• Title/Summary/Keyword: Content element analysis

Search Result 370, Processing Time 0.031 seconds

Numerical Analysis of Laterally Displacing Abutment in High Landfill Slope (고성토사면에 시공된 교대의 측방유동에 대한 수치해석적 연구)

  • Park, Min-Cheol;Jang, Seo-Yong;Shin, Baek-Chul;Han, Heui-Soo
    • Journal of the Korean GEO-environmental Society
    • /
    • v.13 no.2
    • /
    • pp.27-39
    • /
    • 2012
  • This research is to propose the reinforcing method and design code for the lateral behaviors of the abutment displacement induced from the rainfall infiltration on high landfill slope. First, to make the proper numerical analysis, in-situ soil (weathered granite soil) was taken, and the variance of strength parameters according to water content variance was examined by undrained direct shear test, furthermore, other soil parameters were calculated from the standard penetration test such as elastic modulus and Poisson's ratio etc,. Those parameters were used to calculate the lateral behavior of abutment by finite element method and the member force of pile in high landfill slope according to rainfall infiltration . From the results, the shoe displacement on abutment was calculated as 8.98cm, which is 3 times bigger than the allowable displacement, 3cm. To reinforce it, several reinforcing methods were selected and analyzed such as reinforced retaining wall, soil surcharge, pile reinforcing (5m enlargement, 3-line arrangement, 5m enlargement and 3-line arrangement). In case of 5m enlarged and 3-line arrangement piles, the lateral behavior of shoe showed lower value(2.26 cm) than allowable displacement.

A Study on the Comparative Analysis of the Description Rules of ISBD and KCR4 (ISBD 통합판과 KCR4 기술규칙 비교 연구)

  • Lee, Mihwa
    • Journal of the Korean BIBLIA Society for library and Information Science
    • /
    • v.24 no.2
    • /
    • pp.185-203
    • /
    • 2013
  • This study was to suggest the new rules for revision of KCR4 by comparing between ISBD consolidated edition and KCR4. The study methods was to compare the rules in each element after mapping the description elements in each area of ISBD and KCR4. Resultingly, first, content forms and media types must be included for describing resource types. Second, it is needed for rules about the common title and the dependent title. Third, it is needed for rules about "parallel" such as parallel title, parallel other title information, parallel statement of responsibility relating to title, parallel edition statement, parallel statement of responsibility relating to edition, parallel numbering system, parallel place of publication, production and distribution, et. al. Fourth, the rules about material or type of resource specific area must be regulated in terms of the contents of the resource. Fifth, the home country principle must be not applied in describing the place of publication, production and distribution for the consistency. Sixth, it is needed to regulate the extent, other physical details, dimensions, and accompanying material statement for all materials instead of the material description according to material types. Seventh, rule number of notes must be agreed to number of main rules. Eighth, it is needed for detailed rules about resource identifier. This study might be contributed to revise the KCR4.

Physiological Changes in Rooting Zone of Dwarf Apple Rootstocks (Malus domestica Borkh.) after Stem Etiolation Treatment (사과 왜성대목들의 줄기 황화처리에 따른 발근 부위의 생리적 변화)

  • Kwon, Soon-Il;Kim, Mok-Jong;Paek, Pong-Nyol;Nam, Jong-Chul;Kang, In-Kyu
    • Journal of Bio-Environment Control
    • /
    • v.16 no.2
    • /
    • pp.151-156
    • /
    • 2007
  • This work was conducted to investigate the important rooting factors through comparative analysis of a physiological differentiation after layering treatment using four apple rootstocks of different rooting abilities; M.26, M.9, O.3, and Mo.84. Mo.84 showed the highest rooting rate in from rootstocks, while O.3 was the lowest. Mo.84 also found to have the highest indole-3-acetic acid (IAA) content, although the fluctuation of IAA contents was not consistent with layering treatment. In contrast, abscisic acid (ABA) content of Mo.84 which showed highest rooting was lowest among rootstocks regardless of layering treatment. And ABA contents of all rootstocks were decreased after layering treatment than before layering treatment. O.3 which showed poor rooting rate revealed lowest in boron content. Carbohydrate/nitrogen (C/N) ratio of Mo.84 was the highest in all rootstocks. Therefor, we assumed that he IAA contents in layering treated rootstocks were not seemed to be a major rooting factor, but the changes in ABA contents and boron levels limit rooting in dwarf apple rootstocks.

