• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2005년도 추계 종합학술대회 논문집
• /
• pp.407-411
• /
• 2005

본 연구에서는 자원재활용에 대한 이해를 돕기 위해, 어린이들의 흥미를 유발시키고 과학적인 호기심을 충족시키는 방식으로 3D 그래픽 편집기와 DirectX 프로그래밍 도구를 이용하여 3D 온라인 레이싱 게임을 개발하였다. 단순히 게임에 참여하는 것만으로도 자연스럽게 재활용자원의 수집과 분류 과정을 체험할 수 있으며, 애니메이션 기법으로 제작된 재활용 공정 콘텐츠를 학습할 수 있도록 하였다. 특히, 한글뿐만 아니라 영어 버전을 동시에 제공함으로써 해외에서도 교육 및 홍보 매체로 활용될 수 있으며 해외기관과의 교류가 가능하도록 하였다. 결과적으로 어린이들이 직접 즐길 수 있는 게임의 형태로 개발되어 자원재활용에 대한 교육용 콘텐츠로 활용될 수 있다.

• 한국환경보건학회지
• /
• 제39권3호
• /
• pp.248-255
• /
• 2013

Objectives: The purpose of this paper is to define the level of recycling standards and its process in paper scrap. As pollution is increased by improperly treated paper scrap, the government has recently strengthened the management of the paper scrap. Methods: In this study, the current status of paper scrap recycling was investigated through a 2012 field survey, and the classification and recycling standards for paper scrap in developed countries and institutions were also investigated through a literature review in order to introduce optimal recycling standards. Results: As a result, the contents of contaminants were identified as the most important recycling standard, and the contents of contaminants in paper scrap was measured at less than 1.0% at most companies. The recycling standard for paper scrap was determined to be below 3% contaminants in the case of paper and 5% in the case of board. In this study, recycling stage was determined by considering regulations on resources and practices in the field. Conclusions: The recycling standard for paper scrap was determined to be below 3% and 5% contaminants for paper and board, respectively.

• 한국환경보건학회지
• /
• 제37권2호
• /
• pp.150-158
• /
• 2011

This research was conducted to estimate the physicochemical characteristics of waste catalyst and its in-process product from recycling and to suggest fundamental data for religious systems such as quality standards. Mo and V contents were increased from the waste catalyst to calcinated material and oxidized material. In the results of a heavy metals leaching test, Pb was not detected in any catalyst, calcinated and oxidized materials. Cu was not detected in the catalyst. However, it was detected in ${\leq}$1.16 mg/l for calcinated material and in 1.34~13.73 mg/l for $MoO_3$ oxidezed material. Concentrations in recycling in-process products (calcinated and oxidized materials) were higher than those of waste catalyst. Oil content of catalyst waste ranged from 0.01-14.03 wt%. Oil contents of calcinated and oxidized materials were greatly decreased compared to the catalyst waste. Carbon and sulfur contents as chemical poisoning material of catalyst waste ranged from 0.33-76.08 wt% and 5.00-22.00 wt%, respectively. The carbon contents of calcinated and oxidized materials showed below 20 wt%. The sulfur content showed below 8wt% for calcinated material and below 0.22 wt% for oxidized material.

• 한국콘텐츠학회논문지
• /
• 제14권9호
• /
• pp.110-119
• /
• 2014

제품을 디자인 할 때는 제품뿐만 아니라 생활 속에서의 역할까지 고려해 사용 환경 및 경험까지 반영함으로써 제품의 역할과 사용자 사이에 상호작용이 이루어지도록 해야 한다. 따라서 쓰레기 분리수거함의 디자인 역시 단순히 색채, 외형, 소재뿐만 아니라 사용과정 및 사용경험까지 두루 고려할 필요가 있다. 본 논문은 베이징 공공장소의 쓰레기 분리수거함을 대상으로 조사를 진행하였다. 연구진행방법으로, 첫째, 쓰레기 분리수거함의 개념을 정의하고 베이징시의 쓰레기 분리수거 시행의 의의 및 현재 추진 중에 있는 쓰레기 분리수거 장려정책에 대한 선행 연구를 진행하였다. 둘째, 캠퍼스에서 설문조사를 통하여, 베이징시의 쓰레기 분리수거 현황과 쓰레기 분리수거함의 문제점들을 분석하였다. 마지막으로 쓰레기 분리수거함의 사용자의 심리적인 요구사항을 조사 및 분석함으로써 향후 쓰레기 분리수거함의 개발 방향을 제시하였다.

