• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.508-513
• /
• 2003

This paper is concerned with a mixed control with aerodynamic fin and side thrusters applied to an agile missile using two-time scale dynamic inversion and linear time-varying control technique. The nonlinear dynamic inversion method with the weighting function allocates the desired control inputs (aerodynamic fin and side thrusters) to track a reference trajectory, and the time-varying control technique guarantees the robustness for the uncertainties. Closed-loop stability is achieved by the assignment of the extended-mean of these linear time-varying eigenvalues to the left half complex plane. The proposed schemes are validated by nonlinear simulations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.219-221
• /
• 2006

The recently developed autopilot controller can make the input-output (I/O) dynamic characteristics of the nonlinear missile dynamics linear and independent of flight conditions. However, significant fin actuator dynamics can degenerate the I/O dynamic performance of the overall system. In this paper, we propose a singular perturbation-like method to compensate the effect of significant fin actuator dynamics in nonlinear missile control. The proposed compensation method does not require the time derivatives of fin angles but can maintain the linear I/O dynamic characteristics provided by the recently developed autopilot controller.

• 진공이야기
• /
• 제3권1호
• /
• pp.16-21
• /
• 2016

FinFETs are able to be scaled down to 22 nm and beyond while suppressing effectively short channel effect, and have superior performance compared to 2-dimensional (2-D) MOSFETs. Bulk FinFETs are built on bulk Si wafers which have less defect density and lower cost than SOI(Silicon-On-Insulator) wafers. In contrast to SOI FinFETs, bulk FinFETs have no floating body effect and better heat transfer rate to the substrate while keeping nearly the same scalability. The bulk FinFET has been developed at 14 nm technology node, and applied in mass production of AP and CPU since 2015. In the development of the bulk FinFETs at 10 nm and beyond, self-heating effects (SHE) is becoming important. Accurate control of device geometry and threshold voltage between devices is also important. The random telegraph noise (RTN) would be problematic in scaled FinFET which has narrow fin width and small fin height.

• 한국항해항만학회지
• /
• 제31권7호
• /
• pp.597-603
• /
• 2007

A predictive controller can solve a control problem related to a disturbance-dominant system such as roll stabilization of a ship in waves. In this paper, a predictive controller is developed for a fin stabilizer. Future wave-induced moment is modeled simply using two typical regular wave components for which six parameters are identified by the recursive Fourier transform and the least squares method using the past time series of the roll motion. After predicting the future wave-induced moment, optimal control theory is applied to discover the most effective command fin angle that will stabilize the roll motion. In the results, wave prediction performance is investigated, and the effectiveness of the predictive controller is compared to a conventional PD controller.

• 전기학회논문지
• /
• 제59권1호
• /
• pp.70-75
• /
• 2010

The objective of this paper is to propose a new velocity measurement method for an electro-mechanical fin actuator. The model of the electro-mechanical fin actuator includes uncertainties such as unknown disturbances and parameter variations in flight condition. So, an electro-mechanical fin actuator system needs robust control algorithm which requires not only position information but also velocity information. Usually, analog tachometers have been used for velocity feedback in an electro-mechanical fin actuator. However, using these types of sensors have problems such as the cost, space, and malfunction. These problems lead to propose a new velocity measurement method using linear type Hall-effect sensor. In order to verify the proposed method, several experiments are performed using Model Following Sliding Mode Controller(MFSMC). It is shown that the MFSMC with a new velocity measurement method using linear type Hall-effect sensor can satisfy the requirements without using of velocity sensor.

• 제어로봇시스템학회논문지
• /
• 제10권7호
• /
• pp.658-668
• /
• 2004

This paper is concerned with a control allocation strategy using the dynamic inversion and the pseudo inverse control which generates the nominal control input trajectories. In addition, an autopilot design method is proposed by using time-varying control technique which is time-varying version of the pole placement of linear time-invariant system for an agile missile with aerodynamic fin and thrust vectoring control. The control allocation proposed in this paper is capable of extracting the maximum performance by combining each control effector, aerodynamic fin and thrust vectoring control. The adopted time-varying control technique for the autopilot design enhances the robustness of the tracking performance for a reference command. The main results are validated through the nonlinear simulations with aerodynamic data.

• 한국군사과학기술학회지
• /
• 제7권4호
• /
• pp.107-113
• /
• 2004

In order to model a connection part between a control fin and actuator, the related characteristics of a dynamic stiffness were extracted from experiments. These characteristics include the static stiffness of a control fin and the dynamic stiffness of an actuator, so they are called the mixed dynamic stiffness here. This mixed dynamic stiffness is used as the boundary condition of a control fin connected to an actuator when the flutter characteristics are analyzed. The simulated stiffness of an actuator is corrected from the experiment results and the mixed dynamic is finally formulated in the domain of frequencies.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.525-530
• /
• 2003

This paper is concerned with a control allocation strategy using the dynamic inversion which generates the nominal control input trajectories, and autopilot design using the time-varying control technique which is time-varying version of pole placement of linear time-invariant system for an agile missile with aerodynamic fin and thrust vectoring control. Dynamic inversion can decide the amount of the deflection of each control effector, aerodynamic fin and thrust vectoring control, to extract the maximum performance by combining the action of them. Time-varying control technique for autopilot design enhance the robustness of the tracking performance for a reference command. Nonlinear simulations demonstrates the dynamic inversion provides the effective nominal control input trajectories to achieve the angle of attack command, and time-varying control technique exhibits good robustness for a wide range of angle of attack.

• 한국군사과학기술학회지
• /
• 제6권3호
• /
• pp.122-130
• /
• 2003

This paper is concerned with a control allocation strategy using the dynamic inversion and the pseudo inverse control which generates the nominal control input trajectories, and autopilot design using time-varying control technique which is time-varying version of pole placement of linear time-invariant system for an agile missile with aerodynamic fin and thrust vectoring control. Control allocation of this paper is capable of extracting the maximum performance from each control effector, aerodynamic fin and thrust vectoring control, by combining the action of them. Time-varying control technique for autopilot design enhance the robustness of the tracking performance for a reference command. The main results are validated through the nonlinear simulation.

• 제어로봇시스템학회논문지
• /
• 제10권10호
• /
• pp.947-955
• /
• 2004

This paper is concerned with a mixed control with aerodynamic fin and side thrust control applied to an agile missile using a dynamic inversion and a time-varying control technique. The nonlinear dynamic inversion method with the weighting function allocates the desired control inputs(aerodynamic fin and side thrust control) to achieve a reference command, and the time-varying control technique plays the role to guarantee the robustness for the uncertainties. The proposed schemes are validated by nonlinear simulations with aerodynamic data.