• 전산구조공학
• /
• 제8권2호
• /
• pp.123-132
• /
• 1995

Genetic Algorithms(GA)는 생명체의 자연진화 법칙에 기초한 최적화 방법으로 그 범용성이 높이 평가되어지고 있다. 기존의 GA는 대부분 설계변수로 2진수형 코드를 사용하는데, 이는 실수형 설계변수로 구성된 최적화 문제를 해결하기 위해 컴퓨터 주 기억용량을 많이 사용하여야 하며, 계산 시간 면에서도 비효율적이고 또한 국부탐색 능력도 떨어지는 단점이 있다. 따라서 본 연구에서는 GA에 의한 최적화과정에서 실수형 설계변수를 직접 사용할 수 있도록 교배와 돌연변이 과정을 새로이 정식화하였다. 그리고 여러 형태의 단일 및 다목적함수 최적화 문제에 대해 실수형 GA와 2진수형 GA의 결과를 비교 검토하였다. 비교 검토 결과, 실수형 GA의 성능이 2진수형 GA보다 우수함을 알 수 있었고, 일반 최적화 방법으로 실수형 GA를 사용하여도 무방하리라 본다.

• Journal of applied mathematics & informatics
• /
• 제13권1_2호
• /
• pp.441-446
• /
• 2003

Let { $X_{n}$ , n $\geq$ 1} be a sequence of independent and identically distributed random variables with a common continuous distribution function F(x) and probability density function f(x). Let $Y_{n}$ = max{ $X_1$, $X_2$, …, $X_{n}$ } for n $\geq$ 1. We say $X_{j}$ is an upper record value of { $X_{n}$ , n$\geq$1} if $Y_{j}$ > $Y_{j-1}$, j > 1. The indices at which the upper record values occur are given by the record times {u(n)}, n$\geq$1, where u(n) = min{j｜j>u(n-1), $X_{j}$ > $X_{u}$ (n-1), n$\geq$2} and u(1) = 1. We call the random variable X $\in$ Beta (1, c) if the corresponding probability cumulative function F(x) of x is of the form F(x) = 1-(1-x)$^{c}$ , c>0, 0$\leq$x$\leq$1. In this paper, we will give a characterization of the beta distribution of the first kind by considering conditional expectations of record values.s.

• The Journal of Korean Physical Therapy
• /
• 제11권1호
• /
• pp.95-102
• /
• 1999

In hemiplegic gait, walking speed is an important factor to evaluate treatment effect. The purpose of this study was to describe and compare kinematic variables during differant speed hemiplegic gaits. Six hemiplegic patients(47-69 years old) after stroke and age - matched six volunteers in good health(51-61 years old) were studied. The patients were sorted into two groups, depending on their self - speed of walking : fast speed group(3 patients, $0.74\pm0.14m/s$) and slow speed group(3 patients, $0.29\pm0.09m/s)$. The results were following. 1. In the hip joint, the fast group had lower mean value than normal but had similar pattern to normal. The slow group had continuous flexed pattern. 2. In the knee joint, the fast group had similar mean value and pattern to normal. The slow group had continuous flexed pattern. 3. In the ankle joint, the two group had dorsiflexed pattern. The fast group had similar pattern to normal. Thus, the fast group was similar gait pattern to normal.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.899-904
• /
• 2007

Improvement projects has been progressed for railway electrification and double track line in the conventional line as well as high speed line for the high speed and large transportation capability of railway. Especially, many variable operation plans are possible such as interaction between high speed line and conventional line and operation of tilting train due to the electrification of the conventional line. Railway electrification is more energy efficient and environmentally-friendly, but it has some problems such as an enormous initial construction and maintenance costs and electrical accidents. Therefore, the more intensive research will be progressed about railway electrification effectiveness for the continuous electrification project. So, we analyzed railway electrification effectiveness about the energy side using annual operation data of electric car and diesel car. The energy side was divided into energy costs and national energy consumption for analyzing electrification effectiveness about entire line and specific line. We verified advantage of energy costs and national energy consumption in this paper and this result will contribute to the progress of the continuous electrification project and the more efficient operation ways in electrification line

• Communications for Statistical Applications and Methods
• /
• 제15권4호
• /
• pp.615-631
• /
• 2008

재무자료에 대한 신용평가모형은 각각의 재무변수를 평활한 예측부도율로 변환하여 사용한다. 본 연구에서는 연속형 재무자료를 변환하여 설정된 신용평가모형의 문제점을 살펴보고, 연속형 재무변수를 다양한 형태로 범주화한 신용평가모형들을 제안한다. 범주형 재무자료를 사용해서 개발한 여러 종류의 신용평가모형들의 성과를 다양한 적합성 검증 방법으로 비교하고, 범주형 재무자료를 이용한 신용평가모형의 유용성을 토론한다.