• 펄프종이기술
• /
• 제43권3호
• /
• pp.11-20
• /
• 2011

The conditions to which pulp fibers are exposed during paper production, converting, storage, use, and recycling can induce various changes in fiber morphology, surface characteristics, and suitability for paper production by recycled fibers. Most of those changes can be described by hornification. Paper has highly hygroscopic properties which affect dimensional change by relative humidity variation of surrounding condition. The purpose of this study was to investigate the dimensional stability, moisture contents and dip elongation of handsheets at different relative humidity conditions of recycled kraft pulp and BCTMP. By using recycled fibers, dimensional stability was increased because hygroscopic properties of fibers decreased with repeated recycling treatment. Dip elongation of recycled pulp was higher than that of virgin pulp because of its weak fiber-to-fiber bonding. By recycling pulp, the relative bonded area was decreased because fiber could not swell more than virgin pulp. Dimensional stability largely depended on the equilibrium moisture contents of paper, the fiber-to-fiber bonding strength, and the relative bonded area.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.660-663
• /
• 2004

This paper investigate the qualities variety of concrete using recycling water under various kinds and contents of saccaric based stabilizing agent(SSA). Fluidity had little changes with the kinds and contents of SSA. Air contents of concrete with recycled water only shows the tendency. With an increase in SSA contents, air content recovered. For bleeding properties, bleeding shows to be decreased with an increase in SSA contents. The use of recycled water accelerated the setting time. However, with an increase in SSA, setting time showed the similar level of plain concrete. SSA (Btype) had better performance in enhancing compressive strength owing to loss of air content. Although the use of recycled water increased the drying shrinkage compared with that of plain concrete, it tended to decrease with an increase in SSA.

• International Journal of Contents
• /
• 제9권4호
• /
• pp.22-29
• /
• 2013

In this paper, we propose a integrated real-time monitoring system for recycling agriculture resourcing based on USN. We design and implement the monitoring system so that we can integrate the quality control of farmyard and liquid manures, barn environment monitoring, and positioning information control into a total management system performing recycling of excrement and manure. Selection of sensors and sensor-node construction and requirements, structure of wire/wireless communication networks, and design of monitoring program are also presented. As a result of operating our system, we can get over various drawbacks of conventional separated system and promote the proper circulation of excrement up to the farmyard. We confirm that these advanced effects arise from the effective management of the total system integrating quality control of farmyard/liquid manure, barn/farmhouse information, and vehicle moving monitoring information etc. Moreover, this monitoring system is able to exchange real-time information throughout communication networks so that we can construct a convenient information environment for agricultural community by converging IT technology with farm and stockbreeding industries. Finally we present some results of processing using our monitoring system. Sensing data and their graphs are processed in real-time, positioning information on the v-world map offers various moving paths of vehicles, and statistical analysis shows all the procedure from excrement occurrence to recycling and resourcing.

