• Journal of Korean Society of Forest Science
• /
• v.103 no.4
• /
• pp.547-555
• /
• 2014

This study was carried out in order to investigate the germination and the early growth characteristics of Parasenecio firmus. Seed pre-treatment before the each experiment was carried out by shading treatment (with drying at room temperature (DRT), drying at low temperature (DLT) and water soaking (WS) for 48 hours). Experiment was performed by shading treatment (full sunlight, 35%, 50%, 75%, and 95% shading). Seeds of Parasenecio firmus were surveyed the highest germination rate (61.1%) in full sunlight with WS (overall 25.7~61.1%). Height was surveyed the highest under 95% shading. And root collar diameter was surveyed the highest in full sunlight. Fresh weights (leaf, shoot, root and total) were the highest under 50% shading. Dry weights (leaf, shoot and total) were the highest under 75% shading. It was indicated the lowest leaf, shoot, root and total under 95% shading. Leaf growth (leaf area, leaf length, leaf width and leaf thickness) and root growth (total root length, root project area, root surface area, root diameter and root volume) were good under 35%~75% shading, but the lowest under 95% shading. As a result of surveying the whole experiment, seed of Parasenecio firmus grows well under 50%~75% shading after germination by high sunlight with water soaking (WS).

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.07a
• /
• pp.25-37
• /
• 2002

The most important industrial application of gamma radiation in characterizing green compacts is the determination of the density. Examples are given where this method is applied in manufacturing technical components in powder metallurgy. The requirements imposed by modern quality management systems and operation by the workforce in industrial production are described. The accuracy of measurement achieved with this method is demonstrated and a comparison is given with other test methods to measure the density. The advantages and limitations of gamma ray densitometry are outlined. The gamma ray densitometer measures the attenuation of gamma radiation penetrating the test parts (Fig. 1). As the capability of compacts to absorb this type of radiation depends on their density, the attenuation of gamma radiation can serve as a measure of the density. The volume of the part being tested is defined by the size of the aperture screeniing out the radiation. It is a channel with the cross section of the aperture whose length is the height of the test part. The intensity of the radiation identified by the detector is the quantity used to determine the material density. Gamma ray densitometry can equally be performed on green compacts as well as on sintered components. Neither special preparation of test parts nor skilled personnel is required to perform the measurement; neither liquids nor other harmful substances are involved. When parts are exhibiting local density variations, which is normally the case in powder compaction, sectional densities can be determined in different parts of the sample without cutting it into pieces. The test is non-destructive, i.e. the parts can still be used after the measurement and do not have to be scrapped. The measurement is controlled by a special PC based software. All results are available for further processing by in-house quality documentation and supervision of measurements. Tool setting for multi-level components can be much improved by using this test method. When a densitometer is installed on the press shop floor, it can be operated by the tool setter himself. Then he can return to the press and immediately implement the corrections. Transfer of sample parts to the lab for density testing can be eliminated and results for the correction of tool settings are more readily available. This helps to reduce the time required for tool setting and clearly improves the productivity of powder presses. The range of materials where this method can be successfully applied covers almost the entire periodic system of the elements. It reaches from the light elements such as graphite via light metals (AI, Mg, Li, Ti) and their alloys, ceramics ($AI_20_3$, SiC, Si_3N_4, $Zr0_2$, ...), magnetic materials (hard and soft ferrites, AlNiCo, Nd-Fe-B, ...), metals including iron and alloy steels, Cu, Ni and Co based alloys to refractory and heavy metals (W, Mo, ...) as well as hardmetals. The gamma radiation required for the measurement is generated by radioactive sources which are produced by nuclear technology. These nuclear materials are safely encapsulated in stainless steel capsules so that no radioactive material can escape from the protective shielding container. The gamma ray densitometer is subject to the strict regulations for the use of radioactive materials. The radiation shield is so effective that there is no elevation of the natural radiation level outside the instrument. Personal dosimetry by the operating personnel is not required. Even in case of malfunction, loss of power and incorrect operation, the escape of gamma radiation from the instrument is positively prevented.

• Horticultural Science & Technology
• /
• v.18 no.6
• /
• pp.839-844
• /
• 2000

In developing of soil wetting agents using the mixture of polyoxyethylene octylphenyl ether [$C_8H_{17}O$ $(C_2H_4O)_{10}H$, POE] and polyoxyethylene+polypropyleneoxide tridecylether (1:1, w/w, CM-1), the effect of base carriers such as zeolite and vermiculite on changes of concentration of POE and on initial wetting of peat-vermiculite media were determined. The concentration of POE in the treatment of zeolite was higher than that of vermiculite. The treatments of POE+CM-1 with zeolite or vermiculite as carrier were effective in initial water retention of root media having about 510 mL of water per pot, where those of AquaGro and control had 490 mL and 400 mL of water per pot, respectively. In the evaporative water loss, the treatment of zeolite and AquaGro were faster than those of control and vermiculite. The treatment of AquaGro had faster water movement in root media than those of POE+CM-1 regardless of carriers and same trends were observed in the volume of water infiltrating into root media. Also, increasing the amount of POE+CM-1 resulted in increased water retention capacity, evaporative water loss, water movement in root media and amount of water infiltrating into root media.

