• Journal of KIISE:Information Networking
• /
• v.35 no.6
• /
• pp.549-556
• /
• 2008

To achieve flexible visual content adaption for multimedia communications, the ISO/IEC MPEG & ITU-T VCEG form the JVT to develop SVC amendment for the H.264/AVC standard. JVT uses inter-layer prediction as well as inter prediction and intra prediction that are provided in H.264/AVC to remove the redundancy among layers. The main goal consists of designing inter-layer prediction tools that enable the usage of as much as possible base layer information to improve the rate-distortion efficiency of the enhancement layer. But inter layer prediction causes the computational complexity to be increased. In this paper, we proposed an efficient residual prediction. In order to reduce the computational complexity while maintaining the high coding efficiency. The proposed residual prediction uses modified interpolation that is defined in H.264/AVC SVC.

• Animal cells and systems
• /
• v.9 no.2
• /
• pp.57-64
• /
• 2005

Cortical reaction and polyspermy block are well defined in most marine invertebrates. In Urechis species, the function of cortical granules (CGs) is not yet known, and there is controversy on whether the cortical reaction occurs, or the fertilization envelope (FE) is attributed to CG releases or functions to prevent polyspermy. This study was carried out to determine the cortical reactions and functions of the FE in Urechis unicinctus. Artificial insemination of the eggs revealed that CG release occurred to give rise to perivitelline space (PS) into the final FE. Both PS and final FE effectively blocked polyspermy. The final FE was accomplished within 10 min after sperm-egg initial binding. No massive release of CGs occurred within the early phase of 5 min after the initial binding, initially and the PS seemed to playa role to prevent polyspermy. The CG massively released its content into the PS in late phase of FE formation, and differentiated PS into five intermediate layers. The layers opened into each other by anastomosis, so that the final FE consisted of two layers, the inner layer ($15{\mu}m$ in thickness) and the outer layer ($1{\mu}m$ in thickness). The outer layer derived from vitelline layer and the inner layer consisted of PS and CG secretions. Immunofluorescence and confocal laser microscopy revealed that the spermatozoon took up residence in the egg cortex during FE formation and successive meioses of the fertilized egg. These results suggest that both PS and final FE of U. unicinctus were equivalent to the early and late block, respectively, of other marine animals.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.6
• /
• pp.787-796
• /
• 2017

A low dimensional stability and poor bending strength properties were main problems in particleboard manufacturing. The objective of this research was to evaluate the effect of mixed wood species and urea-formaldehyde (UF) or urea-melamine-formaldehyde (UMF) resins on the physical and mechanical properties of three-layer particleboards. The ratio of face/core/back layer was 1 : 2 : 1. The resin content of 12% for both UF resins and UMF resins (UF/MF = 70/30% w/w) was used. The results of this study showed that the utilization of S.mahagony shaving using both UF and UMF resins caused a decrease in the thickness swelling and water absorption of the boards. Thickness swellings of particleboard made of Sengon/Sengon/Sengon (SSS), Mahogany/Mahogany/Mahogany (MMM), Sengon/Mahogany/Sengon (SMS), and Mahogany/Sengon/Mahogany (MSM) were in the range of 23%, 12~16%, 14~16%, and 13~21%, respectively. The board bonded with UMF resin demonstrated better dimensional stability than that bonded with UF resin alone. Modulus of elasticity (MOE) and modulus of rupture (MOR) of particleboards made of S. mahagony shaving in the surface layer in both MMM and MSM boards were better than those of the SSS and SMS. MOE of MMM and MSM board was in the ranges of 24,000 to $26,000kg.cm^{-2}$ and 18,000 to $21,000kg.cm^{-2}$ respectively. Meanwhile, the MOR of board was in the ranges of 200 to $240kg.cm^{-2}$ and 190 to $228kg.cm^{-2}$, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.11
• /
• pp.1610-1615
• /
• 2008

