• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1335-1337
• /
• 2003

한국형 고속 전철 과제는 6년의 과제 기간을 가시는 국가 연구 사업으로, 한국 실정에 적합한 차세대 고속 전철을 시험 제작하여 운용하는 것이 목적이다. 시속 350 km/h의 운행 속도를 목표로 하는 한국형 고속 전철은 현재 개발이 완료되어, 시험 주행 트랙에서 증속을 위한 시험 운행을 계속하고 있다. 한국형 고속 전철은 열차 내 각종 제어 장치들 간의 데이터 교환를 위해서 실시간 네트워크인 열차통신 네트워크(Train Communication Network; TCN)를 사용한다. 약 10년간의 표준 보완 기간을 거쳐서 1999년 국제 표준으로 확정된 TCN(IEC61373)은 열차 전용의 실시간 통신 네트워크로 열차 장치의 제어 및 진단에 적합한 다양한 기능과 특징을 가지고 있다. 한국형 고속전철은 열차의 주 제어 및 감시를 담당하는 주관 제어장치(SCU, Supervisory Control Unit)와 열차 안전에 중요한 역할을 하는 자동 열차 제어 장치(ATC, Automatic Train Control)을 포함하는 55개의 제어 장치들이 TCN으로 연결되어서 상호간의 데이터 교환을 수행하도록 구성되어 있다. 본 논문에서는 한국형 고속전철에 사용될 TCN의 구조와 실제 필드에 사용되어지기 위해서 필수적으로 필요한 네트워크의 고장 진단 기법에 대해서 설명한다.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.616-620
• /
• 2003

Brake action is important in train operation. In case of diesel motor cas, coachs and wagon, the brake system is only act on the stop of train, but it is emphasis on safety and convenience in urban transit system such as EMU, subwar, AGT, etc. Brake of EMU has two types. one is called service brake that is used at normal operation. The other is called emergency brake. it is used at emergency operation. Service brake bring a EMU to a halt through a blending brake that form electronic brake and frictional brake. Generally EMU compose motor car and trailer car. Blending brake bring a EMU to a halt through a blending brake that form electronic brake of motor car and frictional brake of trailer car. Blending braking technology have different characteristics each nations or manufacturing companies. but deceleration command that is parameter decide blending brake. According to deceleration command, electronic brake and frictional brake are applied differently So braking power is different. electronic brake and frictional brake must be used appropriately as deceleration command. Also braking facilities must be stopped EMU more economically and safely through revision of algorism about blending brake according to output diagram. Thus The purpose of paper is to propose blending braking control way as consideration of braking output diagram used deceleration command that influence blending brake of EMU.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.27 no.2
• /
• pp.54-69
• /
• 2019

The primary objective of this paper is to introduce the application of Human-Machine Interface (HMI) and Augmented Reality (AR) technologies in flight operations. These include: self-check-in, baggage handling, airport security and surveillance, airport operations monitoring, In-Flight Entertainment and Connectivity (IFEC), cockpit design, and cabin crew support. This paper investigates the application status and development trends of HMI and AR technologies for airports and aircraft. These technologies can provide more efficient in-flight passenger service and experience by using AR devices. This paper also discusses the developments such as; the Integrated Control Application (ICA) for the IFEC interface, AR flight simulation training program using the fixed-based simulator, and the AR aircraft cabin interior concept test program. These applications present how HMI and AR techniques can be utilized in actual flight operations. The developed programs in this paper can be applied to their purpose within aircraft interiors and services to enhance efficiency, comfort, and experience.

• Fisheries and Aquatic Sciences
• /
• v.25 no.3
• /
• pp.158-166
• /
• 2022

The complete mitochondrial genome of Tremoctopus violaceus was sequenced to analyze its organization and phylogenetic status within the order Octopoda. The mitochondrial genome of T. violaceus had a structure and organization similar to that of other Octopoda. The content of the nucleotides A, C, G, and T was 31.68 %, 7.71 %, 20.02 %, and 40.58 %, respectively. All protein-coding genes (PCG) began with the ATG codon, excluding ND4 and ATP6, which began with ATC and ATT, respectively, and terminated with TAG, TAA, TA, or T. Codons for isoleucine were the most used codons, whereas those for arginine were used the least. Two extra tRNAs, trnN and trnL, were found in the control region. These tRNAs have a D-armless structure. The control region had excess A + T content (83.16 %) and a stem-loop structure with two elements, which is reported for the first time in Octopoda by our study. Bayesian inference using 13 PCG revealed that Octopus and Octopodidae were polyphyletic, and that Tremoctopodidae diverged relatively earlier within Octopoda. The mitochondrial genome of T. violaceus and its characteristics may help to understand the evolutionary history of Octopoda and establish a marine biodiversity conservation strategy.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2169-2173
• /
• 2003