• Journal of Korea Port Economic Association
• /
• v.35 no.4
• /
• pp.169-186
• /
• 2019

This study suggests a development direction by comparing the cargo throughput of the port of Yeosu-Gwangyang during 2007-2015 with that of domestic ports. It derived a concentration index (HHI) of cargo throughput in domestic ports by Yeosu-Gwangyang port docks, shipping companies, and abroad regions. The main results were as follows. First, in terms of total cargo handled, the port of Yeosu-Gwangyang was second only to the port of Busan, and the HHIs for the past nine years were relatively low. Second, the port of Yeosu-Gwangyang ranked first for total import and export cargo throughput, showing relatively stable HHIs from 2007 to 2015. Third, the HHIs of container handling performance by national shipping companies showed stable levels below 1,800. Fourth, there were no regions where cargo volume was noticeably concentrated in the port of Yeosu-Gwangyang, and it showed cargo throughput across various abroad regions. While changes in national shipping companies are expected after the Hanjin Shipping Crisis, there should be no serious concern regarding the dependence of the port of Yeosu-Gwangyang. It is expected to develop further by realizing the full use of all its facilities, diversifying the tenants in the Yeosu-Gwangyang area, and improving the demurrage rate.

• Korean Journal of Agricultural Science
• /
• v.37 no.2
• /
• pp.191-197
• /
• 2010

The objective of this research was to determine the influence of the physical and chemical properties of root substrates used during the production of 'Maehyang' strawberry propaguleson the growth of the mother plants and the rate of daughter plant formation. Plants were cultured in plastic bags containing six different formulations of root substrates composed of: a) 50% coir dust and 50% perlite (5:5 by volume, A), b) 60% coir dust and 40% perlite (6:4, B), c) 70% coir dust and 30% perlite (7:3, C), d) 70% coir dust and 30% coconut chip (7:3 D), e) 60% coir dust and 40% coconut chip (60:40, E), or f) 50% sphagnum peat and 50% vermiculite (50:50, F). All media formulations contained a moderate level of base fertilizers. Physical and chemical properties of each formulation were determined before plant establishment and after 120 days of stock plant culture and runner production. Total porosity (TP) and container capacity (CC) of all substrate formulations were higher than 85% and 55%, respectively, allowing a suitable range of air and water holding characteristics. Formulation F provided the highest TP and CC values among the all substrate modifications evaluated. Substrate formulations A, B, C and F had higher electrical conductivity (EC) and $NO_3{^-}$-N concentrations than formulations D and E, when determined before and after plant culture. Formulations A, B, C, and F, having higher EC readings, also performed better as root substrates thanthe formulations D and E in increasing fresh and dry weights of the runners as well as the production of daughter plants per plant. The 'Maehyang' strawberry plants grown in the formulation F had the highest tissue N content, followed by those grown in substrate B, A, C, or D for 120 days after transplanting. Formulation F also facilitated accumulation of higher tissue phosphorus (P) and copper (Cu) contents compared to other treatments. Results of this experiment suggest that the chemical properties, rather than physical properties, of root substrates had a major influence on the growth of mother plants and the occurrence of healthy daughter plants during the bag-culture phase of propagation.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.214-215
• /
• 2013

Current competition among companies than regional, the time constraints, it is globalization, Tilt the efforts of many to be operated by building the efficient distribution system to reduce logistics costs and improve customer service it is reality's there. Therefore, the need for industrial complexes environmentally friendly can be cost competitive companies perform cavitation region's increased. To build the distribution center these logistics system through a joint of freight and appropriate policy is required. In particular, efficient operation through the system construction of industrial complexes in the logistics system is very important in terms of friendly low-cost urban logistics, the environment. Since the traffic volume which is Jipufa and utilization of network is transported by a more appropriate technicians and means suitable operating model can efficiency is improved. However, despite these advantages, research network design has not been actively conducted due to the complexity of the problem. Therefore, in this study, by analyzing the logistics system, and presents the operating model through a simulation and basic settings for the model of the logistics complex based on the analysis result, the construction of infrastructure of logistics industry complex it is intended to present the article.

• Journal of Animal Environmental Science
• /
• v.11 no.1
• /
• pp.25-34
• /
• 2005

The study aimed to develop a tractor drawn animal slurry manure sub-soil injector for arable land and thus, can reduce the waste management cost through effective treatment and utilization of animal slurry manure. The application of animal slurry manure to agricultural land will probably be one of the most effective ways to enrich the soil with vital nutrients. However, some existing slurry manure spenders are not suitable in the field because of their adverse effects to the environment. Based on this premise, a prototype was designed and assembled using 5 sub-soiling standards attached to the sin injector device. The traction force of the Prototype measured in the depth of 10 cm and 15 cm from the ground surface of a paddy field was 1,062 kgf and 1,214 kgf, respectively. A unique feature of the machine was that there was an equal volume of slurry manure flowing from each delivery pipe and regulated by a pressurized container that was likewise synchronized with the speed of the tractor The sub-soiling manure injection system can mitigate or reduce the harmful emission of obnoxious gases and malodor during the injection operation.

