for robustness, the concept of utility theory will be used. Utility theory is an analytical method for making a decision concerning an action to take, given a set of multiple criteria upon which the decision is to be based. Utility theory is appropriate for design having different scale such as demand rate and lead time since utility theory represents different scale across decision making attributes with zero to one ranks, higher preference modeled with a higher rank. Using utility theory, three design strategies, such as distance strategy, response strategy, and priority-based strategy. for the robust inventory system will be developed.loped.

• 대한간호학회지
• /
• 제30권2호
• /
• pp.319-330
• /
• 2000

This study is aimed at analyzing the trend of research on the use of exercise in nursing research, through suggesting directions for future research and implementation of the various exercise therapies. Research studies were taken from dissertations and theses selected from the Academic Society Journals of nursing science, Journals from universities, medical and nursing schools, research institutes in various universities, the Central Journal of Medicine, and the New Medical Journal. The research published between 1970 and 1997 in Korea were analyzed, 51 research were selected. The research are analyzed according to: published time, source of the research, research design, subjects, sample size, dependant variables, exercise therapy, and effect of exercise therapy. The results were as follows: 1. Research on exercise therapy increased rapidly in the 1990's. At this time, 88.2% of research was published. 2. Research areas included: 54.9% non- degree research, 27.5% Doctoral theses, and 17.6% Master's theses. 3. The experimental design included: 66.7% non- equivalent control group pre-test/ post-test design and 29.4% one group pre-test/post- test design. 4. Out of the Subjects: 52.9% were patients with various health problems, and 47.1% were healthy individuals. 5. Sample size included: 52.9% with above 31 subjects, 11.8% with 11~15 and 26~30. 6. Exercise therapy was analyzed by type, intensity, frequency, duration, and period. 1) The Types: Aerobic exercise at 60.8% was the most common, active exercise for muscle strengthening and building made up 21.6%. 2) Exercise with 40~65% intensity comprised 25.5%, 70~85% with 7.8%, and no description of the intensity was 66.7%. 3) Frequency of 3~5 per week was the most common at 78.4%. 4) Duration: 15~60 minutes was the most common length of time at 76.5%. 5) Periods: More than 5 weeks at 82.3% were the most common in their categories. 7. Dependant variables: Psychological response was measured as a dependant variable in 92.2%, Cardio-pulmonary function 88.2%, Body Composition was 86.3%, Physical Response was 60.8%, Lipid Metabolism was 58.8%, Physical Strength was 49.0%, Glucose Metabolism was 25.5%, Activities of Daily Living was 17.6% and others added to be 3.9%. 8. The effect of Exercise Therapy was categorized into 'positive', 'partially positive', and 'no effect' according to dependant variables: Having a positive effect - Glucose Metabolism (93.3%), Physical Response (85.0%), Activities of Daily Living (81.8%), Psychological Response (71.6%), Lipid Metabolism (67.6%), Cardio- pulmonary Function (63.6%), Physical Strength (68.1%), and Body Composition (56.4%). The following suggestions can be made on the above findings: 1. Research findings on Exercise Therapy as a Nursing Intervention need to be described by their elements of type, intensity, frequency, duration and period. 2. Toproperly study the positive effects of Exercise Therapy, there needs to be ⑴ appropriate research design, ⑵ selection criteria for the subjects ⑶ contents of exercise prescription to individuals or groups ⑷ measurement criterion for the dependent variables. 3. Meta-analysis on exercise therapy also needs to be done to analyze and integrate the various results.

