• Environmental Engineering Research
• /
• 제16권3호
• /
• pp.165-173
• /
• 2011

The equilibrium and kinetic adsorption of arsenic on six different adsorbents were investigated with one synthetic and four natural types (two surface and two ground) of water. The adsorbents tested included magnetic ion exchange resins (MIEX), hydrous ion oxide particles (HIOPs), granular ferric hydroxide (GFH), activated alumina (AA), sulfur modified iron (SMI), and iron oxide-coated microsand (IOC-M), which have different physicochemical properties (shape, charge, surface area, size, and metal content). The results showed that adsorption equilibriums were achieved within a contact period of 20 min. The optimal doses of adsorbents determined for a given equilibrium concentration of $C_{eq}=10\;{\mu}g/L$ were 500 mg/L for AA and GFH, 520-1,300 mg/L for MIEX, 1,200 mg/L for HIOPs, 2,500 mg/L for SMI, and 7,500 mg/L for IOC-M at a contact time of 60 min. At these optimal doses, the rate constants of the adsorbents were 3.9, 2.6, 2.5, 1.9, 1.8, and 1.6 1/hr for HIOPs, AA, GFH, MIEX, SMI, and IOC-M, respectively. The presence of silicate significantly reduced the arsenic removal efficiency of HIOPs, AA, and GFH, presumably due to the decrease in chemical binding affinity of arsenic in the presence of silicate. Additional experiments with natural types of water showed that, with the exception of IOC-M, the adsorbents had lower adsorption capacities in ground water than with surface and deionized water, in which the adsorption capacities decreased by approximately 60-95%.

• 한국실천공학교육학회논문지
• /
• 제4권1호
• /
• pp.72-79
• /
• 2012

컴퓨터 관련 산업의 발전과 함께 컴퓨터를 이용한 교육의 향상도 같이 이루어지고 있으며, 그 중에서 가상 훈련(Virtual Training, VT)은 가장 주목 받고 있는 미래형 교육 매체 중 하나이다. 이러한 추세에 따라 많은 양의 가상 훈련용 3D 모델들이 개발되고 있으나, 이들을 통합적으로 관리하여 재사용을 편리하게 하는 시스템에 대한 연구는 부족하다. 본 논문에서는 3D 모델들을 통합적으로 관리할 수 있는 시스템을 제안한다. 컨텐츠 저작도구들에서 편리하게 이용할 수 있는 모델 형식에 대해 조사하며, 중앙 서버에 저장하는 방법에 대해 연구한다. 3D 모델을 저장하기에 알맞은 DB 구조를 설계하고, 모델을 검색하고 인출하기 편한 방법에 대해 제안한다. 본 논문에서 개발된 관리 시스템 소프트웨어를 통해 3D 모델의 재사용이 촉진될 것이 기대된다.

• 디지털융복합연구
• /
• 제19권1호
• /
• pp.389-399
• /
• 2021

본 논문의 연구배경은 플로우 이론을 적용한 u-융합정보시스템이 관광객의 만족도 측정이 부족하기 때문에 연구를 시작하게 되었다. 본 연구의 목적 및 연구 방법은 다음과 같다. 첫째는 플로우 관계정보 표시형식 알고리즘 제안이다. 둘째는 이 알고리즘과 플로우 이론을 접목시켜 콘텐츠 정보품질과 관광객의 성격 유형에 따라 패턴 알고리즘을 생성한 것이다. 본 연구의 기대효과는 플로우 관계정보 표시형식과 관광객의 성격 유형에 따라 패턴 알고리즘을 생성함으로서 u-융합정보시스템의 성공요인을 도출한 것이다. 본 논문의 한계성은 한 지역을 한정적으로 하였으며 데이터의 부족과 소규모 지역으로 객관성이 떨어진다. 추후, 다른 관광지에 제시하는 방법 적용 후, 분석을 통해 효용성을 평가할 필요가 있다. 향후 과제는 전문가 집단의 데이터 보완이 필요하고 여러 지역의 객관성이 보완되어야 할 것이다.