• Journal of Animal Environmental Science
• /
• v.18 no.2
• /
• pp.63-74
• /
• 2012

This experiment was carried out to investigate the effect of different stocking rate on growth, cast production and conversion efficiency of organic matter to tissues of earthworm. The carbon and nitrogen ratio (C/N) of tested Korean cow manure was 25.1, it was estimated an adequate ratio as feed for earthworms. The different stocking rates were 1:8(S-1), 1:16(S-2), 1:32(S-3) 1:64(S-4) 1:128(S-5) and 1:256 (S-6) as the ratios of earthworm fresh weight to biomass of Korean cow manure, respectively. A stocking rate of 1:32(S-3) was obtained a significantly highest values of increasing rate and conversion efficiency of organic matter to earthworm tissues. The mean values of increasin g rate of fresh weight and conversion efficiency of organic matter to earthworm tissues were 10.63 mg/day and 6.65% at the ratio of 1:32(S-3) with a rearing volume was $56.6cm^3$. A stocking rate of 1:8(S-1) was obtained a highest ratio of vermicasts, but showed a negative values of increasing rate and conversion efficiency of organic matter to earthworm tissues, it may due to severely food competition between individuals during the rearing periods. The pH, total nitrogen, available phosphorus, cation exchange capacity and exchangeable cations of vermicasts tended to increase with stocking rate. Especially, available phosphorus, cation exchange capacity and exchangeable cations of vermicasts tended to increase with rearing progressed. Vermicasts have the potential for improving plant growth when amended to container medium and soil according to increased availability of nutrients and improved physicochemical properties.

• Journal of Korean Port Research
• /
• v.6 no.1
• /
• pp.93-110
• /
• 1992

The most change in this century is supposed to be declination of ideology, and block of world economy. Addition to down full of cold war atmosphere around Northeast Asia, not only economic and social mood in this region is dramatically changed, but also it gave birth to the block of Northeast economy that accerlated new hub of world economy. According to dramatic change of economic surroundings the dynamic potential of growth in this region will be guided to enlarge inter-regional trade and increase volume of trade, thus suggests to grow steadily transportation. cargos in this region will have to arrange the system of delivery and inner transportation, accessary facilities, inter-regional harbors if North America and EC has connected easily. As have accerlated GATT and UR represented multilateralism and regionalism, it has regulated to increase trades of region due to relief of the trade barrier through specific areas has agreed with separately. The flow of regionalism of world economy has appeared to realize EC and NAFTA centered U.S.A, and also has presented to free trade region or one-size market agreement in Asia as APEC, EAEG in Malaysia, and etc. In defense to this block and internationalism of world economy, Pusan has to come forward to the hub of Northeast others has proposed a project to dominate the Northeast, Economy Association Agreement as Far East comprehensive development project in USSR, Hunchun development project in NK, and East Sea development project in PRC, Niigate regional development in Japan, Duman River development project in NK, and East Sea development project in Korea. As this exercise has proceed, Pusan also have arranged development strategy definitely and prepared provisions systematically. Engaging to participate center of delivery system is meant to be completed complex functions, namely the transfer storage processing & assembly function of international commodity. Pusan has ability to be terminal point of TSR. it had been connected to EC as the biggest economy block and TKR as complex transportation root to Far East, it would be the center of inground and seabase delivery terminal to Rotterdom as the biggest container pier and major piers to North-East and South East Asia. In order to provide a Role of 21 century's internationalization, Pusan has appealed to participate in management information research and development connected to Pohang-Ulsan-Changwon-Masan, and has utilized efficiently the resources such as man, material, money and information.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.110-111
• /
• 2023

As carbon neutrality has recently emerged as a global issue, the carbon neutral roadmap of MOF has been established and various strategies have been proposed to achieve carbon neutrality in the entire marine industry. The port sector is also included in the target for greenhouse gas reduction, but emissions are not being measured due to limitations in data collection and no inventory construction. For building a carbon-neutral port, it is essential to calculate and forecast emissions and set reduction targets. Accordingly, in this study, CO₂ emitted from domestic port equipment was calculated according to the IPCC Guildeline's emission calculation method, and future emission was estimated. As a result of the analysis, about 420,000 tons of CO₂ was emitted based on the cargo volume in 2020, and emissions are expected to continue to increase in proportion to the increase and about 720,000 tons will be emitted by 2050. In order to achieve carbon neutrality of the port, it needs to promote emission reduction by converting the power source for oil-based equipment to eco-friendly fuel. Also container and miscellaneous ports which require complicated cargo handling need to effort to reduce CO₂.