The development project of Korean High Speed Train (KHST) was started in 1996. As a national research project, the KHST project aims for a development of the next generation prototype train that has a maximum speed of 350 km/h. The development process of prototype KHST including 7 vehicles was completed last year and currently the prototype train is on its way of test running over the test track with gradually increased speed. The prototype KHST uses the real time network called TCN (Train Communication Network) for exchanging information between various onboard control equipments. After 10 years of development and modification period, TCN was confirmed as international standard (IEC61375-1) for the electrical railway equipment train bus. In the prototype KHST, all major control devices are connected by TCN and exchange their information. Such devices include SCU (Supervisory Control Unit), ATC (Automatic Train Control), TCU (Traction Control Unit), and so forth. For each device that sends and receives data using TCN, a device has to find out whether TCN is in normal or failure state before its data exchange. And also a device must have a proper method of data validation that was received in a normal TCN state. This is a one of the major important factors for devices using network. Some misleading information can lead the entire system to a catastrophic condition. This paper briefly explains how TCN was implemented in the prototype KHST train, and also shows what kind of the fault diagnosis method was adopted for a fail safe operation of TCN system

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.9
• /
• pp.36-48
• /
• 1999

Controlled transfer (CT) service has been recently proposed as a new ATM transfer capability for high-speed data applications, which used a credit-based flow control. This paper investigates buffer allocation schemes for CT service and proposes an improved dynamic bugger allocation scheme. In order to improve the responsiveness to a congestion, the proposed method is considered the load factor of a link when determining the amounts of virtual connection (VC)s buffer allocation. Also, in this paper we compare the performance of the proposed method with those of the existing buffer allocation methods such as flow controlled virtual channels (FCVC) and zero queueing flow control (ZQFC) through simulation. Simulation results show tat the proposed scheme exhibits a better performance than the existing schemes in terms of throughput, fairness, queue length and link utilization.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.117-126
• /
• 2014

In this paper, we propose an efficient algorithm which can relocate the datablock of an aircraft when it is overlapped. If the datablock which represents the aircraft information in the control display is overlapped, relocation without overlapping is necessary because it is difficult to control the air traffic in this situation. The proposed algorithm relocates the data block with minimum movement by considering the characteristics of datablock. The moving distance of minimum movement is calculated using the height or width of rectangle which is created during overlapping. And the moving direction of minimum movement is calculated by considering the directivity of the datablock. When the distance between the target symbol and datablock is distant enough, the relocation is carried out using the existing algorithm as a special case. The proposed algorithm shows improved performance in comparison with the existing algorithm due to the fact that it considers many different cases of the datablock.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.4
• /
• pp.225-235
• /
• 2016

Objective: The aim of this study is to model all levels of situation awareness (SA), which would be able to predict situation awareness quantitatively. Background: When measuring situation awareness, directly measuring SA methods such as SAGAT and SART have been utilized. Several approaches (cognitive modeling approaches) were introduced to model SA but level 3 SA was not completed. For real-life situation, however, it is necessary to detect the problematic level of SA rather than overall SA. Therefore, we proposed a new model of all levels of SA in this study. Method: In order to model all levels of SA, this study chose factors in ACT-R architecture through literature review. ATC (Air Traffic Control)-related simulation task was video-taped to analyze human behaviors in order to model all levels of SA including level 3. Results: As a result, regression analyses show that cognitive activities (neural activations) represented for all levels of SA were highly correlated with SAGAT. Conclusion: In conclusion, neural activations in ACT-R could be proved to be effective to model all levels of SA. Application: Our SA model could be used to predict all levels of SA quantitatively without directly measuring the SA of operators.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1679-1684
• /
• 2004

This paper introduces a novel approach that can provide the three dimensional information on the movement of a spreader by using two CCD cameras and a laser distance sensor, which enables an ALS (Automatic Landing System) to be used for yard cranes at a harbor. So far a kind of 2D Laser scanner sensor or laser distance measuring units are used as corner detectors for the geometrical matching between the spreader and a container, which provides only 2D information which is not enough for an accurate and fast ALS system required presently. In addition to this deficiency in performance, the price for the system is too high to be adopted widely for the ALS. Therefore, to overcome these defects, a novel method to acquire the three dimensional information for the movement of a spreader including skew and sway angles is proposed using two CCD cameras and a laser distance sensor. To show the efficiency of proposed algorithm, real experiments are performed to show the accuracy improvement in distance measurement by fusing the sensory information of CCD camera and laser distance sensor.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.1
• /
• pp.22-31
• /
• 2014

Military UAV(Unmanned Aerial Vehicle) operated as a RC(Remotely Control) model level within the limit of the military special use airspace until now. However, the high and medium altitude of URA(Unmanned Reconnaissance Aircraft) which the ROKAF have been trying to import recently is at the UAV level and needs the criteria for the classified airspace flights. The required flight criteria includes operator location, mission operation limit, equipment, etc., which are the principle and standard applied based on the airspace use for UAV. Also, the general flight rules, visual flight rules, instrument flight rules are required in order to have to be applied to the actual flight. Besides, an appliance regulation needs to be arranged regarding two-way communication, ATC and communication issue, airspace and area in-flight between UAS( Unmanned Aircraft System) users. An operation of the UAV in the air significantly requires the guarantee of the aircraft's capacity, and also the standardized flight criteria. A safe and smooth use is ensured only if this criteria is applied and understood by the entire airspace users. For the purpose, a standardized military UAV flight operations criteria that is to be applied for each airspace by UAV is to be prepared through analysis of the present state, a legend UAV system, and a special character analysis.