• Structural Engineering and Mechanics
• /
• 제52권5호
• /
• pp.997-1017
• /
• 2014

According to the structure characteristics of the non-uniform beam bridge, a practical model for calculating the vibration equation of the non-uniform beam bridge is given and the application scope of the model includes not only the beam bridge structure but also the non-uniform beam with added masses and elastic supports. Based on the Bernoulli-Euler beam theory, extending the application of the modal perturbation method and establishment of a semi-analytical method for solving the vibration equation of the non-uniform beam with added masses and elastic supports based is able to be made. In the modal subspace of the uniform beam with the elastic supports, the variable coefficient differential equation that describes the dynamic behavior of the non-uniform beam is converted to nonlinear algebraic equations. Extending the application of the modal perturbation method is suitable for solving the vibration equation of the simply supported and continuous non-uniform beam with its arbitrary added masses and elastic supports. The examples, that are analyzed, demonstrate the high precision and fast convergence speed of the method. Further study of the timesaving method for the dynamic characteristics of symmetrical beam and the symmetry of mode shape should be developed. Eventually, the effects of elastic supports and added masses on dynamic characteristics of the three-span non-uniform beam bridge are reported.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1154-1159
• /
• 2004

Laser beam welding is increasingly being used in welding of structural steels. The laser welding process is one of the most advanced manufacturing technologies owing to its high speed and deep penetration. The thermal cycles associated with laser welding are generally much faster than those involved in conventional arc welding processes, leading to a rather small weld zone. Experiments are performed for Inconel 600 plates changing several process parameter such as laser power, welding speed, shielding gas flow rate, presence of surface pollution, with fixed or variable gap and misalignment between plate and plate, etc. The follow conclusions can be drawn that laser power and welding speed have a pronounced effect on size and shape of the fusion zone. Increase in welding speed resulted in an increase in weld depth/ aspect ratio and hence a decrease in the fusion zone size. The penetration depth increased with the increase in laser power . Welding characteristics of austienite Inconel 600 using a continuous wave Nd:YAG laser are experimentally investigated. This paper describes the weld ability of inconel 600 for machine structural use by Nd:YAG laser.

• International Journal of CAD/CAM
• /
• 제7권1호
• /
• pp.41-49
• /
• 2007

In density-based topology optimization, 0/1 solutions are sought. Discrete topological problems are often relaxed with continuous design variables so that they can be solved using continuous mathematical programming. Although the relaxed methods are practical, grey areas appear in the optimum topologies. SIMP (Solid Isotropic Microstructures with Penalization) employs penalty schemes to suppress the intermediate densities. SRV (the Sum of the Reciprocal Variables) drives the solution to a 0/1 layout with the SRV constraint. However, both methods cannot effectively remove all the grey areas. SRV has some numerical aspects. In this work, a new scheme SIMP-SRV is proposed by combining SIMP and SRV approaches, where SIMP is employed to generate an intermediate solution to initialize the design variables and SRV is then adopted to produce the final design. The new method turned out to be very effective in conjunction with the method of moving asymptotes (MMA) when using for the stiffness topology optimization of continuum structures for minimum compliance. The numerical examples show that the hybrid technique can effectively remove all grey areas and generate stiffer optimal designs characterized with a sharper boundary in contrast to SIMP and SRV.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1359-1361
• /
• 1996

This paper describes a design of real time fuzzy controller using Minimum fuzzy control Rule Selection Method(MRSM). The control algorithm of dynamic systems needs less computation time and memory. To reduce the computation time of fuzzy logic controller, minimum number of rules are to be selected for the fuzzy input variable. The universe of discourse is divided by the number of linguistic labels to allocate the assigned membership function to the fuzzy input variables. In this case, since fuzzy input variables are continuous, scale factor SU is tuned independently. According to increment of SU control surface is improved to adapt the change of system parameter. At this, crisp control surface is increased. With the increament of crisp control surface, fuzzy control surface is reduced. When error state deviates from desirable error state, crisp control surface is more useful than fuzzy control surface for obtaining fast rising time.

• 신경치료
• /
• 제22권3호
• /
• pp.25-29
• /
• 2018

Purpose In this study, 45 students were divided into task - oriented group, task - oriented intermittent group, and continuous group, and the effect of each variable on learning was changed to angle of the arms' we checked. Methods This study was conducted for 45 days from March 13 to 18, 2017 for five days in the 20 generals living in Changwon city. Dart and goniometer were used for the measurement. In the exercise program, darts were placed on a smooth, hard surface of 1.5M height and the distance to the subject was set 1.5m away. In the dart throw practice, all three groups were marked with an elbow flexion $30^{\circ}$ on the wall, and the subjects were instructed to throw the dart at that point. Results Comparisons between groups showed significant differences between the continuous task-oriented training group and the intermittent task-oriented training group and the control group at the end of training (*** P <0.001). Conclusion This study showed that the intermittent task-oriented training method showed the highest effect (*** P <0.001), which proved that the intermittent method is the most effective exercise method among the three groups.