A Study on Shot Segmentation and Indexing of Language Education Videos by Content-based Visual Feature Analysis (교육용 어학 영상의 내용 기반 특징 분석에 의한 샷 구분 및 색인에 대한 연구)

  • Han, Heejun
    • Journal of the Korean Society for information Management
    • /
    • v.34 no.1
    • /
    • pp.219-239
    • /
    • 2017
  • As IT technology develops rapidly and the personal dissemination of smart devices increases, video material is especially used as a medium of information transmission among audiovisual materials. Video as an information service content has become an indispensable element, and it has been used in various ways such as unidirectional delivery through TV, interactive service through the Internet, and audiovisual library borrowing. Especially, in the Internet environment, the information provider tries to reduce the effort and cost for the processing of the provided information in view of the video service through the smart device. In addition, users want to utilize only the desired parts because of the burden on excessive network usage, time and space constraints. Therefore, it is necessary to enhance the usability of the video by automatically classifying, summarizing, and indexing similar parts of the contents. In this paper, we propose a method of automatically segmenting the shots that make up videos by analyzing the contents and characteristics of language education videos and indexing the detailed contents information of the linguistic videos by combining visual features. The accuracy of the semantic based shot segmentation is high, and it can be effectively applied to the summary service of language education videos.

Effect of Niobium and Tin on Mechanical Properties of Zirconium Alloys (Zr 합금의 기계적 특성에 미치는 Nb와 Sn의 영향)

  • Kim, Gyeong-Ho;Choe, Byeong-Gwon;Baek, Jong-Hyeok;Kim, Seon-Jae;Jeong, Yong-Hwan
    • Korean Journal of Materials Research
    • /
    • v.9 no.2
    • /
    • pp.188-194
    • /
    • 1999
  • To investigate the effect of niobium and tin on the mechanical properties of zirconium alloys, the tensile test and the microstructural analysis were performed on the Zr-based binary(Zr-xNb, Zr-xSn) and ternary(Zr-0.8Sn-xNb, Zr-0.4Nb-xSn) alloys. As the content of Nb or Sn element increased, the strengths of the Zr-based alloys tended to gradually increase. The increase of mechanical strength was remarkable strength was remarkable in the range more than the solubility of Nb and Sn. The strengthening effects were discussed on the basis of the solid solution hardening, the precipitate hardening, the grain size effect, and the texture effect. The mechanical strength is mainly controlled by the solid solution hardening and additionally by the precipitate hardening in the content more than solubility limit of Nb and Sn. The grain refinement also has a slight effect on the strength of the zirconium alloys with the addition of Nb and Sn. However, the texture effect can be excluded due to the same Kearns number regardless of the content of alloying elements.

  • PDF

A Study of the Secondary School Science Teachers' Perceptions Related to Basic Particles (중등 과학 교사들의 기본 입자에 대한 사고 조사)

  • Nam, Cho-Yi;Park, Kyu-Suk;Paik, Seoung-Hey
    • Journal of the Korean Chemical Society
    • /
    • v.53 no.6
    • /
    • pp.774-783
    • /
    • 2009
  • The purpose of this study was to survey the secondary science teachers' viewpoints of basic particles conceptions addressed in science course. The first content of this study was to analyze the secondary science teachers conceptions related to basic particles founded on scientific history viewpoints. The second content was to investigate their understanding of relations between atom, element, and molecule concepts. The third content was to search the factors influenced on basic particles conceptions of science teachers. For this study, 96 secondary science teachers were selected. The data of this study were collected through a questionnaire developed for this study and were analysed using the method of constant comparative analysis. The results showed that their viewpoints towards basic particles were similar to each other regardless of their majors and their conceptions belonged to the past viewpoints. The teachers lacked linking understand among basic particles conceptions because they applied different viewpoints on different problems. Most of the teachers were influenced on science textbooks, guidebooks for teachers, and reference books to form confusing viewpoints of basic particles.

Effect of Cu content on Hot Tearing Susceptibility in Al-Si-Cu Aluminum Casting Alloy (Al-Si-Cu 알루미늄 주조 합금의 열간 균열 민감성에 미치는 Cu 함량의 영향)

  • Oh, Seung-Hwan;Munkhdelger, Chinbat;Kim, Heon-Joo
    • Journal of Korea Foundry Society
    • /
    • v.41 no.5
    • /
    • pp.419-433
    • /
    • 2021
  • Al-Si-Cu alloys benefit from the addition of copper for better hardness and strength through precipitation hardening, which results in remarkably strong alloys. However, the addition of copper expands the solidification range of Al-Si-Cu alloys, and due to this, these alloys become more prone to hot tearing, which is one of the most common and serious fracture phenomena encountered during solidification. The conventional evaluation method of the hot tearing properties of an alloy is a relative and qualitative analysis approach that does not provide quantitative data about this phenomenon. In the present study, the mold itself part of a device developed in Instone et al. was partially modified to obtain more reliable quantitative data pertaining to the hot tearing properties of an Al-Si-Cu casting alloy. To assess the influence of Cu element, four levels of Cu contents were tested (0.5, 1.0, 3.0, and 5.0 wt.%) in the Al-Si-Cu system alloy and the hot tearing properties were evaluated in each case. As the Cu content was increased, the hot tearing strength decreased to 2.26, 1.53, 1.18, and 1.04 MPa, respectively. At the moment hot tearing occurred, the corresponding solid fraction and solidification rate decreased at the same temperature due to the increase in the solid-liquid coexistence range as the Cu content increased. The morphology of the fracture surfaces was changed from dendrites to dendrites covered with residual liquid, and CuAl2 phases were observed in the vicinity of hot tearing.