Natto is a Japanese traditional soybean product fermented by Bacillus natto. The effects of dried fermented soybean (natto) supplement on egg production and egg qualities of layer chickens was studied with regard to the effective use of various waste foods in Japan. Dried natto, prepared by heating at $60^{\circ}C$, was added to a basic diet at a level of up to 3%. Forty 166-wk-old layer chickens (Rhode Island Red) were randomly divided into 4 groups and five layer chickens were used in each group with two replicates. Layer chickens in group 1 were fed a basic diet as the control. The remaining 3 groups were fed the basic diet supplemented with dried natto at levels of 1, 2, and 3% (w/w), respectively. The result did not show improvements in egg production or feed conversion ratio of layer chickens even when 3% dried natto was added to the control diet. The egg qualities including egg weight, eggshell strength and thickness, yolk color, yolk weight, albumen height, and Haugh unit were also not improved. However, the feeding of dried natto changed the cholesterol content in the egg yolk. The supplementation of dried natto showed the tendency to decrease the yolk cholesterol after 12-wk of feeding compared to the control diet though it did not change plasma cholesterol levels in the blood. On the other hand, yolk cholesterol decreased significantly after 12-wk of feeding 3% dried natto (p<0.05).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.254.2-254.2
• /
• 2014

The Transmission Fourier Transform Infrared spectroscopy (FTIR) of SiOx charge storage layer with the richest silicon content showed an assignment at peaks around 2000~2300 cm-1. It indicated that the existence of many silicon phases and defect sources in the matrix of the SiOx films. The total hysteresis width is the sum of the flat band voltage shift (${\Delta}VFB$) due to electron and hole charging. At the range voltage sweep of ${\pm}15V$, the ${\Delta}VFB$ values increase of 0.57 V, 1.71 V, and 13.56 V with 1/2, 2/1, and 6/1 samples, respectively. When we increase the gas ratio of SiH4/N2O, a lot of defects appeared in charge storage layer, more electrons and holes are charged and the memory window also increases. The best retention are obtained at sample with the ratio SiH4/N2O=6/1 with 82.31% (3.49V) after 103s and 70.75% after 10 years. The high charge storage in 6/1 device could arise from the large amount of silicon phases and defect sources in the storage material with SiOx material. Therefore, in the programming/erasing (P/E) process, the Si-rich SiOx charge-trapping layer with SiH4/N2O gas flow ratio=6/1 easily grasps electrons and holds them, and hence, increases the P/E speed and the memory window. This is very useful for a trapping layer, especially in the low-voltage operation of non-volatile memory devices.

• Applied Chemistry for Engineering
• /
• v.31 no.5
• /
• pp.568-574
• /
• 2020

Gas diffusion layer (GDL) is one of the main components of PEMFC as a pathway of reactants from a flow field to an electrode, water transport in reverse direction, heat management and structural support of MEA. In this study, the effect of GDL on fuel cell performance was investigated for commercial products such as 39BC and JNT30-A3. Polarization curve measurements were performed at different flow rates and relative humidity conditions using 25 ㎠ unit cell. The parameters on operating conditions were calculated using an empirical equation. The electrical resistance increased as the GDL PTFE content increased. The crack of microporous layer had influence on the concentration loss as water pathway. In addition, the ohmic resistance increased as the relative humidity decreased, but decreased as the current density increased due to water formation. Curve fitting analysis using the empirical equation model was applied to identify the tendency of performance parameters on operating conditions for the gas diffusion layer.