• 한국산학기술학회논문지
• /
• 제17권2호
• /
• pp.58-65
• /
• 2016

본 연구는 조직공학용 지지체로 사용될 막을 개발하기 위한 초도 연구 수행으로, 염화나트륨(NaCl)을 기공형성체로 혼합한 폴리카프로락톤(PCL)용액을 유리 캐스팅판에 분주한 후 필름 어플리케이터를 이용하여 다공성 PCL필름을 성형하였다. 성형된 필름은 건조 후 증류수에 침지시켜 NaCl을 추출하여 최종 멤브레인형 다공성 지지체를 제조하였다. 3차원 다공망을 형성시키기 위하여 NaCl을 기공형성체로 이용하였으며 $4^{\circ}C$, 실온, $40^{\circ}C$의 세 가지 건조조건에 따른 다공망의 형성과 형태를 주사전자현미경(SEM)을 이용하여 관찰 하였으며 기초적인 안전성 확보를 위한 세포독성평가를 시행하였다. 세 가지의 건조조건별 결과에서는 실온 건조조건에서 거대기공과 미세기공이 혼재된 3차원 다공망이 우수하게 형성된 것이 관찰되었으며 세포독성 시험결과 ISO10993-5 규격의 세포독성 판단기준에 따라 grade 2(mildly cytotoxic)로 나타난바 생체용으로 적합하다고 볼 수 있다. 본 연구를 통하여 멤브레인형 다공성 지지체 제조에 건조조건이 3차원 다공망의 형성 및 거대기공과 미세기공이 함께 형성되는 것에도 영향을 미치는 것으로 나타났으며 이 결과는 다공성 멤브레인 지지체의 분해성 조절 및 약물 담지 효과를 개선하기 위한 연구에서 다공도의 조절에 대한 기초적인 공정이 될 수 있다.

• 대한한의학방제학회지
• /
• 제17권2호
• /
• pp.53-63
• /
• 2009

Objective : To compare the contents of heavy metals, residual pesticides and sulfur dioxide before/after a decoction. Methods : The heavy metal contents before/after a decoction were measured by Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES) and mercury analyzer. In order to analyze pesticides in 4 samples we used simultaneous multi-residue analysis of pesticides by GC/ECD, which was followed by GC/MSD analysis to confirm the identity of the detected pesticide in each sample. In addition, the contents of sulfur dioxide ($SO_2$) were performed by Monier-Williams distillation method. Results: 1. The mean values of heavy metal contents (mg/kg) for the samples were as follows: Jaeumganghwa-tang (before decoction - Pb; 1.190, Cd; 0.184, As; 0.099 and Hg; 0.028, after decoction - Pb; .033, Cd; 0.003, As; 0.005 and Hg; 0.001), Yukmijiwhang-tang (before decoction - Pb; 0.484, Cd; 0.133, As; 0.053 and Hg; 0.009, after decoction - Pb; 0.065, Cd; 0.008, As; 0.007 and Hg; not detected), Bojungikgi-tang (before decoction - Pb; 0.863, Cd; 0.197, As; below 0.016 and Hg; 0.011, after decoction - Pb; 0.071, Cd; 0.009, As; 0.004 and Hg; 0.001) and Ssangwha-tang (before decoction - Pb; 1.511, Cd; 0.212, As; 0.094 and Hg; 0.016, after decoction - Pb; 0.029, Cd; 0.006, As; 0.005 and Hg; 0.0004). 2. Contents (mg/kg) of sulfur dioxide ($SO_2$) before a decoction in Jaeumganghwa-tang, Yukmijiwhang-tang and Ssangwha-tang exhibited 22.7, 107.3 and 5.5, respectively. However, contents of sulfur dioxide after a decoction in all samples were not detected. 3. Contents (mg/kg) of residual pesticides before/after a decoction in all samples were not detected. Conclusion : These results will be used to establish a criterion of heavy metals, residual pesticides and sulfur dioxide.