• 한국의류산업학회지
• /
• 제10권4호
• /
• pp.436-444
• /
• 2008

Recycle fashion is suggested to the suitable alternative of the environmental problem and the exhaustion of natural resources. The purpose of this study is focused on trying to comprehend between design characteristics and aesthetic values of recycle fashion design and those from fashion brands, fashion designers, and the public. For such purpose, 1553 photos of recycle fashion design which appeared in web-site, newspaper, fashion magazines between 2002 and 2007 were analyzed. Method of analysis did content analysis. The results of the research can be summarized as follows. First, design characteristics of recycle fashion were expressed by Junk Recycle Look, Vintage Recycle Look, Contemporary Recycle Look, Artisanal Recycle Look. Second, the expression methods of recycle fashion were presented reuse, reform, and regeneration. Third, aesthetic values of recycle fashion can be explained by the promotion of environment, the variableness, and the deconstruction.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.715-718
• /
• 2001

This study uses traditional alum coagulation and sedimentation process to treat CMP wastewater from cleaning after polishing. The primary goal is to successfully recycle both solid fines and water for semiconductor manufacturing. Results indicated that CMP wastewater may be successfully treated to recover clean water and fine particles by alum coagulation. The optimum operating conditions for coagulation are as fellowing: alum dosage of 10 ppm, pH at 5, rapid mixing speed at 800 rpm, 5 min rapid mixing time, and long slow mixing time. The treated water with low turbidity and an average residual aluminum ion concentration of 0.23 ppm may be considered for reuse. The settled sludge after alum coagulation contains mainly SiO$_2$particle with a minor content of aluminum (1.7 wt%) may be considered as raw materials for glass and ceramic industry.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.101-102
• /
• 2012

A policy for recycling waste concrete has been extensively studied, but it is still lacking to recycle and reuse as a cementitious powder, and the property has big different depending on the aggregate rates. In this study, the amount of cement powder according to the internal properties of the aggregate were mixed. From as a result, Concrete Powder to play inside the aggregate composition of the cement composition CaO rigs that causes loss of power and strength reduction due to rising real water cement ratio will affect large.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.493-496
• /
• 2005

The Re-mi-con sludge water has been investigated because of environmental pollution and disposal cost. So, sludge water is partially reused as mixing water. However, if sludge water is reused too much that would influence the quality of concrete. KS specification limits the amount of sludge content up to 3$\%$ of cement weight. In this study, the effect of re-mi-con sludge on the characteristics of concrete is compared to raise the reuse ratio of re-mi-con sludge. From the test results, as blending ratio of re-mi-con sludge increases, workability is decreases. However, the re-mi-con sludge water have a minor effect on the strength development, the drying shrinkage and the resistance of freeze and thawing. Also, the existing model codes of drying shrinkage do not coincide with the test results of this study.

• 한국건설순환자원학회논문집
• /
• 제3권1호
• /
• pp.80-86
• /
• 2007

In this study we experimented setting time and basic properties as waste wood fiber and sodium silicate substitution rate to reuse waste wood fiber produced in construction field to wood chip board. To do this construction waste woods were crushed with the size less than 10mm, mixed with the rate of 1:2, 2.5, 3, and added sodium silicate with the rate of 0, 5% of cement content. The results are as follows. As the substitution rate of construction waste wood was increased delay of setting time was also increased, and the batch of adding 5% accelerator had a 13~17 hours faster setting time than non accelerator batch. The compressive strength was lower as wood substitution rate was higher, and as the specific gravity was higher, the strength was also higher. As wood substitution rate was higher, heat conductivity was lower, and as specific gravity was higher, heat conductivity also was higher.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.205-208
• /
• 2004

The purpose of this study is to recycle waste concrete and reuse reclaimed asphalt concrete as a concrete coarse aggregate. In this experiment, recycled coarse aggregate was substitute for natural crushed aggregate at the rate of 0, 30, $50\%$, and reclaimed asphalt concrete was substitute for recycled coarse aggregate at the rate of 0, 10, 20, $30\%$. According to the experimental results, as the reclaimed asphalt concrete content has influence on the properties of recycled aggregate concrete such as compressive and tensile strength, the criteria for the substitute ratio should be required to be set.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.897-900
• /
• 2006

This study concerned the quantification of environmental aggressiveness of concrete structure building up and applied to design of concrete structure. Only the content of carbon dioxide evacuated in the process of fabricating concrete structure was taken as an environmental load and various parameters, for example, material production, transportation, building-up, destruction and reuse were considered. Also, the life span of a concrete structure was taken into account in evaluating the carbon dioxide evolution. Consequently a single equation for the environmental load was obtained, which were subsequently used to assess the effect of high strength/durable concrete structures.