• Journal of Magnetics
• /
• v.21 no.1
• /
• pp.35-39
• /
• 2016

$Cr_{100-x}Ti_x$ amorphous texture-inducing layers (TIL) were investigated to realize highly (002) oriented $L1_0$ FePt-C granular films through hetero-epitaxial growth on the (002) textured bcc-$Cr_{80}Mn_{20}$ seed layer (bcc-SL). As-deposited TILs showed the amorphous phase in Ti content of $30{\leq}x(at%){\leq}75$. Particularly, films with $40{\leq}x{\leq}60$ kept the amorphous phase against the heat treatment over $600^{\circ}C$. It was found that preference of the crystallographic texture for bcc-SLs is directly affected by the structural phase of TILs. (002) crystallographic texture was realized in bcc-SLs deposited on the amorphous TILs ($40{\leq}x{\leq}70$), whereas (110) texture was formed in bcc-SLs overlying on crystalline TILs (x < 30 and x > 70). Correlation between the angular distribution of (002) crystal orientation of bcc-SL evaluated by full width at half maximum of (002) diffraction (FWHM) and a grain diameter of bcc-SL indicated that while the development of the lateral growth for bcc-SL grain reduces FWHM, crystallization of amorphous TILs hinders FWHM. $L1_0$ FePt-C granular films were fabricated under the substrate heating process over $600^{\circ}C$ with having different FWHM of bcc-SL. Hysteresis loops showed that squareness ($M_r/M_s$) of the films increased from 0.87 to 0.95 when FWHM of bcc-SL decreased from $13.7^{\circ}$ to $3.8^{\circ}$. It is suggested that the reduction of (002) FWHM affects to the overlying MgO film as well as FePt-C granular film by means of the hetero-epitaxial growth.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.4
• /
• pp.270-278
• /
• 2007

PEMFC electrodes with various gas diffusion layers (GDL) were characterized to find out the effect of GDL on fuel cell performance. The physical properties of GDL such as electric conductivity, porosity, air permeability, water flux, PTFE content, etc had close relationship each other and affected on the variation of the cell performance. It was observed that the micro-porous layer (MPL) on carbon paper or cloth changed the physical properties of GDL and changed the cell performance. The variation of cell performance as a function of the physical properties of GDL showed different behaviors according to the amount of current density.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5B
• /
• pp.517-525
• /
• 2009

We propose a quality guaranteed scalable video streaming service over the Internet using a new rate adaptation algorithm. Because video data requires much more bandwidth rather than other types of service, therefore, quality of video streaming service should be guaranteed while providing friendliness with other service flows over the Internet. To successfully provide this, we propose a framework for providing quality-guaranteed streaming service using two-channel transport layer and rate adaptation of scalable video stream. In this framework, baseline layer for scalable video is transmitted using TCP transport for minimum qualify service. Enhancement layers are delivered using TFRC transport with layer adaptation algorithm. The proposed framework jointly uses the status of playout buffer in the client and the encoding rate of layers in media contents. Therefore, the proposed algorithm can remarkably guarantee minimum quality of streaming service rather than conventional approaches regardless of network congestion and the encoding rate variation of media content.

• Structural Engineering and Mechanics
• /
• v.77 no.1
• /
• pp.137-149
• /
• 2021

In engineering design, the axial equivalent elastic modulus of laminated FRP pipe was mostly calculated by the average elastic modulus method or the classical laminated plate theory method, which are based on relatively simplified assumptions, and may be not accurate enough sometimes. A new analytical calculation method for the axial equivalent elastic modulus of laminated FRP pipe was established based on three-dimensional stress state. By comparing the results calculated by this method with those by the above two traditional analytical methods and the finite element method, it is found that this method for the axial equivalent elastic modulus fits well not only for thin-walled pipes with orthotropic layers, but also for thick-walled pipes with arbitrary layers. Besides, the influence of the layer stacking on the axial equivalent elastic modulus was studied with this method. It is found that a proper content of circumferential layer is beneficial for improving the axial equivalent elastic modulus of the laminated FRP pipe with oblique layers, and then can reduce its material quantity under the premise that its axial stiffness remains unchanged. Finally, the meso-mechanical mechanism of this effect was analyzed. The improving effect of circumferential layer on the axial equivalent elastic modulus of the laminated FRP pipe with oblique layers is mainly because that, the circumferential fibers can restrain the rigid body rotations of the oblique fibers, which tend to cause the significant deformations of the pipe wall units and the relatively low axial equivalent elastic modulus of the pipe.