• 대한한의학회지
• /
• 제30권4호
• /
• pp.108-117
• /
• 2009

Objective: To compare the contents of heavy metals, residual pesticides and sulfur dioxide before/after a decoction. Methods: The heavy metal contents before/after a decoction were measured by inductively-coupled plasma atomic emission spectrometer (ICP-AES) and mercury analyzer. In order to analyze pesticides in 5 samples we used simultaneous multi-residue analysis of pesticides by GC/ECD, which was followed by GC/MSD analysis to confirm the identity of the detected pesticide in each sample. In addition, the contents of sulfur dioxide ($SO_2$) were performed by Monier-Williams distillation method. Results: 1. The mean values of heavy metal contents (mg/kg) for the samples were as follows: Sipjeondaebo-tang (before decoction - Pb; 1.163, Cd; 0.257, As; 0.080 and Hg; 0.016, after decoction - Pb; 0.059, Cd; 0.007, As; 0.006 and Hg; 0.0003), Palmul-tang (before decoction - Pb; 1.181, Cd; 0.242, As; 0.152 and Hg; 0.014, after decoction - Pb; 0.067, Cd; 0.008, As; 0.008 and Hg; 0.0003), Sagunja-tang (before decoction - Pb; 1.285, Cd; 0.283, As; 0.063 and Hg; 0.012, after decoction - Pb; 0.047, Cd; 0.009, As; 0.004 and Hg; not detected) and Samul-tang (before decoction - Pb; 1.025, Cd; 0.169, As; 0.099 and Hg; 0.013, after decoction - Pb; 0.065, Cd; 0.007, As; 0.010 and Hg; 0.001). 2. Contents (mg/kg) of residual pesticides before/after a decoction were not detected in any samples. 3. Contents (mg/kg) of sulfur dioxide ($SO_2$) before a decoction in Sipjeondaebo-tang, Palmul-tang, Sagunja-tang and Samul-tang exhibited 5.0, 6.0, 14.0 and 6.9, respectively. However, contents of sulfur dioxide after a decoction were not detected in any samples. Conclusion: These results will be used to establish a criterion for heavy metals, residual pesticides and sulfur dioxide.

• Design & Manufacturing
• /
• 제13권4호
• /
• pp.10-16
• /
• 2019

Semiconductor chip is bonded to the substrate by melting solder bumps. In general, the chip bonding is applied by a Reflow process or a Thermo-Compression(TC) bonding process. In this paper, we introduce a Laser Assisted Thermo-Compression bonding (LATCB) process to improve the anxiety of the existing process(Reflow, TC bonding). In the LATCB process, the chip is bonded to the substrate by irradiating a laser with a uniform energy density in the same area as the chip to melt only the solder bumps and press the chip with a Transparent Compression Module (TCM). The TCM consists of a fused silica header for penetrating the laser and pressurizing the chip, and a piezoelectric actuator (P.A.) coupled to both ends of the header for micro displacement control of the header. In addition, TCM is a structure that can pressurize the chip and deliver it to the chip and solder bumps without losing the energy of the laser. Fused silica, which is brittle, is vulnerable to deformation, so the header may be damaged when an external force is applied for pressurization or a displacement differenced is caused by piezoelectric actuators at both ends. On the other hand, in order to avoid interference between the header and the adjacent chip when pressing the chip using the TCM, the header has a notch at the bottom, and breakage due to stress concentration of the notch is expected. In this study, the thickness and notch length that the header does not break when the external force (500 N) is applied to both ends of the header are optimized using structural analysis and Coulomb-Mohr failure theory. In addition, the maximum displacement difference of the P.A.s at both ends where no break occurred in the header was derived. As a result, the thickness of the header is 11 mm, and the maximum displacement difference between both ends is 8 um.