Case Study of Elementary School Classes based on Artificial Intelligence Education (인공지능 교육 기반 초등학교 수업 사례 분석)

  • Lee, Seungmin
    • Journal of The Korean Association of Information Education
    • /
    • v.25 no.5
    • /
    • pp.733-740
    • /
    • 2021
  • The purpose of this study is to present the direction of elementary school AI education by analyzing cases of classes related to AI education in actual school settings. For this purpose, 19 classes were collected as elementary school class cases based on AI education. According to the result of analyzing the class case, it was confirmed that the class was designed in a hybrid aspect of learning content and method using AI. As a result of analyzing the achievement standards and learning goals, action verbs related to memory, understanding, and application were found in 8 classes using AI from a tool perspective. When class was divided into introduction, development, and rearrangement stages, the AI education element appeared the most in the development stage. On the other hand, when looking at the ratio of learning content and learning method of AI education elements in the development stage, the learning time for approaching AI education as a learning method was overwhelmingly high. Based on this, the following implications were derived. First, when designing the curriculum for schools and grades, it should be designed to comprehensively deal with AI as a learning content and method. Second, to supplement the understanding of AI, in the short term, it is necessary to secure the number of hours in practical subjects or creative experience activities, and in the long term, it is necessary to secure information subjects.

Studies on the Mechanical Properties of Weathered Granitic Soil -On the Elements of Shear Strength and Hardness- (화강암질풍화토(花崗岩質風化土)의 역학적(力學的) 성질(性質)에 관(關)한 연구(硏究) -전단강도(剪斷强度)의 영향요소(影響要素)와 견밀도(堅密度)에 대(對)하여-)