• 한국환경교육학회지:환경교육
• /
• 제24권2호
• /
• pp.54-69
• /
• 2011

The objectives of this study were to investigate the need for school uniform recycling and to review the school uniform recycling-related education. 231 female high school students were asked to answer regarding the wearing state of school uniform and their satisfaction level. 10 subjects in middle school technology/home economy were evaluated. As the result, the students wore 1~2 pieces of school uniform, which showed that it was hard to keep them clean by washing them often. The satisfaction level of school uniform was not high, The lowest item was the price. Therefore, to increase the satisfaction level of the school uniforms and also to increase the sanitary level of the school uniforms, it was advisable to purchase a recycled school uniform at cheaper prices to have an extra set. For a vitalization of the recycled school uniforms, the middle school technology/home economy subjects were reviewed. In the topic of "clothing acquisition plan and purchase", the themes of planned purchase, overconsumption of clothing and environmental pollution were discussed and included preferable behaviors for disposal. The topic of "clothing manufacturing and recycling" listed recycling the clothes that are not worn or exchanging them with neighbors as well as suggesting methods to illicit environment-friendly behaviors and carrying them out. However, some textbooks only briefly explained the methods of recycling and more detailed and practical methods need to be suggested in the curriculum. In addition, the contents regarding the environment in the clothing topic need to be supplemented more and more changes, such as related education plans or data development, are required. The objectives of this study were to investigate the need for school uniform recycling and to review the school uniform recycling-related education. 231 female high school students were asked to answer regarding the wearing state of school uniform and their satisfaction level. 10 subjects in middle school technology/home economy were evaluated. As the result, the students wore 1~2 pieces of school uniform, which showed that it was hard to keep them clean by washing them often. The satisfaction level of school uniform was not high, The lowest item was the price. Therefore, to increase the satisfaction level of the school uniforms and also to increase the sanitary level of the school uniforms, it was advisable to purchase a recycled school uniform at cheaper prices to have an extra set. For a vitalization of the recycled school uniforms, the middle school technology/home economy subjects were reviewed. In the topic of "clothing acquisition plan and purchase", the themes of planned purchase, overconsumption of clothing and environmental pollution were discussed and included preferable behaviors for disposal. The topic of "clothing manufacturing and recycling" listed recycling the clothes that are not worn or exchanging them with neighbors as well as suggesting methods to illicit environment-friendly behaviors and carrying them out. However, some textbooks only briefly explained the methods of recycling and more detailed and practical methods need to be suggested in the curriculum. In addition, the contents regarding the environment in the clothing topic need to be supplemented more and more changes, such as related education plans or data development, are required.

• 펄프종이기술
• /
• 제41권2호
• /
• pp.55-63
• /
• 2009

This study was performed to evaluate the heavy metal contents in various packaging board. Domestic and foreign OCC (old corrugated containers) and old duplex boards were used as raw materials. Tests were made for the printed and unprinted parts of the sample. Heavy metal contents of old food packaging boards made from virgin pulp fibers were also evaluated. The contents of heavy metals including lead (Pb), cadmium (Cd), barium (Ba), arsenic (As), antimony (Sb), selenium (Se), and mercury (Hg) were determined using ICP-AES (Inductively Coupled Plasma - Atomic Emission Spectrometer), and CV-AAS (Cold vapor-atomic absorption spectrometer) after digesting the samples in a microwave oven. The contents of heavy metals contained in domestic packaging board were higher than those in overseas samples, and OCC showed higher contents of heavy metals than old duplex boards. Printed parts gave greater heavy metal contents than unprinted parts. Results indicate that recycling of paper and paperboard products increases the heavy metal contamination of the paper packaging products and this derives mostly from the heavy metals contained in printing inks. Recycling processes that decrease heavy metals in recycled fibers and new printing inks that contains less heavy metals should be developed to solve the problem associated with the heavy metals in packaging paper products.

• 한국멀티미디어학회논문지
• /
• 제13권12호
• /
• pp.1832-1842
• /
• 2010

This paper introduces a new automatic processing system: "Contents Factory" for the mass production of contents. Through the contents factory, we provide an authoring environment to improve the usability and the efficiency in producing contents. The contents factory integrates recycling techniques for contents resources, contents development engines, authoring tools, and interfaces into a total processing system. Since it is multi-platform based including mobile devices as well as PCs, one can easily produce complete PC and mobile contents from raw resources. We produced an example, "Sejong square" via the contents factory in order to demonstrate its effectiveness and usability.