• 대한원격탐사학회지
• /
• 제31권2호
• /
• pp.149-160
• /
• 2015

원격탐사 자료 기반의 식생지수 시계열 자료를 이용함에 있어서 가장 중요한 것은 구름이나 에어로졸에 의한 자료의 품질저하 문제이다. 이 연구에서는 MODIS09 지표 분광반사도 자료를 이용하여 구름영향에 의한 저품질 자료를 제거한 뒤 결손자료를 내삽, 평활하여 연속적인 Normalized Difference Vegetation Index (NDVI) 시계열 자료를 생산하였다. 구름에 의한 영향을 제거하기 위한 방법으로 MODIS 분광반사도 자료를 이용한 5가지의 구름탐지기법을 선정하여 비교, 평가하였다. 위성자료에서 제공하는 품질관리정보 (Quality Assessment, QA)에서 구름이라고 판단한 경우, MODIS09 Band 3 반사도가 10% 이상인 경우와 20% 이상인 경우, Cloud Detection Index (CDI)가 임계값 이상인 경우, 센서 천정각이 $32.25^{\circ}$ 이상인 경우를 각각 구름으로 판단하였다. 구름탐지로 인해 발생한 자료의 결손은 선형적 내삽 기법을 이용하여 보정한 뒤 Savitzky-Golay (S-G) 필터와 웨이브렛 변환을 각각 적용하여 평활하였다. 구름 탐지 기법은 10% 이상 Band 3 반사도 제거 기법(85%), Quality Control (QC) (82%), 20% 이상 Band 3 반사도 제거 기법(81%)의 순으로 높은 구름탐지율을 보였다. 웨이브렛 변환은 선형의 시계열 패턴을 얻을 수 있지만 원 자료의 최대값을 반영하지 못하는 반면 S-G 필터는 구름에 의한 신뢰도 낮은 값은 제거하면서도 NDVI 원 자료의 최대값을 유지하여 시계열 자료의 계절적 특성을 잘 보여주는 것을 확인하였다. 이 연구에서는 구름의 탐지, 결손 내삽, 평활 기법의 순차적인 자료처리기법을 적용하여 구름 영향을 제거한 고품질의 시계열 자료의 생산이 가능함을 확인하였다.

• 한국균학회소식:학술대회논문집
• /
• 한국균학회 2015년도 추계학술대회 및 정기총회
• /
• pp.41-41
• /
• 2015

Oomycetes belong to the kingdom Straminipila, a remarkably diverse group which includes brown algae and planktonic diatoms, although they have previously been classified under the kingdom Fungi. These organisms have evolved both saprophytic and pathogenic lifestyles, and more than 60% of the known species are pathogens on plants, the majority of which are classified into the order Peronosporales (includes downy mildews, Phytophthora, and Pythium). Recent phylogenetic investigations based on DNA sequences have revealed that the diversity of oomycetes has been largely underestimated. Although morphology is the most valuable criterion for their identification and diversity, morphological species identification is time-consuming and in some groups very difficult, especially for non-taxonomists. DNA barcoding is a fast and reliable tool for identification of species, enabling us to unravel the diversity and distribution of oomycetes. Accurate species determination of plant pathogens is a prerequisite for their control and quarantine, and further for assessing their potential threat to crops. The mitochondrial cox2 gene has been widely used for identification, taxonomy and phylogeny of various oomycete groups. However, recently the cox1 gene was proposed as a DNA barcode marker instead, together with ITS rDNA. To determine which out of cox1 or cox2 is best suited as universal oomycete barcode, we compared these two genes in terms of (1) PCR efficiency for 31 representative genera, as well as for historic herbarium specimens, and (2) in terms of sequence polymorphism, intra- and interspecific divergence. The primer sets for cox2 successfully amplified all oomycete genera tested, while cox1 failed to amplify three genera. In addition, cox2 exhibited higher PCR efficiency for historic herbarium specimens, providing easier access to barcoding type material. In addition, cox2 yielded higher species identification success, with higher interspecific and lower intraspecific divergences than cox1. Therefore, cox2 is suggested as a partner DNA barcode along with ITS rDNA instead of cox1. Including the two barcoding markers, ITS rDNA and cox2 mtDNA, the multi-locus phylogenetic analyses were performed to resolve two complex clades, Bremia lactucae (lettuce downy mildew) and Peronospora effuse (spinach downy mildew) at the species level and to infer evolutionary relationships within them. The approaches discriminated all currently accepted species and revealed several previously unrecognized lineages, which are specific to a host genus or species. The sequence polymorphisms were useful to develop a real-time quantitative PCR (qPCR) assay for detection of airborne inoculum of B. lactucae and P. effusa. Specificity tests revealed that the qPCR assay is specific for detection of each species. This assay is sensitive, enabling detection of very low levels of inoculum that may be present in the field. Early detection of the pathogen, coupled with knowledge of other factors that favor downy mildew outbreaks, may enable disease forecasting for judicious timing of fungicide applications.