  • Cho, Hi Doo
    • Journal of Korean Society of Forest Science
    • /
    • v.66 no.1
    • /
    • pp.16-36
    • /
    • 1984
  • It is very important in forestry to study the shear strength of weathered granitic soil, because the soil covers 66% of our country, and because the majority of land slides have been occured in the soil. In general, the causes of land slide can be classified both the external and internal factors. The external factors are known as vegetations, geography and climate, but internal factors are known as engineering properties originated from parent rocks and weathering. Soil engineering properties are controlled by the skeleton structure, texture, consistency, cohesion, permeability, water content, mineral components, porosity and density etc. of soils. And the effects of these internal factors on sliding down summarize as resistance, shear strength, against silding of soil mass. Shear strength basically depends upon effective stress, kinds of soils, density (void ratio), water content, the structure and arrangement of soil particles, among the properties. But these elements of shear strength work not all alone, but together. The purpose of this thesis is to clarify the characteristics of shear strength and the related elements, such as water content ($w_o$), void ratio($e_o$), dry density (${\gamma}_d$) and specific gravity ($G_s$), and the interrelationship among related elements in order to decide the dominant element chiefly influencing on shear strength in natural/undisturbed state of weathered granitic soil, in addition to the characteristics of soil hardness of weathered granitic soil and root distribution of Pinus rigida Mill and Pinus rigida ${\times}$ taeda planted in erosion-controlled lands. For the characteristics of shear strength of weathered granitic soil and the related elements of shear strength, three sites were selected from Kwangju district. The outlines of sampling sites in the district were: average specific gravity, 2.63 ~ 2.79; average natural water content, 24.3 ~ 28.3%; average dry density, $1.31{\sim}1.43g/cm^3$, average void ratio, 0.93 ~ 1.001 ; cohesion, $ 0.2{\sim}0.75kg/cm^2$ ; angle of internal friction, $29^{\circ}{\sim}45^{\circ}$ ; soil texture, SL. The shear strength of the soil in different sites was measured by a direct shear apparatus (type B; shear box size, $62.5{\times}20mm$; ${\sigma}$, $1.434kg/cm^2$; speed, 1/100mm/min.). For the related element analyses, water content was moderated through a series of drainage experiments with 4 levels of drainage period, specific gravity was measured by KS F 308, analysis of particle size distribution, by KS F 2302 and soil samples were dried at $110{\pm}5^{\circ}C$ for more than 12 hours in dry oven. Soil hardness represents physical properties, such as particle size distribution, porosity, bulk density and water content of soil, and test of the hardness by soil hardness tester is the simplest approach and totally indicative method to grasp the mechanical properties of soil. It is important to understand the mechanical properties of soil as well as the chemical in order to realize the fundamental phenomena in the growth and the distribution of tree roots. The writer intended to study the correlation between the soil hardness and the distribution of tree roots of Pinus rigida Mill. planted in 1966 and Pinus rigida ${\times}$ taeda in 199 to 1960 in the denuded forest lands with and after several erosion control works. The soil texture of the sites investigated was SL originated from weathered granitic soil. The former is situated at Py$\ddot{o}$ngchangri, Ky$\ddot{o}$m-my$\ddot{o}$n, Kogs$\ddot{o}$ng-gun, Ch$\ddot{o}$llanam-do (3.63 ha; slope, $17^{\circ}{\sim}41^{\circ}$ soil depth, thin or medium; humidity, dry or optimum; height, 5.66/3.73 ~ 7.63 m; D.B.H., 9.7/8.00 ~ 12.00 cm) and the Latter at changun-long Kwangju-shi (3.50 ha; slope, $12^{\circ}{\sim}23^{\circ}$; soil depth, thin; humidity, dry; height, 10.47/7.3 ~ 12.79 m; D.B.H., 16.94/14.3 ~ 19.4 cm).The sampling areas were 24quadrats ($10m{\times}10m$) in the former area and 12 in the latter expanding from summit to foot. Each sampling trees for hardness test and investigation of root distribution were selected by purposive selection and soil profiles of these trees were made at the downward distance of 50 cm from the trees, at each quadrat. Soil layers of the profile were separated by the distance of 10 cm from the surface (layer I, II, ... ...). Soil hardness was measured with Yamanaka soil hardness tester and indicated as indicated soil hardness at the different soil layers. The distribution of tree root number per unit area in different soil depth was investigated, and the relationship between the soil hardness and the number of tree roots was discussed. The results obtained from the experiments are summarized as follows. 1. Analyses of simple relationship between shear strength and elements of shear strength, water content ($w_o$), void ratio ($e_o$), dry density (${\gamma}_d$) and specific gravity ($G_s$). 1) Negative correlation coefficients were recognized between shear strength and water content. and shear strength and void ratio. 2) Positive correlation coefficients were recognized between shear strength and dry density. 3) The correlation coefficients between shear strength and specific gravity were not significant. 2. Analyses of partial and multiple correlation coefficients between shear strength and the related elements: 1) From the analyses of the partial correlation coefficients among water content ($x_1$), void ratio ($x_2$), and dry density ($x_3$), the direct effect of the water content on shear strength was the highest, and effect on shear strength was in order of void ratio and dry density. Similar trend was recognized from the results of multiple correlation coefficient analyses. 2) Multiple linear regression equations derived from two independent variables, water content ($x_1$ and dry density ($x_2$) were found to be ineffective in estimating shear strength ($\hat{Y}$). However, the simple linear regression equations with an independent variable, water content (x) were highly efficient to estimate shear strength ($\hat{Y}$) with relatively high fitness. 3. A relationship between soil hardness and the distribution of root number: 1) The soil hardness increased proportionally to the soil depth. Negative correlation coefficients were recognized between indicated soil hardness and the number of tree roots in both plantations. 2) The majority of tree roots of Pinus rigida Mill and Pinus rigida ${\times}$ taeda planted in erosion-controlled lands distributed at 20 cm deep from the surface. 3) Simple linear regression equations were derived from indicated hardness (x) and the number of tree roots (Y) to estimate root numbers in both plantations.

  • PDF

A Study on the Structural Design of Permeable Asphalt Pavement (투수성 아스팔트포장 구조설계방법에 관한 연구)

  • Lee, Soo-Hyung;Yoo, In-Kyoon;Kim, Je-Won
    • International Journal of Highway Engineering
    • /
    • v.13 no.3
    • /
    • pp.39-49
    • /
    • 2011
  • The porous pavement system is widely considered very effective in urban street because of its various benefits on safety and environment, but the pavement thickness design system has not been established yet. In porous pavement system. rainwater penetrates to the subgrade through porous pavements layers. Porous pavements are expected to reduce or alleviate the problems caused by impermeable pavement layer such as flood damage due to heavy rain in the city, drainage load, disorder in ecosystem, and heat island. However, its structural design methods in traffic roads has not been made mainly because of not being able to consider adequately the effect of rainwater on subgrade strength. In this study, structural design method of porous pavements is suggested after considering the subgrade weakness due to rainwater and numerical mechanical analysis. It is noted that elastic modulus of subgrade is reduced by 20% as subgrade moisture content is increased by 2% at optimum moisture content in the literature review. As a result of both finite element analysis and strength loss of subgrade by the existing design method, it is necessary to increase subbase thickness about 30cm in porous pavements compared with the existing traffic road pavement system. It is similar to premium thickness of structural design of porous pavements in Japan.